Yaheetech Adjustable PU Leather Swivel Barstools

Taburetes de bar giratorios ajustables de cuero sintético Yaheetech (juego de 2) Manual de instrucciones

Model: Adjustable PU Leather Swivel Barstools

Introducción

Thank you for choosing Yaheetech Adjustable PU Leather Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new bar stools. Please read these instructions carefully before use and retain them for future reference.

Información importante de seguridad

ADVERTENCIA: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov/furniture.

  • Asegúrese de que todas las piezas estén presentes y sin daños antes del montaje.
  • Do not use the product if any part is missing, damaged, or worn.
  • Do not stand on the bar stool.
  • No exceda la capacidad máxima de peso de 330 libras (150 kg).
  • Mantenga a los niños alejados del producto durante el montaje.
  • Úselo siempre sobre una superficie plana y estable.

Contenido del paquete

Your Yaheetech Bar Stools package should contain the following components for a set of 2 stools:

  • 2 x Seat Cushions with Backrest (PU Leather)
  • 2 x Gas Lift Cylinders (SGS-certified)
  • 2 x Footrests (Chrome-plated metal)
  • 2 x Base Plates (Electroplated metal with anti-slip rubber ring)
  • Herrajes de montaje (tornillos, llave Allen)
  • Manual de instrucciones

Configuración (Instrucciones de montaje)

Assembly is quick and easy, typically taking less than 10 minutes per chair. Follow these steps:

  1. Desempaquetar componentes: Retire con cuidado todas las piezas del embalaje y colóquelas sobre una superficie limpia y suave para evitar rayones.
  2. Attach Footrest to Gas Lift: Slide the footrest ring onto the gas lift cylinder. Ensure it is securely positioned.
  3. Insertar el elevador de gas en la base: Place the wider end of the gas lift cylinder into the center hole of the base plate. The anti-slip rubber ring on the base should be facing down.
  4. Conecte el asiento al elevador de gas: Align the mounting plate on the underside of the seat cushion with the top of the gas lift cylinder. Secure the seat to the gas lift using the provided screws and Allen wrench. Ensure all screws are tightened firmly.
  5. Repetir para el segundo taburete: Follow steps 1-4 to assemble the second bar stool.
Two assembled red Yaheetech bar stools next to a small round table.
Image: Two fully assembled Yaheetech bar stools in red, showcasing their modern design and chrome bases.
Two red Yaheetech bar stools positioned at a kitchen counter.
Image: Yaheetech bar stools in a kitchen setting, demonstrating their suitability for counter height use.

Instrucciones de funcionamiento

  • Ajuste de altura: To adjust the seat height, locate the lever under the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. The gas lift system allows for smooth height adjustments.
  • Función giratoria: The bar stools feature a 360-degree swivel function, allowing for easy rotation without moving the base.
  • Reposapiés: Utilize the built-in footrest for added comfort and support while seated.
Close-up of the Yaheetech bar stool's gas lift, wide metal base with rubber ring, and built-in footrest.
Imagen: Detallada view of the secure gas lift mechanism, the wide 16-inch diameter metal base with its anti-slip rubber ring, and the integrated footrest, highlighting key functional components.

Mantenimiento

  • Limpieza: Wipe the PU leather and metal surfaces with a damp Paño. Evite utilizar productos químicos agresivos o limpiadores abrasivos, que pueden dañar el acabado.
  • Controles periódicos: Revise periódicamente todos los tornillos y conexiones para asegurarse de que estén bien apretados. Vuelva a apretarlos si es necesario.
  • Protección del suelo: The base includes an anti-slip rubber ring to protect your floors. Ensure this ring is clean and intact.
Three images showing the high-density foam seat, water-resistant surface, and chic biscuit tufting of the Yaheetech bar stool.
Imagen: Primer plano views illustrating the high-density foam seat for comfort, the water-resistant PU leather surface, and the stylish biscuit tufting design.

Solución de problemas

  • El taburete se tambalea: Check that all assembly screws are securely tightened. Ensure the base is on a flat, even surface.
  • El ajuste de altura no funciona: Verify that the gas lift lever is functioning correctly and not obstructed. Ensure the gas lift cylinder is properly seated in both the base and the seat mechanism.
  • Ruido chirriante: Apply a small amount of silicone lubricant to moving parts, such as the swivel mechanism or gas lift, if squeaking occurs.

Presupuesto

Dimensiones del producto19.5" de profundidad x 17" de ancho x 36.5" de alto
ColorRojo
MarcaYaheetech
TamañoJuego de 2
EstiloModerno
Altura del asientoAdjustable from 21.7 Inches
Ancho del asiento17 pulgadas
Recomendación de peso máximo330 libras (150 kg)
Material del marcoMetal
Tipo de material del asientoCuero sintético (cuero PU)
Requiere ensamblaje
Peso del artículo (por taburete)Approximately 15.75 pounds (31.5 pounds for set of 2)
Diagram showing detailed dimensions of the Yaheetech bar stool, including height, width, and depth.
Image: Technical drawing with key dimensions of the bar stool, including seat height range (25-33.3 inches), seat width (17 inches), and overall height (36.5-44.5 inches).

Información de garantía

Yaheetech products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included in your package or contact Yaheetech customer support.

Atención al cliente

If you have any questions, concerns, or require assistance with your Yaheetech bar stools, please contact our customer support team. Contact information can typically be found on our official websitio o en el embalaje del producto.

Documentos relacionados - Adjustable PU Leather Swivel Barstools

Preview Guía de instalación de la silla ergonómica para juegos Yaheetech
Instrucciones paso a paso y lista de piezas para ensamblar tu silla ergonómica para juegos Yaheetech, con soporte lumbar masajeador y reposapiés ajustable. Asegúrate de que esté bien instalada para una comodidad y un rendimiento óptimos.
Preview Instrucciones de montaje del sillón reclinable de piel sintética Mcghee de Yaheetech
Instrucciones de montaje paso a paso y normas de seguridad para el sillón reclinable de piel sintética Mcghee de Yaheetech. Aprenda a montar su nuevo mueble de forma rápida y segura.
Preview Instrucciones de montaje del sillón reclinable de piel sintética Mcghee de Yaheetech
Instrucciones detalladas de montaje y normas de seguridad para el sillón reclinable de piel sintética Mcghee de Yaheetech. Aprenda a montar su nuevo sillón reclinable de forma rápida y segura.
Preview Mesa de dibujo ajustable Yaheetech 611055 con taburete - Manual de montaje
Instrucciones completas de montaje para la mesa de dibujo ajustable Yaheetech 611055 con taburete. Incluye lista de piezas, guía paso a paso e información importante de seguridad.
Preview Instrucciones de montaje de la isla de cocina Yaheetech 614123
Instrucciones de montaje detalladas para la isla de cocina Yaheetech 614123, un carrito de almacenamiento con ruedas, tablero extensible y múltiples opciones de almacenamiento.
Preview Yaheetech 592946 Swivel Accent Chair Assembly Instructions
Step-by-step assembly guide for the Yaheetech 592946 Swivel Accent Chair, including parts list, assembly steps, care instructions, and contact information.