1. Introducción
This manual provides detailed instructions for the installation, operation, and maintenance of your LUXRITE 4-inch LED Regressed Downlight with Junction Box. This fixture offers versatile lighting with three selectable color temperatures (3000K, 4000K, 5000K) and dimmable functionality, designed for both indoor and outdoor use.
Image 1.1: The LUXRITE 4-inch LED Regressed Downlight with its integrated junction box and wiring connectors.
2. Información de seguridad
Lea y comprenda todas las instrucciones antes de comenzar la instalación. De lo contrario, podría producirse una descarga eléctrica, un incendio u otros peligros que podrían causar lesiones o daños materiales.
- ADVERTENCIA: Riesgo de shock eléctrico. Desconecte la energía en el fusible o disyuntor antes de realizar la instalación o el mantenimiento.
- ADVERTENCIA: Riesgo de incendio. Conductores de alimentación a una temperatura mínima de 90 °C. Consulte a un electricista cualificado para garantizar la correcta conexión del conductor del circuito derivado.
- No haga ni altere ningún orificio abierto en el gabinete del cableado o de los componentes eléctricos durante la instalación del kit.
- Para evitar daños o abrasión en el cableado, no exponga el cableado a bordes de chapa metálica ni a otros objetos afilados.
- Este accesorio es adecuado para damp locations and IC (Insulation Contact) rated, meaning it can be in direct contact with insulation.
- Asegúrese de que todas las conexiones estén seguras y adecuadamente aisladas.
3. Contenido del paquete
Verifique que todos los componentes estén presentes antes de la instalación:
- Luminaria LED
- Caja de conexiones
- Conectores rápidos
- Spring Loaded Clips
4. Especificaciones
| Característica | Especificación |
|---|---|
| Marca | LUXRITA |
| Número de modelo | LR23265 |
| Tamaño | 4 pulgadas |
| Quétage | 15 vatios |
| Brillo | 1200 lúmenes |
| Opciones de temperatura de color | 3000K (Soft White), 4000K (Cool White), 5000K (Bright White) |
| Índice de reproducción cromática (IRC) | 90 |
| Ángulo del haz | 36° |
| Regulable | Sí (100% a 5%) |
| Volumentage | 120 voltios |
| Vida | 50,000 horas |
| Calificaciones | IC Rated, Damp Rated, ETL Listed |
| Material | Metal |
| Dimensiones del producto | 4.8 x 3 x 4.8 pulgadas |
Imagen 4.1: Vista superior y lateral view showing the 4.8-inch diameter and 3-inch height of the downlight.
Imagen 4.2: Detallada view of the junction box (3.38 x 3.3 inches) and the narrow focus lens providing a 36° spotlight.
5. Instrucciones de instalación
Follow these steps for proper installation. Always ensure power is disconnected before starting.
- Prepare el techo: Cut a 4-1/4 inch diameter hole in the ceiling at the desired installation location. Ensure there is at least 3 inches of clearance space above the ceiling for the fixture.
- Cableado de la caja de conexiones: Open the junction box. Connect the electrical supply wires to the quick connectors inside the junction box. Match black to black (live), white to white (neutral), and green/bare copper to green (ground).
- Seleccionar temperatura de color: Before closing the junction box, locate the 3 CCT (Correlated Color Temperature) switch inside. Select your preferred color temperature: 3000K (Soft White), 4000K (Cool White), or 5000K (Bright White).
- Conecte la luz descendente a la caja de conexiones: Connect the cable from the downlight fixture to the junction box.
- Insertar caja de conexiones: Carefully insert the wired junction box through the ceiling hole.
- Instalar Downlight: Push the spring-loaded clips on the sides of the downlight fixture upwards. Insert the downlight into the ceiling hole. Release the clips to secure the fixture flush against the ceiling.
Image 5.1: Visual guide for cutting the hole, wiring the junction box, selecting color, connecting the downlight, and securing it with spring clips.
Image 5.2: Close-up of the 3 CCT switch located within the junction box for color temperature selection.
6. Instrucciones de funcionamiento
Once installed, your LUXRITE LED Regressed Downlight is ready for use.
6.1 Selección de temperatura de color
The color temperature is selected via a switch inside the junction box during installation (refer to Section 5, Step 3). You can choose between 3000K (Soft White), 4000K (Cool White), and 5000K (Bright White) to match your desired ambiance.
Image 6.1: Visual representation of the different lighting effects provided by 3000K, 4000K, and 5000K color temperatures in various room settings.
6.2 Funcionalidad de atenuación
This downlight is dimmable, allowing you to adjust the light output from 100% down to 5%. Ensure you use a compatible LED dimmer switch for optimal performance without flickering. Refer to the compatible dimmer list below.
Image 6.2: Demonstration of smooth dimming and a list of compatible dimmer brands.
6.3 Compatible Dimmer List
| Marca | Modelo |
|---|---|
| LUTRON | CTCL-153P, DVCL-153P, S-600P, SLV-600P, CN-600P, DVWCL-153P, CTCL-153PR, DVCL-153PR |
| LEVITON | 6672, 6674 |
Note: The presence of a dimmer on this chart is not a guarantee of compatibility in every installation. Always refer to the dimmer manufacturer's instructions for installation and further information.
7. Mantenimiento
The LUXRITE LED Regressed Downlight is designed for long-lasting, maintenance-free operation with an average life of 50,000 hours.
- Limpieza: Para limpiar el dispositivo, asegúrese de que esté apagado. Use un paño suave, seco o ligeramente húmedo.amp Paño. No utilice productos químicos agresivos ni limpiadores abrasivos, ya que pueden dañar el acabado o los componentes eléctricos.
- Sin reemplazo de bombilla: This integrated LED fixture does not require bulb replacement.
8. Solución de problemas
If you experience issues with your downlight, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no enciende | No power supply, loose wiring, incorrect color temperature setting. | Check circuit breaker. Verify all wire connections are secure. Ensure the CCT switch is set to a valid position. |
| La luz parpadea o zumba | Interruptor de atenuación incompatible, cableado suelto. | Ensure a compatible LED dimmer is used (refer to Section 6.3). Check all wiring connections. |
| Temperatura de color incorrecta | El interruptor CCT está configurado incorrectamente. | Acceda a la caja de conexiones y ajuste el interruptor CCT a la configuración deseada. |
9. Vídeo del producto
Vea el video oficial del producto para obtener una visión general.view of the LUXRITE 4-inch LED Regressed Downlight's features and benefits.
Vídeo 9.1: Vídeo oficial de presentación del productoasing the LUXRITE 4-inch LED Regressed Downlight, highlighting its features like baffle trim, damp rating, 15W power, 1200 lumens, 50,000 hours lifetime, and available round and square options. It also demonstrates the 3 color temperatures (3000K, 4000K, 5000K) and smooth dimming capabilities from 100% to 10%.
10. Garantía y soporte
This LUXRITE product comes with a manufacturer's warranty. For specific warranty details and support, please refer to the documentation included with your purchase or contact LUXRITE customer service.
- Garantía del fabricante: The product is covered by a manufacturer's warranty.
- Planes de protección: Es posible que estén disponibles para su compra planes de protección adicionales.
