1. Introducción
The Waveshare SIM7600G-H 4G HAT Module is designed to provide LTE Cat-4 4G, 3G, and 2G communication capabilities, along with GNSS positioning, for Raspberry Pi boards and PCs. This module is based on the SIM7600G-H chip, offering global band support for versatile connectivity. It integrates a USB HUB feature, allowing for extended USB connectivity.
Las características principales incluyen:
- Global band 4G/3G/2G network compatibility.
- Integrated USB HUB with two USB-A connectors and one USB solder pad.
- Admite posicionamiento de estaciones base GPS, BeiDou, Glonass y LBS.
- Capable of telephoto calls and SMS via AT commands, with an onboard audio jack.
- Dedicated pogo pins for Raspberry Pi Zero/Zero W and a MicroUSB connector for other Raspberry Pi boards or PCs.
- Two LED indicators for monitoring operational status.
Figure 1: SIM7600G-H 4G HAT Module and included components.
2. Contenido del paquete
Verifique que todos los artículos enumerados a continuación estén incluidos en su paquete:
- SIM7600G-H 4G HAT (B) x1
- Antena LTE x1
- Antena GPS x1
- USB-A to micro-B cable x1
- Paquete de tornillos x1
Nota: Raspberry Pi boards and expansion modules are not included and must be acquired separately.
3. Configuración e instalación
The SIM7600G-H 4G HAT Module offers flexible connection options for various host devices.
3.1 Connecting to Raspberry Pi Zero/Zero W
For Raspberry Pi Zero and Zero W models, the module can be directly connected using its dedicated pogo pins. This method eliminates the need for an additional USB cable for data communication. Ensure proper alignment of the pogo pins with the Raspberry Pi's GPIO header.
- Align the module's pogo pins with the corresponding pins on the Raspberry Pi Zero/Zero W.
- Gently press the module onto the Raspberry Pi until the pogo pins make secure contact.
- Secure the module using the provided screws and standoffs if necessary.
- Ensure the 5V pogo pin connects to the 5V pin of the Zero/Zero W, and the GND pogo pin connects to the GND pin. This provides power to the module.
Figure 2: Connection of the SIM7600G-H module to a Raspberry Pi Zero using pogo pins.
3.2 Connecting to Other Raspberry Pi Boards or PC
For other Raspberry Pi models (e.g., Raspberry Pi 3B/4B) or a PC, use the provided MicroUSB cable to connect the module.
- Connect one end of the USB-A to micro-B cable to the MicroUSB port on the SIM7600G-H module.
- Connect the other end (USB-A) to an available USB port on your Raspberry Pi or PC.
- Ensure the host device provides sufficient power to the module.
Figure 3: Connection of the SIM7600G-H module to a Raspberry Pi via USB.
3.3 Instalación de la antena
Proper antenna connection is crucial for optimal performance.
- Connect the LTE Antenna to the PRINCIPAL antenna connector on the module.
- Connect the GPS Antenna to the GNSS antenna connector on the module.
- Ensure the antenna connectors are securely fastened. Loose connections can lead to poor signal reception.
Importante: The small antenna connectors require careful handling. Ensure they are firmly attached to prevent disconnections. If experiencing issues, consider securing them with a non-conductive adhesive after connection.
3.4 Inserción de la tarjeta SIM
Insert a 1.8V or 3V SIM card into the designated SIM card slot on the module. Ensure the SIM card is correctly oriented as indicated on the module.
4. Instrucciones de funcionamiento
The SIM7600G-H module is primarily controlled via AT commands. Detailed documentation and examples for Raspberry Pi are typically provided by the manufacturer.
4.1 Initializing Communication
- After connecting the module to your Raspberry Pi or PC, the operating system should detect the device.
- On Linux systems (like Raspberry Pi OS), the module typically enumerates as a serial port (e.g.,
/dev/ttyUSB0,/dev/ttyUSB1, etc.). - Use a serial terminal program (e.g., Minicom, CuteCom) to send AT commands to the module.
- Ensure hardware flow control is disabled on your controller board if you encounter communication issues.
4.2 Network Connectivity (4G/3G/2G)
The module supports LTE Cat-4 4G, 3G, and 2G networks globally, with uplink speeds up to 50Mbps and downlink speeds up to 150Mbps on 4G.
- Use AT commands to configure network settings, connect to the cellular network, and establish data connections (e.g., dial-up, TCP, UDP, HTTP, FTP).
- Refer to the SIM7600G-H AT Command Manual for specific commands related to network registration and data services.
Figura 4: Example of network performance and USB HUB functionality.
4.3 Posicionamiento GNSS
The module supports multiple Global Navigation Satellite Systems (GNSS), including GPS, BeiDou, Glonass, as well as LBS (Location Based Service) base station positioning.
- Ensure the GPS antenna is connected and placed in an area with a clear view del cielo para una recepción óptima de la señal.
- Use specific AT commands to enable GNSS, query position data, and configure GNSS settings.
Figure 5: GNSS positioning in action, displaying location data on a map.
4.4 Telephoto Call and SMS
The module allows for making telephoto calls and sending/receiving SMS messages using AT commands. It features an onboard audio jack for connecting a headset.
- Connect a headset to the 3.5mm audio jack for audio input/output during calls.
- Refer to the AT Command Manual for commands related to call initiation, answering, termination, and SMS sending/receiving.
