Introducción
The Kerbl SonicFlash 299906 is an advanced ultrasonic animal repellent designed to deter various animal species from your property. It utilizes intelligent ultrasonic technology, a PIR infrared motion sensor, a solar panel for power, and a flash light to effectively keep unwanted animals away. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device.
Instrucciones de seguridad importantes
- Lea atentamente todas las instrucciones antes de utilizar el dispositivo.
- Mantenga el dispositivo fuera del alcance de los niños.
- No sumerja el dispositivo en agua ni en otros líquidos.
- Do not attempt to open or modify the device. This will void the warranty.
- Asegúrese de que el panel solar esté limpio y expuesto a la luz solar directa para una carga óptima.
- Deshazte de las baterías de acuerdo a las regulaciones locales.
Producto terminadoview
Familiarize yourself with the components of your Kerbl SonicFlash 299906.
Figura 1: Frente view of the Kerbl SonicFlash 299906. This image highlights the solar panel at the top, the flash light bar, the central PIR motion sensor, the large circular ultrasonic speaker, and two control knobs for sensitivity and frequency.
- Panel solar: Carga la batería interna utilizando la luz solar.
- Linterna: Emits bright flashes to deter animals, especially at night.
- PIR Sensor de movimiento: Detects movement and body heat of animals within its range.
- Altavoz ultrasónico: Emits high-frequency sounds inaudible to humans but irritating to animals.
- Perilla de sensibilidad: Adjusts the detection range of the PIR sensor.
- Perilla de frecuencia: Selects different ultrasonic frequencies to target various animal species.
- Mounting Pole/Stake: Para instalación en suelo.
- Compartimento de la batería: Located at the back of the device.
Figura 2: Atrás view of the Kerbl SonicFlash 299906. This image shows the rear panel with screw holes for wall mounting and a removable cover for the battery compartment.
Configuración e instalación
Follow these steps to set up your animal repellent:
- Desempaque el dispositivo: Carefully remove all components from the packaging. Ensure the main unit, mounting pole sections, and ground stake are present.
- Ensamblar el poste de montaje: Connect the pole sections together. Attach the main unit to the top of the assembled pole.
- Inserte las baterías: Open the battery compartment on the back of the unit. Insert the included batteries, ensuring correct polarity. Close the compartment securely.
- Elija una ubicación:
- Select an area where animal activity is observed.
- Asegúrese de que el panel solar reciba luz solar directa durante varias horas al día para mantener la carga de la batería.
- Position the device so the PIR sensor faces the area you wish to protect.
- Avoid placing it behind large obstacles that could block the sensor or sunlight.
- Instale el dispositivo:
- Instalación de tierra: Gently push the ground stake into the soil until the unit is stable and at the desired height. Do not force it into hard ground; pre-dig a small hole if necessary.
- Montaje en pared: (Optional) Use the mounting holes on the back of the unit to secure it to a wall or fence using appropriate screws (not included).
Figure 3: The Kerbl SonicFlash 299906 installed in the ground using its stake. This image demonstrates the typical outdoor placement of the device, with the solar panel facing upwards for charging and the sensor facing outwards.
Instrucciones de funcionamiento
Once installed, adjust the settings to suit your needs.
- Encendido: The device typically activates automatically once batteries are inserted and it detects motion. Some models may have an ON/OFF switch; refer to the specific product label if present.
- Adjust Sensitivity (Left Knob):
- Turn the left knob (labeled "Sensitive" or similar) to adjust the detection range of the PIR sensor.
- Rotate clockwise for a wider and more sensitive detection range.
- Rotate counter-clockwise for a narrower and less sensitive detection range.
- Adjust as needed to avoid false triggers from small movements or distant objects.
- Select Frequency (Right Knob):
- Turn the right knob (labeled "Freq" or similar) to select one of the 5 available ultrasonic frequencies.
- Each frequency setting is designed to target different animal species. Experiment with different settings to find the most effective one for the animals you wish to repel.
- The device may also emit a flash light when motion is detected, especially in low-light conditions, to enhance deterrence.
The PIR motion detector is designed to react only to body heat, minimizing unwanted activations from non-living objects like leaves or branches.
Figure 4: The Kerbl SonicFlash 299906 discreetly placed in a garden environment. This image illustrates how the device blends into natural surroundings while providing protection.
Mantenimiento
- Limpieza: Periodically wipe the solar panel and the PIR sensor window with a soft, damp cloth to ensure optimal performance. Do not use abrasive cleaners.
- Comprobación de la batería: While the solar panel charges the battery, prolonged periods of low sunlight may reduce effectiveness. If the device seems less responsive, check the battery charge or replace batteries if necessary.
- Almacenamiento estacional: If storing the device for an extended period, remove the batteries and store the unit in a dry, cool place.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Device not activating. |
|
|
| Device activates too frequently (false alarms). |
|
|
| Animals are not deterred. |
|
|
Presupuesto
- Número de modelo: 299906
- Tecnología: Ultrasonic, PIR Infrared Sensor, Flash Light
- Fuente de energía: Solar Panel, Battery (included)
- Frecuencias ajustables: 5 configuraciones
- Fabricante: Albert Kerbl GmbH
- Dimensiones del paquete: 100 x 80 x 50 cm
- Peso: 80 kg (Note: This is likely package weight.)
- ASIN: B096BGGTT3
- Primera fecha disponible: 1 de junio de 2021
Garantía y soporte
For information regarding warranty and returns, please refer to the retailer's policies where the product was purchased. For purchases made on Amazon.it, please consult their help pages:
- For returns within 30 days due to a change of mind: Política de devoluciones de Amazon
- For defective or damaged products: Amazon Defective/Damaged Products Policy
- For Marketplace purchases: Amazon Marketplace Purchases Policy
For further product support, please contact the manufacturer, Albert Kerbl GmbH, or your local distributor.
