Introducción
This manual provides essential instructions for the proper use, setup, and maintenance of your FORSINING WD19 Men's Mechanical Hand-Wind Skeleton Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.
Producto terminadoview
The FORSINING WD19 is a mechanical hand-wind skeleton watch featuring a stainless steel mesh bracelet. Its design showcases the intricate internal movement through a transparent dial and case back.
Figura 1: Frente view of the FORSINING WD19 Skeleton Watch, showcasing the visible mechanical movement and mesh bracelet.
Figura 2: Trasero view of the watch, highlighting the stainless steel case back and the clasp mechanism of the mesh bracelet.
Figura 3: Lado view illustrating the watch's profile and the visible mechanical gears through the transparent case.
Figura 4: Close-up of the fold-over clasp with safety on the stainless steel mesh bracelet.
Configuración
1. Dar cuerda al reloj
Your FORSINING WD19 is a mechanical hand-wind watch. It does not use a battery and requires manual winding to operate.
- Localice la corona en el lateral de la caja del reloj.
- Ensure the crown is pushed fully in towards the watch case.
- Rotate the crown clockwise approximately 18-20 times. This will fully wind the mainspring and provide approximately 36 hours of power reserve.
- For daily use, it is recommended to wind the watch once every 24 hours to maintain consistent timekeeping.
Vídeo 1: Demonstration of how to wind a mechanical watch and set the time. This video shows the crown being rotated clockwise to wind the watch and pulled out to adjust the time.
2. Configuración de la hora
- Gently pull the crown out one position.
- Gire la corona para mover las manecillas en sentido horario o antihorario hasta establecer la hora deseada.
- Once the time is set, push the crown back in firmly to its original position to engage the movement and prevent dust or moisture from entering.
3. Ajuste de la pulsera de malla
The stainless steel mesh bracelet features a fold-over clasp with safety, which can be adjusted for a comfortable fit.
- Locate the small lever on the clasp.
- Use a small tool (like a flat-head screwdriver or a spring bar tool) to lift the lever, which will allow the clasp to slide along the mesh band.
- Adjust the clasp to the desired position for your wrist size.
- Press the lever back down firmly to secure the clasp in place. Ensure it clicks securely to prevent accidental opening.
Operación del reloj
After winding and setting the time, your watch will begin to operate. The skeleton design allows you to observe the intricate gears and springs in motion.
Nota: Mechanical watches may have a slight deviation in timekeeping compared to quartz watches. Regular winding and proper care will help maintain accuracy.
Mantenimiento
- Limpieza: Wipe the watch case and crystal with a soft, dry cloth. For the mesh bracelet, a slightly damp cloth can be used, ensuring it is dried thoroughly afterward. Avoid harsh chemicals.
- Resistencia al agua: The watch has a water-resistant structure. However, it is No apto para nadar, bucear o ducharse.. Avoid direct contact with water to prevent damage to the mechanical movement.
- Almacenamiento: When not wearing the watch for extended periods, store it in a dry, cool place away from direct sunlight and strong magnetic fields, which can affect timekeeping accuracy.
- Evite los choques: Los relojes mecánicos son delicados. Evite dejarlos caer o someterlos a golpes fuertes.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El reloj se detiene o funciona de forma intermitente | Bobinado insuficiente | Manually wind the watch fully (18-20 clockwise rotations of the crown). |
| El tiempo es inexacto (corre rápido o lento) | Magnetic interference, shock, or need for regulation | Keep the watch away from strong magnetic fields. If inaccuracy persists, professional servicing may be required. |
| Condensación bajo el cristal | Entrada de humedad | Avoid contact with water. If condensation appears, seek professional repair immediately to prevent corrosion. |
Presupuesto
- Número de modelo: WD19
- Movimiento: Mechanical Hand-Wind, 17-Jewels
- Material de la caja: Aleación
- Material de la banda: Malla de acero inoxidable
- Tipo de cierre: Cierre plegable con seguridad
- Cristal: Cristal mineral protector
- Resistencia al agua: Water-resistant (not for swimming/diving/showering)
- Reserva de energía: Aproximadamente 36 horas (cuando está completamente cargado)
Garantía y soporte
This FORSINING watch comes with a Garantía de dos años from the manufacturer, covering manufacturing defects.
For warranty claims or technical support, please contact the seller, Forsining Watch, or refer to the contact information provided with your purchase.
Importante: Any unauthorized repair or modification may void your warranty.
Recursos adicionales
Vídeo 2: Un general sobreview of a SEWOR mechanical skeleton watch, demonstrating its aesthetic and movement. This video provides a visual representation of a similar watch type.
