1. Producto terminadoview
The Elitech ECB-5080S is an advanced electrical control box designed for precise temperature management in various applications. It integrates an MTC-6000N controller to manage cooling, defrosting, and fan operations. This unit is suitable for systems requiring 3-phase 380V power and up to 15Hp capacity, offering comprehensive protection features for reliable operation.
Imagen 1: Frente view of the Elitech ECB-5080S Electrical Control Box, showing the control panel with two digital displays, indicator lights for Power, Comp, Defr, Fan, and Fault, and an ON/OFF switch.
2. Características principales
- Monitoreo remoto: Parameters can be viewed or set remotely via website and mobile application. Data and graph reports are available in real-time.
- Pantalla doble: Shows temperature on both integrated temperature controllers. Multiple indicator lights display the operational status of each connected device.
- Alarmas múltiples: Provides alerts for temperature over-limit, over-range conditions, or sensor malfunctions.
- Protección integral: Includes high-pressure, low-pressure, module, overload, phase sequence, phase loss, three-phase unbalance, and inverse time protection.
- Funcionalidad: Offers refrigeration, defrosting, and fan three-way output. Equipped with two storage temperature sensors and one defrosting temperature sensor.
3. Configuración e instalación
Proper installation is crucial for the safe and efficient operation of the ECB-5080S control box. It is recommended that installation be performed by a qualified electrician.
- Montaje: Securely mount the control box in a suitable location, ensuring adequate ventilation and protection from environmental elements.
- Conexión de energía: Connect the 3-phase 380V power supply to the designated terminals. Verify correct phase sequence and voltage.
- Conexiones de carga: Connect the refrigeration unit, defrosting heaters, and fan motors to their respective output terminals as per the wiring diagram (refer to the detailed wiring diagram provided with the product packaging).
- Instalación de sensores: Install the two storage temperature sensors and one defrosting temperature sensor in their appropriate locations within the controlled environment. Ensure sensors are correctly positioned for accurate readings.
- Toma de tierra: Asegúrese de que la caja de control esté correctamente conectada a tierra para evitar riesgos eléctricos.
Imagen 2: En ángulo view of the Elitech ECB-5080S Electrical Control Box, highlighting the side ventilation and overall robust construction.
4. Instrucciones de funcionamiento
The ECB-5080S utilizes an MTC-6000N controller for its primary functions. Familiarize yourself with the controller's interface for optimal use.
- Encendido/apagado: Use the main ON/OFF switch on the front panel to power the unit.
- Pantalla de temperatura: The dual digital displays show current temperatures. Refer to the MTC-6000N controller manual for specific display interpretations.
- Configuración de parámetros: Access the controller's menu to set desired temperature ranges, defrost cycles, fan operation modes, and alarm thresholds. Consult the MTC-6000N controller's dedicated manual for detailed parameter setting procedures.
- Luces indicadoras:
- FUERZA: Indica que la unidad está recibiendo energía.
- COMPRAR: Indicates the compressor (cooling) is active.
- DEFR: Indicates the defrost cycle is active.
- VENTILADOR: Indicates the fan is operating.
- CULPA: Illuminates when an error or alarm condition is detected. Refer to troubleshooting for details.
- Acceso remoto: Utilize the Elitech website or mobile application for remote monitoring and parameter adjustments. Ensure the unit is connected to a network as per its network configuration guide.
Imagen 3: Primer plano view of the Elitech ECB-5080S control panel, emphasizing the ON/OFF switch and the two integrated temperature controllers.
5. Mantenimiento
Regular maintenance ensures the longevity and optimal performance of your ECB-5080S control box.
- Limpieza: Periodically clean the exterior of the control box with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ventilación: Ensure that ventilation openings are clear of dust and obstructions to prevent overheating.
- Conexiones: Inspeccione anualmente todas las conexiones eléctricas para comprobar su estanqueidad y detectar posibles signos de corrosión. Apriete las conexiones sueltas.
- Verificación de sensores: Verify that temperature sensors are clean and securely mounted. Check sensor cables for damage.
- Actualizaciones de software: Check the Elitech website or app for any available firmware updates for the MTC-6000N controller to ensure optimal functionality and security.
6. Solución de problemas
This section provides solutions to common issues. For complex problems, contact Elitech technical support.
| Problema | Posible causa | Solución |
|---|---|---|
| La unidad no se enciende. | No power supply; main switch off; faulty wiring. | Check power source; ensure main switch is ON; inspect wiring connections. |
| La visualización de la temperatura es inexacta. | Faulty sensor; sensor incorrectly placed; wiring issue. | Check sensor connections; verify sensor placement; replace faulty sensor if necessary. |
| El indicador FAULT está encendido. | Over-limit temperature; sensor error; protection activated (e.g., phase loss). | Check alarm messages on controller; inspect sensors; verify power supply and phase integrity. |
| Cooling/Defrost/Fan not operating. | Incorrect parameter settings; faulty output relay; motor/component failure. | Verify controller settings; check indicator lights; inspect connected components. |
7. Especificaciones
| Marca | Élitech |
| Número de modelo | BCE-5080S |
| Volumentage | 380 Volts (3 Phase) |
| Potencia máxima | 15 caballos de fuerza |
| Tipo de controlador | MTC-6000N |
| Funciones | Refrigeration, Defrosting, Fan Control |
| Funciones de protección | High/Low Pressure, Module, Overload, Phase Sequence/Loss, Three-phase Unbalance, Inverse Time |
| ASIN | B097MXGKFP |
| Código Postal | 781454242337 |