Figure 6: Illustration of telephoto call and SMS functionality via AT commands.
4.5 USB HUB Feature
The integrated USB HUB chip (FE1.1S) provides additional USB 2.0/1.1 compliant ports.
- Two USB-A connectors are available for connecting external USB devices.
- An additional USB solder pad is provided for custom integrations.
5. Aplicación Example: 4G/3G Wireless Router
The SIM7600G-H module can be combined with a Raspberry Pi running operating systems like Raspbian or OpenWrt to create a 4G/3G wireless router. This setup allows the Raspberry Pi to act as a Wi-Fi hotspot, enabling other devices to access the mobile cellular network.
- Install the necessary software and drivers on your Raspberry Pi.
- Configure the Raspberry Pi to share the cellular internet connection via its Wi-Fi interface.
- Detailed configuration steps are typically available in the manufacturer's development resources.
Figure 7: The SIM7600G-H module configured as a 4G/3G wireless router.
6. Producto terminadoview
6.1 Dimensiones del esquema
The physical dimensions of the SIM7600G-H 4G HAT Module are provided below (all units in millimeters).
Figure 8: Outline dimensions of the SIM7600G-H 4G HAT Module.
6.2 Qué hay a bordo
This section details the main components and interfaces present on the SIM7600G-H 4G HAT Module.
Figure 9: Component layout and identification on the SIM7600G-H 4G HAT Module.
- SIM7600G-H module
- FE1.1S USB HUB chip
- NAU8810 audio decoder
- MP1482 power chip
- RT9193-33 voltagtraductor
- USB HUB input (D+/D- pogo pin for Raspberry Pi Zero/Zero W; MicroUSB connector for other Raspberry Pi boards or PC)
- Pogo pin power supply (5V: connects to 5V pin of Zero/Zero W, up to 2A current; GND: connects to GND pin of Zero/Zero W)
- USB extended ports (USB1-USB2: USB-A connectors; USB3: solder pad)
- SIM card slot (supports 1.8V/3V SIM card)
- 3.5mm earphone/mic jack
- MAIN antenna connector
- AUX auxiliary antenna connector
- Conector de antena GNSS
- Indicador de encendido
- Indicador de estado de la red
7. Especificaciones
Detailed technical specifications for the SIM7600G-H 4G HAT Module are provided in the table below.
| Característica | Detalle |
|---|---|
| Nombre del modelo | SIM7600G-H |
| Tecnología de conectividad | USB |
| Soporte de red | LTE Cat-4 (4G), 3G, 2G (Global Band) |
| Uplink Speed (4G) | Hasta 50 Mbps |
| Downlink Speed (4G) | Hasta 150 Mbps |
| Soporte GNSS | GPS, BeiDou, Glonass, LBS base station positioning |
| Ranura para tarjeta SIM | Supports 1.8V/3V SIM card |
| Funciones de audio | Onboard audio jack, audio decoder for calls |
| Interfaz de control | AT commands (3GPP TS 27.007, 27.005, V.25TER) |
| USB HUB Chip | FE1.1S (USB2.0/1.1 compliant) |
| Puertos USB | 2x USB-A, 1x USB solder pad |
| Indicadores LED | 2 (Power, Network Status) |
| Dimensiones | 65.00 x 31.00 mm (aprox. 2.56 x 1.22 pulgadas) |
| Temperatura de funcionamiento | -30°C a 80°C |
| Temperatura de almacenamiento | -45°C a 90°C |
| Fuente de alimentación | 5V |
8. Solución de problemas
This section provides solutions to common issues encountered during the use of the SIM7600G-H 4G HAT Module.
- Module not detected by Raspberry Pi/PC:
- Ensure the module is properly powered. Check the power indicator LED.
- If using pogo pins, verify secure contact and correct 5V/GND connections.
- Si usa USB, pruebe con un puerto o cable USB diferente.
- On Raspberry Pi, ensure the necessary drivers are installed and the kernel recognizes USB serial devices.
- Sin conexión de red:
- Verifique que la tarjeta SIM esté correctamente insertada y activa con un plan de datos válido.
- Ensure the LTE antenna is securely connected to the MAIN port.
- Check the network status indicator LED for activity.
- Confirm that the correct APN settings are configured via AT commands.
- Test the module in an area with good cellular coverage.
- GNSS positioning not working:
- Ensure the GPS antenna is securely connected to the GNSS port.
- Place the GPS antenna in an open area with a clear view del cielo.
- Verify GNSS is enabled and configured correctly via AT commands.
- Communication issues with AT commands (e.g., no response, garbled text):
- Check the serial port settings (baud rate, data bits, parity, stop bits) in your terminal program.
- Crucially, ensure hardware flow control is disabled on your host controller board or in your serial communication software. This is a common cause of issues.
- Verify the correct serial port device is selected (e.g.,
/dev/ttyUSBn).
- Antenna connectors frequently detach:
- These are small connectors and can be delicate. Ensure they are fully seated.
- For permanent installations, a small amount of non-conductive adhesive (e.g., hot glue) can be used to secure the connectors after they are properly attached.
9. Soporte y garantía
For technical support, additional development resources, or warranty inquiries, please contact Waveshare directly through their official website or the platform where the product was purchased. Development resources and manuals with examples for Raspberry Pi are typically provided by the manufacturer.
Fabricante: Compartir ondas
Websitio: www.waveshare.com
