1. Introducción
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Lumi LPA36-463A Full-Motion TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This wall mount is designed to securely hold most LED and LCD televisions ranging from 37 to 70 inches, with a maximum weight capacity of 45 kg (99 lbs).
The full-motion design allows for maximum extension, tilt, and rotation of your television, providing optimal viewing angles from various positions within a room. The mount can extend up to 475 mm from the wall and retract to a slim profile de 95 mm.
Image 1.1: The Lumi LPA36-463A Full-Motion TV Wall Mount, showing its articulated arm and VESA plate.
2. Información de seguridad
ADVERTENCIA: No leer ni seguir estas instrucciones podría provocar lesiones personales graves, daños materiales o la anulación de la garantía. Si no comprende estas instrucciones o tiene dudas sobre la seguridad de la instalación, póngase en contacto con un instalador cualificado.
- No exceda la capacidad máxima de peso de 45 kg (99 lbs).
- This mount is designed for installation on solid concrete walls, brick walls, or wood stud walls. Do not install on drywall alone.
- Asegúrese de que la estructura de la pared pueda soportar de forma segura el peso combinado del soporte y el televisor.
- Use only the mounting hardware provided. Do not use power tools to tighten screws, as this may strip threads.
- Mantenga todas las piezas pequeñas fuera del alcance de los niños.
- Para evitar lesiones o daños, siempre deben realizar la instalación al menos dos personas.
- Revise periódicamente todas las conexiones para asegurarse de que permanezcan seguras.
3. Contenido del paquete
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact your retailer for assistance.
| Parte | Descripción | Cantidad |
|---|---|---|
| Conjunto de placa de pared | Main wall mounting bracket with articulated arm. | 1 |
| Soporte de TV (placa VESA) | Bracket that attaches to the back of the TV. | 1 |
| Kit de hardware de montaje | Includes various screws, washers, and anchors for wall and TV attachment. | 1 juego |
| Nivel | For ensuring horizontal alignment during installation. | 1 |
| Manual de instrucciones | Este documento. | 1 |
4. Configuración e instalación
Before you begin, ensure you have the necessary tools: pencil, drill, stud finder (for wood studs), measuring tape, and a Phillips head screwdriver. It is highly recommended to have two people for installation.
4.1. Determine la ubicación de montaje
- Choose a location on the wall that can support the weight of the TV and mount.
- For wood stud walls, locate the center of the studs using a stud finder.
- For concrete or brick walls, ensure there are no hidden pipes or electrical wires.
- Mark the desired height for the top of your TV.
4.2. Fije la placa de pared a la pared
- Position the wall plate assembly against the wall at the desired height. Use the integrated level to ensure it is perfectly horizontal.
- Mark the drill holes through the wall plate onto the wall with a pencil.
- Taladre agujeros piloto:
- For wood studs: Use a 5.5mm (7/32") drill bit.
- For concrete/brick: Use a 10mm (3/8") masonry drill bit and insert wall anchors.
- Fije la placa de pared a la pared con los tirafondos y las arandelas incluidos. Apriétela firmemente, pero sin apretarla demasiado.
4.3. Fije los soportes de TV al televisor
- Coloque con cuidado el televisor boca abajo sobre una superficie suave y limpia.
- Identify the VESA mounting holes on the back of your TV. This mount supports VESA patterns up to 400x400 mm.
- Select the appropriate screws (M4, M6, or M8) and washers from the hardware kit that fit your TV's mounting holes.
- Attach the TV brackets to the back of your TV, ensuring they are centered and securely fastened. Do not overtighten.
4.4. Mount TV to Wall Plate
- With assistance, carefully lift the TV and hook the TV brackets onto the wall plate assembly.
- Asegúrese de que el televisor esté colocado de forma segura en la placa de pared.
- Engage any safety locking mechanisms (if present) to prevent accidental dislodgement.
5. Instrucciones de funcionamiento
The Lumi LPA36-463A mount offers full-motion capabilities for optimal viewflexibilidad.
5.1. Adjusting Extension and Retraction
- Gently pull the TV away from the wall to extend the arm. The mount can extend up to 475 mm.
- Push the TV back towards the wall to retract the arm. The mount can retract to a minimum distance of 95 mm from the wall.
- Always move the TV smoothly and avoid sudden jerks.
5.2. Ajuste de la inclinación
- The mount allows for vertical tilt adjustment. Loosen the tilt adjustment knobs (if present, refer to diagram in physical manual) on the TV brackets.
- Adjust the TV to the desired upward or downward angle.
- Tighten the tilt adjustment knobs to secure the TV in position.
5.3. Adjusting Swivel (Rotation)
- The articulated arm allows for horizontal swivel of the TV up to 90 degrees left and right.
- Gently push or pull the side of the TV to rotate it to your preferred viewángulo de ing.
- No locking mechanism is typically required for swivel; the friction of the joints holds the position.
6. Mantenimiento
El mantenimiento regular garantiza la longevidad y el funcionamiento seguro de su soporte de pared para TV.
- Limpieza: Limpie el soporte con un paño suave y seco. No utilice limpiadores abrasivos ni disolventes.
- Inspección periódica: Every 3-6 months, check all screws and bolts to ensure they are tight and secure. Retighten if necessary.
- Lubricación de juntas: If the arm movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points. Avoid oil-based lubricants.
- Verificación de daños: Inspect the mount for any signs of damage, wear, or corrosion. If any damage is found, discontinue use and contact customer support.
7. Solución de problemas
If you encounter issues with your Lumi LPA36-463A TV mount, refer to the following common problems and solutions.
| Problema | Posible causa | Solución |
|---|---|---|
| El televisor no está nivelado después de la instalación. | Wall plate not perfectly horizontal. | Carefully loosen wall plate bolts, adjust with a level, and retighten. Some mounts have post-installation leveling adjustments; check your specific model. |
| El soporte se siente flojo o inestable. | Mounting bolts are not tight enough or incorrect wall anchors were used. | Ensure all wall bolts and TV attachment screws are securely tightened. Verify correct anchors for your wall type. If problem persists, consult a professional. |
| TV cannot tilt or swivel smoothly. | Las juntas están demasiado apretadas o requieren lubricación. | Check if any adjustment knobs are overtightened. Apply a small amount of silicone-based lubricant to the moving joints. |
| El televisor no encaja en el soporte. | Patrón VESA o tamaño/peso del televisor incorrectos. | Verify your TV's VESA pattern and weight against the mount's specifications. This mount supports VESA up to 400x400mm and TVs up to 45kg (99lbs). |
8. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | LPA36-463A |
| Marca | Luz |
| Tipo de montaje | Soporte de pared de movimiento completo |
| Material | Metal |
| Compatibilidad de tamaño de pantalla | 37" - 70" |
| Capacidad de peso | 45 kg (99 libras) |
| Compatibilidad VESA | Hasta 400x400 mm |
| Extensión desde la pared | 95 mm (retraído) a 475 mm (extendido) |
| Rango de inclinación | Adjustable (vertical) |
| Rango giratorio | Hasta 90 grados a la izquierda/derecha |
| Dimensiones de envío | 51.4 x 22.2 x 7 cm; 2.52 kg |
9. Garantía y soporte
Lumi products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official Lumi webSitio. Conserve su recibo de compra como comprobante de compra.
For technical support, missing parts, or any questions regarding the installation or operation of your Lumi LPA36-463A TV Wall Mount, please contact your local retailer or Lumi customer service.
Información del contacto: (Please refer to your product packaging or Lumi's official web(Sitio para obtener los datos de contacto más actualizados).
