Introducción
This manual provides essential information for the safe and effective use of the Sealey WCR02 Motorcycle Roll-in Wheel Clamp. Please read these instructions carefully before setup, operation, or maintenance.
The Sealey WCR02 is designed to increase the stability of a motorcycle by securely clamping its front wheel. It features a pivot clamp that locks the wheel using the motorcycle's weight, making it suitable for use on trailers, in vans, or on motorcycle lifts.
Información de seguridad
- Asegúrese siempre de que el clamp is securely bolted down to a stable surface before use.
- Motorcycle must also be secured using additional tie-down straps. The clamp provides stability but is not the sole securing method.
- Ensure the wheel clamp is adjusted correctly for the specific wheel size and tyre width of your motorcycle.
- Do not exceed the maximum recommended tyre width of 130mm.
- Keep hands and feet clear of moving parts during motorcycle loading and unloading.
Configuración e instalación
The Sealey WCR02 wheel clamp requires secure bolt-down installation. Fittings are not included and must be sourced separately based on your mounting surface.
- Elija una ubicación: Select a stable and level surface for installation, such as a trailer bed, van floor, or motorcycle lift. Ensure there is sufficient space around the clamp for safe operation and motorcycle maneuvering.
- Coloque el Clamp: Place the wheel clamp in the desired position. The clamp is designed to be bolted down.
- Puntos de perforación de marcado: Use the pre-drilled holes on the clamp's base as a template to mark the drilling points on your mounting surface.
- Perforar agujeros: Drill holes of appropriate size for your chosen bolts and fixings.
- Asegure el Clamp: Bolt the wheel clamp firmly to the surface using suitable high-strength fasteners (not supplied). Ensure all bolts are tightened securely to prevent any movement of the clamp Durante el uso.
- Adjust for Wheel Size: El CLamp is adjustable to fit wheels from Ø15" to 21" (380-535mm) and tyre widths from 50-130mm. Adjust the movable front section by removing the pin, sliding it to the appropriate position for your motorcycle's wheel, and reinserting the pin.
Image: The Sealey WCR02 Motorcycle Roll-in Wheel Clamp, showing its L-shaped design and adjustable front section.
Image: Close-up of hands using a wrench to tighten a bolt on the base of the Sealey WCR02 clamp, demonstrating the bolt-down installation process.
Instrucciones de funcionamiento
- Prepare la motocicleta: Ensure the motorcycle is in neutral and the engine is off.
- Roll into Clamp: Carefully roll the motorcycle's front wheel into the clamp. The pivot clamp will engage and lock the front wheel securely as the motorcycle's weight pushes it forward.
- Verificar el compromiso: Ensure the wheel is fully seated and the pivot clamp has securely locked around the tyre. The motorcycle should feel stable.
- Apply Tie-Down Straps: IMPORTANTE: La rueda clamp provides stability, but it is crucial to secure the motorcycle further using appropriate tie-down straps. Attach straps to secure points on the motorcycle and the mounting surface, ensuring the motorcycle cannot tip or move during transport or storage.
- To Remove Motorcycle: Release the tie-down straps. Carefully roll the motorcycle backward out of the clamp. The pivot mechanism will disengage as the weight is removed.
Image: A motorcycle's front wheel is shown securely positioned within the Sealey WCR02 clamp on a trailer bed, illustrating the clamp's function in stabilizing the bike.
Image: A motorcycle is shown with its front wheel in the Sealey WCR02 clamp, which is mounted on a motorcycle lift. Tie-down straps are visible, emphasizing the need for additional securing.
Mantenimiento
- Inspección regular: Periodically inspect the wheel clamp for any signs of wear, damage, or corrosion. Check all bolted connections for tightness.
- Limpieza: Mantenga el clamp clean and free from dirt, debris, and moisture. Wipe down with a damp Paño si es necesario.
- Lubricación: Lightly lubricate the pivot points and adjustable mechanisms with a suitable grease or oil to ensure smooth operation.
- Almacenamiento: Cuando no esté en uso, guarde el clamp in a dry environment to prevent rust and prolong its lifespan.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Wheel does not lock securely. | Incorrect adjustment for wheel size; insufficient motorcycle weight; clamp not securely bolted. | Ajustar el clamp to the correct wheel diameter. Ensure the motorcycle is fully rolled in. Verify the clamp is firmly bolted to the surface. |
| Clamp se siente inestable | Loose mounting bolts; unstable mounting surface. | Check and tighten all mounting bolts. Ensure the surface it's mounted on is rigid and stable. |
| Difficulty rolling wheel in/out. | Lack of lubrication on pivot points; debris in mechanism; incorrect adjustment. | Clean any debris from the mechanism. Apply lubricant to pivot points. Re-check wheel size adjustment. |
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | WCR02 |
| Fabricante | Sealey |
| Adjustable Wheel Diameter | Ø15" - 21" (380-535mm) |
| Minimum Tyre Width | 50 mm |
| Ancho máximo del neumático | 130 mm |
| Peso del artículo | 19.47 libras |
| Dimensiones del producto | 7.87 x 24.8 x 61.02 pulgadas |
| Componentes incluidos | Motorcycle Roll-in Wheel Clamp - Bolt Down |
Garantía y soporte
For warranty information and technical support, please refer to the official Sealey webSitio web o contacte directamente con el servicio de atención al cliente. Conserve su recibo de compra como comprobante.
Oficial de Sealey Websitio: www.sealey.co.uk
