Introducción
This manual provides essential information for the installation, operation, and maintenance of the ALLIANCE LAUNDRY SYSTEMS D513797P Dryer Output Control Board. This genuine OEM part is designed to replace the control board in various commercial dryer models, ensuring proper functionality and control of the appliance.
Precauciones de seguridad
ADVERTENCIA: Riesgo de descarga eléctrica o lesiones.
Always disconnect the appliance from all utilities (power, gas, water) before attempting any installation, maintenance, or repair. Failure to do so can result in serious injury or death. It is highly recommended to use appropriate personal protective equipment (PPE), such as safety gloves and eye protection, during installation.
If you are unsure about any step, consult a qualified technician. Do not attempt to install this part if you lack the necessary skills or tools.
Producto terminadoview
Figure 1: The ALLIANCE LAUNDRY SYSTEMS D513797P Dryer Output Control Board. This image shows the green circuit board housed within a black plastic casing, featuring various electronic components, connectors, and a large capacitor. The board is designed to manage the output functions of a commercial dryer.
The D513797P is a genuine OEM control board designed for commercial dryer applications. It serves as the central control unit for managing various output functions of the dryer, ensuring proper operation of cycles and components.
Qué incluye:
- One (1) ALLIANCE LAUNDRY SYSTEMS D513797P Control Board
Configuración e instalación
This control board is a replacement part. Installation should only be performed by individuals with experience in appliance repair and electrical systems, adhering strictly to all local electrical codes and safety regulations.
- Preparación: Ensure the dryer is completely disconnected from its power source and any gas or water lines.
- Acceso: Locate and open the dryer's control panel or access area to expose the existing control board. Refer to your specific dryer model's service manual for detailed access instructions.
- Documentación: Before disconnecting any wires, take clear photographs or make detailed diagrams of all wire connections to the old control board. This will serve as a crucial reference during reinstallation.
- Eliminación: Carefully disconnect all wiring harnesses and mounting screws securing the old control board. Remove the old board from the dryer.
- Instalación: Position the new D513797P control board in the same location as the old one. Secure it with the appropriate mounting screws.
- Conexión: Reconnect all wiring harnesses to the new control board, ensuring each connection matches your documentation from step 3. Verify that all connections are secure and properly seated.
- Reensamblaje: Close and secure the dryer's control panel or access area.
- Pruebas: Reconnect the dryer to its power source. Perform a functional test to ensure the dryer operates correctly with the new control board. Observe for any unusual behavior or error codes.
If the dryer does not function as expected after installation, re-check all connections and consult the troubleshooting section or a qualified technician.
Principios de funcionamiento
The D513797P control board is an internal component that manages the operational logic of the dryer. It receives inputs from user controls (e.g., cycle selection, temperature settings) and various sensors (e.g., thermistors, moisture sensors) and then sends commands to output components such as the heating element, motor, and fan. Users interact with the dryer's external interface, and the control board translates these interactions into the appropriate dryer functions.
Proper operation of the dryer relies on the correct functioning of this control board. No direct user operation of the control board itself is required or possible.
Mantenimiento
The D513797P control board is a sealed electronic component and does not require routine user maintenance. To ensure its longevity and proper function:
- Mantener seco: Ensure the dryer environment remains dry and free from excessive humidity or water exposure, which can damage electronic components.
- Limpiar los respiraderos: Regularly clean the dryer's lint filter and exhaust vents to prevent overheating, which can stress electronic components.
- Energía estable: Ensure the dryer is connected to a stable power supply. Power surges or fluctuations can potentially damage electronic boards. Consider using a surge protector if power stability is a concern in your area.
Solución de problemas
If your dryer experiences issues after replacing the control board, or if you suspect the control board is malfunctioning, consider the following:
| Síntoma | Posible causa | Acción |
|---|---|---|
| Dryer does not power on. | Loose power connection, tripped circuit breaker, faulty power outlet. | Check power cord, reset circuit breaker, test outlet. Verify all internal connections to the control board are secure. |
| Dryer starts but stops unexpectedly. | Overheating, sensor malfunction, intermittent connection. | Clean lint filter and exhaust vent. Check for error codes. Ensure all wire harnesses are firmly seated on the control board. |
| Specific functions (e.g., heat, tumble) not working. | Faulty component connected to the board, wiring issue, or board malfunction. | Verify connections to the specific component. If other components work, the issue might be with the component itself or its wiring, not necessarily the board. |
| Se muestran códigos de error. | Indica una falla específica del sistema. | Consult your dryer's service manual for the meaning of the error code and recommended diagnostic steps. |
If troubleshooting steps do not resolve the issue, it is recommended to contact a qualified appliance technician or ALLIANCE LAUNDRY SYSTEMS customer support for further assistance.
Presupuesto
| Atributo | Detalle |
|---|---|
| Marca | ALLIANCE LAUNDRY SYSTEMS |
| Número de modelo | D513797P |
| Tipo de pieza | Dryer Output Control Board |
| Peso del artículo | 1.35 libras |
| Dimensiones del producto | 6 x 5.8 x 3 pulgadas |
| Componentes incluidos | Tablero de control |
| Reemplaza números de pieza | 513797P, 513797, D513797 |
| Marcas compatibles | Speed Queen, Unimac, Huebsch, Ipso, Alliance |
Garantía y soporte
For information regarding warranty coverage for the D513797P Control Board, please refer to the documentation provided with your original dryer purchase or contact ALLIANCE LAUNDRY SYSTEMS directly. Warranty terms may vary based on the point of purchase and regional policies.
For technical support, parts inquiries, or service assistance, please contact ALLIANCE LAUNDRY SYSTEMS customer service or visit their official website. Ensure you have your dryer's model and serial number, along with the D513797P part number, ready when contacting support.
Note: This manual is for informational purposes only and does not supersede any official service manuals or safety guidelines provided by the appliance manufacturer.
