mophie Powerstation Go Rugged AC - Instruction Manual

Encimaview

The mophie Powerstation Go Rugged AC is a versatile portable power solution designed to keep your devices charged and your vehicle running. Equipped with a 55.5 mWh internal battery, it features two USB-A ports and a 65W AC port for charging various electronics, from smartphones and tablets to laptops and small appliances. Beyond personal devices, it functions as a portable car jump starter for full-sized vehicles like cars, trucks, and boats, including shock-proof jumper cables for safe operation. An integrated LED floodlight and intuitive LCD display enhance its utility in emergency situations. Its rugged design and compact size make it an ideal companion for travel, outdoor adventures, or everyday emergencies.

¿Qué hay en la caja?

• powerstation - mophie jump starter
• Enchufe de pared de CA
• Cables de puente
• Charging Cable (USB-C Cable)
• Bolsa de transporte
• Guía de inicio rápido

Características del producto

55.5 mWh Internal Battery

Equipped with a robust 55.5 mWh internal battery, providing ample power for various needs.

65W AC Power Port

Features a 65W AC port to power laptops, tablets, and other small electrical appliances.

Puertos USB-A duales

Two USB-A ports allow simultaneous charging of smartphones, tablets, and other USB-enabled devices.

Arrancador portátil para coche

Capable of jump-starting full-sized vehicles like cars, trucks, and boats with included mini jumper cables.

Pantalla LCD intuitiva

Easy-to-read display shows battery level, voltage, and safety checks.

Proyector LED brillante

Built-in LED floodlight for illumination in low-light conditions or emergencies.

Instrucciones de instalación

Carga inicial

1. Connect the included AC wall plug to the powerstation's charging port.
2. Plug the AC wall plug into a standard wall outlet.
3. Allow the powerstation to charge completely until the LCD display shows 100%.

Conexión de cables puente

1. Locate the jump start port on the powerstation.
2. Plug the mini jumper cables into the jump start port. Ensure a secure connection. The cables are designed to fit only one way to prevent incorrect polarity.

Instrucciones de funcionamiento

Charging Devices via USB-A Ports

1. Connect your device's USB charging cable to one of the two USB-A output ports on the powerstation.
2. The powerstation will automatically begin charging your device. Monitor the device's charging status.

Powering Devices via 65W AC Port

1. Open the protective cover for the 65W AC output port.
2. Plug your device's AC power adapter into the AC port.
3. Press the AC power button to activate the AC output. The LCD display will indicate AC power is active.
4. Ensure your device is compatible with 65W AC power.

Arrancar un vehículo

1. Ensure the powerstation is fully charged.
2. Connect the mini jumper cables to the powerstation's jump start port.
3. Conecte el cl rojo (positivo)amp al terminal positivo de la batería del vehículo.
4. Conecte el cl negro (negativo)amp to the vehicle's negative battery terminal or a grounded part of the vehicle chassis.
5. Press the jump start button on the powerstation. Wait for the indicator light to turn solid green.
6. Start your vehicle. Once started, immediately disconnect the jumper cables from the vehicle battery, then from the powerstation.

Using the LED Floodlight

1. Press the floodlight button to turn on the LED light.
2. Press the button again to cycle through different light modes (e.g., bright white, red, flashing red).
3. Press and hold the button to turn off the floodlight.

Using the Air Compressor (for models with this feature)

The mophie Powerstation Go Rugged AC may include an integrated air compressor for inflating tires or other inflatables. Refer to the quick-start guide for specific instructions on connecting the air hose and setting desired pressure.

Mantenimiento

• Keep the powerstation clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Store the powerstation in a cool, dry place away from direct sunlight and extreme temperatures.
• For optimal battery life, fully charge the powerstation every 3 months, even if not in use.
• No intente desmontar ni reparar el dispositivo usted mismo. Póngase en contacto con el servicio de atención al cliente para obtener ayuda.

Solución de problemas

El dispositivo no se carga

• Ensure the charging cable is securely connected to both the powerstation and the power source.
• Verifique que el tomacorriente de pared funcione.
• Check if the powerstation itself has sufficient charge.

Vehicle Not Jump Starting

• Confirm the jumper cables are correctly connected to the vehicle battery terminals (red to positive, black to negative).
• Ensure the powerstation has adequate charge for jump starting.
• Check for any error messages on the LCD display and consult the quick-start guide for their meaning.

Presupuesto

Garantía y soporte

mophie products are designed for reliability and performance. For detailed warranty information, product registration, or technical support, please visit the official mophie website or refer to the warranty card included in your product packaging. You can also contact mophie customer service directly for assistance with any issues or questions.