1. Producto terminadoview
The Polibi Twin Size Wooden Platform Bed (Model WF196520AAK) is designed for comfort and durability. Featuring a paneled headboard and footboard, this bed frame integrates seamlessly with various home decor styles. Constructed from high-quality MDF and pine wood, it includes strong wooden slats and additional support legs to accommodate memory foam, latex, or spring mattresses without the need for a box spring. The design also offers 9.2 inches of under-bed clearance, providing convenient storage space.
Figure 1.1: Fully assembled Polibi Twin Size Wooden Platform Bed in white.
2. Información de seguridad
- Lea atentamente todas las instrucciones antes del montaje y uso.
- Mantenga todo el hardware y las piezas pequeñas fuera del alcance de los niños.
- Assemble the bed on a soft, clean surface (e.g., carpet) to prevent scratching.
- Asegúrese de que todos los pernos y tornillos estén bien apretados antes de usar. Revíselos periódicamente y ajústelos según sea necesario.
- No exceda la capacidad máxima de peso de 400 libras.
- Evite pararse o saltar sobre el marco de la cama.
- Utilice únicamente el grosor de colchón recomendado de 8 a 10 pulgadas.
3. Contenido del paquete
Before beginning assembly, verify that all components and hardware are present. If any parts are missing or damaged, contact customer support immediately.
Componentes:
- Cabecero (1)
- Estribo (1)
- Rieles laterales (2)
- Listones de madera (10)
- Patas de apoyo centrales (3)
Hardware:
- Bolts, Screws, Washers (various sizes)
- Hex Key / Allen Wrench (1)
4. Instrucciones de montaje
Estimated Assembly Time: 30-60 minutes. Two people are recommended for easier assembly.
Paso 1: Fije los rieles laterales a la cabecera y al pie de cama
Align the side rails with the pre-drilled holes on the headboard and footboard. Secure them using the provided bolts and washers. Ensure the slat support ledges on the side rails face inward.
Figure 4.1: Detail of side rail attachment to the headboard/footboard posts.
Paso 2: Instale las patas de soporte centrales
Attach the three center support legs to the designated crossbeams or slats. These legs provide additional stability and weight distribution for the mattress.
Figura 4.2: Example of a bed leg securely attached to the frame.
Paso 3: Colocar listones de madera
Distribute the 10 wooden slats evenly across the side rail support ledges. Secure each slat to the side rails using the provided screws. This step is crucial for mattress support and bed stability.
Figure 4.3: Wooden slats properly installed across the bed frame.
Figure 4.4: Detail of the slat support system ensuring mattress stability.
Paso 4: Ajuste final
Once all components are assembled, go back and carefully tighten all bolts and screws using the hex key. Do not overtighten, but ensure all connections are firm and secure.
5. Instrucciones de uso y funcionamiento
Colocación del colchón
Place your twin-size mattress directly onto the wooden slats. A box spring is not required for this platform bed. Ensure the mattress is centered and fits within the frame dimensions.
Almacenamiento debajo de la cama
The bed offers approximately 9.2 inches of clearance from the slats to the floor, providing space for storage bins or other items. Utilize this area to keep your room organized and clutter-free.
6. Mantenimiento
- Limpieza: Limpie las superficies de madera con un paño suave y seco.amp paño. Evite productos químicos agresivos o limpiadores abrasivos que puedan dañar el acabado.
- Comprobación del hardware: Periodically (every 3-6 months) inspect all bolts and screws. Re-tighten any loose hardware to maintain the bed's stability and prevent squeaking.
- Evite la humedad: Keep the bed away from excessive moisture or direct sunlight to prevent warping or fading of the wood.
7. Solución de problemas
Ruidos chirriantes:
- Solución: Check all bolts and screws and tighten them securely. Loose connections are a common cause of squeaking.
- Solución: Ensure slats are properly seated and secured. If a slat is rubbing against the frame, a thin piece of felt or fabric can be placed between them.
La cama se siente inestable:
- Solución: Verify that all support legs are firmly on the floor and not damaged.
- Solución: Re-check all assembly steps to ensure no parts were missed or incorrectly installed.
8. Especificaciones del producto
| Número de modelo | WF196520AAK |
| Tamaño | Mellizo |
| Dimensiones del producto (L x An x Al) | 76" de largo x 41.9" de ancho x 36" de alto |
| Color | Blanco |
| Material | MDF, madera de pino |
| Capacidad de peso | 400 libras |
| Peso del artículo | 46 libras |
| Grosor recomendado del colchón | 8-10 pulgadas |
| Requiere ensamblaje | Sí |
| Código Postal | 195358109939 |
Figure 8.1: Detailed dimensions of the Polibi Twin Size Wooden Platform Bed.
9. Garantía y atención al cliente
For warranty information or assistance with your Polibi Twin Size Wooden Platform Bed, please refer to the purchase documentation or contact Polibi customer support directly. Keep your proof of purchase for any warranty claims.
Información del contacto: Please visit the official Polibi websitio o la página de soporte de su minorista para obtener los detalles de contacto más actualizados.
