SHEHDS Zoom Par Light LED 18x18W Instruction Manual

1. Introducción

This manual provides detailed instructions for the safe operation, setup, and maintenance of your SHEHDS Zoom Par Light LED 18x18W. This professional stage lighting fixture features 18x18W RGBWAP 6-in-1 LEDs, offering a wide range of colors and a zoom function from 14 to 45 degrees. It supports DMX512 control, RDM function, sound activation, and various automatic modes, making it suitable for diverse lighting applications.

Image: SHEHDS LED Zoom Par Light illuminating a stage with various colors.

2. Instrucciones de seguridad

• Conecte siempre el aparato a un circuito con conexión a tierra para evitar el riesgo de electrocución.
• Asegúrese de que la potencia voltage coincide con el volumen especificadotage (AC90-240V, 50/60Hz) before operation.
• No abra la carcasa; no contiene piezas que el usuario pueda reparar. Encargue cualquier reparación a personal cualificado.
• Evite la exposición directa de los ojos a la fuente de luz, ya que puede causar daños oculares.
• Install the fixture in a well-ventilated area, away from heat sources, and ensure proper clearance for cooling.
• Monte el accesorio de forma segura utilizando el soporte adecuado.amps and safety cables to prevent accidental falls.
• Desconecte la alimentación antes de limpiar o realizar cualquier mantenimiento.

3. Producto terminadoview

3.1 Características

• Fuente de luz: 18x18W RGBWAP 6-in-1 LEDs (Red, Green, Blue, White, Amber, Purple).
• Función de zoom: Adjustable beam angle from 14 to 45 degrees.
• Modos de control: DMX512, Auto-run, Sound Activated, Master/Slave, RDM.
• Atenuación: Smooth electronic dimming (0-100%).
• Luz estroboscópica: Variable strobe effects.
• Mostrar: Digital LED display for mode and address settings.
• Alojamiento: Durable metal construction with a brushed finish.

3.2 Componentes

Familiarize yourself with the main components of the SHEHDS Zoom Par Light:

Imagen: Frente view of the SHEHDS Zoom Par Light, highlighting the LED array and adjustable bracket.

• Matriz de LED: 18 high-power RGBWAP LEDs.
• Lente: Optical lenses for beam shaping and zoom functionality.
• Soporte de montaje: Soporte ajustable para montaje en suelo o en estructura de celosía.
• Panel de control: Digital display and buttons (MENU, UP, DOWN, ENTER) for settings.
• ENTRADA/SALIDA DMX: 3-pin XLR connectors for DMX signal.
• Entrada/salida de energía: PowerCon compatible connectors for power daisy-chaining.
• Ventilador de enfriamiento: Ventilador integrado para gestión térmica.

Imagen: Detallada view of the rear control panel, showing the digital display, control buttons, DMX IN/OUT, and power connections.

4. Configuración

4.1 Montaje

The SHEHDS Zoom Par Light can be mounted in various positions:

• De pie en el suelo: Use the adjustable bracket to position the light on a flat, stable surface.
• Montaje en armadura: Adjuntar cl apropiadoamps (not included) to the mounting bracket and secure to a truss system. Always use a safety cable.
• Montaje en pared: Secure the bracket to a sturdy wall using appropriate hardware. Ensure the mounting surface can support the fixture's weight.

Ensure the fixture is securely fastened and that there is sufficient space around it for ventilation.

4.2 Conexión de alimentación

Connect the provided power cable to the Power IN port on the fixture and then to a suitable power outlet (AC90-240V, 50/60Hz). Multiple units can be daisy-chained using the Power OUT port, but ensure the total current draw does not exceed the circuit's capacity.

4.3 Conexión DMX

For DMX control, connect a DMX cable from your DMX controller's output to the DMX IN port of the first fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. Terminate the last fixture in the chain with a DMX terminator (not included) for optimal signal integrity.

Image: A DMX cable connected to the DMX IN port, showing the secure locking mechanism.

Image: Diagram illustrating the connection of the par light to a DMX controller.

5. Modos de funcionamiento

The SHEHDS Zoom Par Light offers several operating modes, selectable via the control panel display.

5.1 Navegación en el panel de control

Use the following buttons to navigate the menu and adjust settings:

• MENÚ: Recorre las opciones del menú principal.
• UP: Increases values or moves up in menu.
• ABAJO: Decreases values or moves down in menu.
• ENTRAR: Confirma la selección o ingresa a un submenú.

5.2 Modo DMX

To operate the fixture with a DMX controller:

1. Prensa MENÚ until "Addr" (Address) appears on the display.
2. Usar ARRIBA/ABAJO to set the desired DMX start address (1-512).
3. Prensa INGRESAR Para confirmar.
4. Ensure your DMX controller is sending signals to the set address.

The fixture supports RDM (Remote Device Management), allowing DMX addresses and other settings to be configured remotely via a compatible DMX controller.

5.3 Modo activado por sonido

For dynamic lighting synchronized with music:

1. Prensa MENÚ until "Soun" (Sound) appears.
2. Prensa INGRESAR to activate. The light will react to ambient sound.
3. Some models may offer sensitivity adjustment via the UP/DOWN buttons.

5.4 Auto-run Mode

To run pre-programmed light shows:

1. Prensa MENÚ until "Auto" appears.
2. Usar ARRIBA/ABAJO to select a specific auto program (e.g., A1, A2, A3).
3. Prensa INGRESAR para iniciar el programa seleccionado.

5.5 Modo Maestro/Esclavo

To synchronize multiple fixtures without a DMX controller:

1. Connect all fixtures via DMX cables (DMX OUT to DMX IN).
2. Set the first fixture (Master) to an Auto-run or Sound Activated mode.
3. Set all subsequent fixtures (Slaves) to "SLAV" (Slave) mode via their control panels.
4. The slave units will now mimic the master unit's behavior.

6. DMX Control Channels

The SHEHDS Zoom Par Light typically uses a multi-channel DMX profile. Below is a common channel assignment. Refer to the specific DMX chart provided with your unit for exact details, as channel functions can vary.

Note: This is a generic DMX channel assignment. Always refer to the specific DMX chart provided with your product for accurate channel functions and values.

Image: Visual representation of the adjustable zoom angle feature, showing a purple light beam expanding.

7. Mantenimiento

• Limpieza: Regularly clean the lenses and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Ventiladores y respiraderos: Ensure cooling fan and ventilation openings are free from dust and debris to prevent overheating. Use compressed air if necessary.
• Inspección de cables: Periodically check power and DMX cables for any damage or wear. Replace damaged cables immediately.
• Almacenamiento: Cuando no esté en uso, guarde el dispositivo en un entorno seco y sin polvo, preferiblemente en su embalaje original o en un estuche protector.

8. Solución de problemas

9. Especificaciones

Image: Product dimensions and weight illustration.

10. Garantía y soporte

SHEHDS se compromete a proporcionar productos de calidad y satisfacción del cliente.

• Servicio al cliente: Instant customer service is available for any inquiries or assistance.
• Política de reemplazo: The product is eligible for a 1-month replacement from the date of purchase for manufacturing defects.
• Garantía: Una garantía de 1 años cubre defectos de materiales y mano de obra.

For support, please refer to the contact information provided with your purchase or visit the official SHEHDS store page.

Image: SHEHDS customer support and warranty information.

11. Vídeo del producto

Watch this video for a demonstration of the SHEHDS Zoom Par Light's features and operation.