FLAMMA FC01 Drum Loop Pedal

1. Guía de configuración

1.1 Desembalaje e inspección

Carefully remove the FLAMMA FC01 Drum Loop Pedal and its accessories from the packaging. Inspect all components for any signs of damage during transit. Retain the packaging for future storage or transport.

1.2 Conexión de la fuente de alimentación

The FC01 pedal requires a 9V DC power supply with a center-negative polarity and a current rating of at least 300mA. Use the included 9V 300mA power adapter for optimal performance.

Image: The FLAMMA FC01 Drum Loop Pedal (purple) shown alongside its included 9V 300mA power supply (black adapter and cable).

Ensure the power adapter's connector matches the pedal's input specifications (5.5x2.1mm, center negative).

Image: Close-up of the power supply connector, illustrating the 5.5x2.1mm size and center-negative polarity diagram.

Image: The 9V 300mA power supply with a measurement indicating its cable length of 59.1 inches.

1.3 Connecting to Your Setup

Connect your instrument (e.g., guitar) to the FC01's INPUT jack using a standard 1/4-inch instrument cable. Connect the FC01's OUTPUT jack to your amplifier or other effects pedals in your signal chain.

2. Instrucciones de funcionamiento

2.1 Másview de modos

The FLAMMA FC01 offers three distinct operational modes:

• Modo de batería: Functions as a standalone drum machine.
• Modo de bucle: Functions as an individual looper with 20 minutes of loop time and unlimited recordings.
• Drum Looper Mode (L+D): Combines both drum machine and looper functionalities, allowing simultaneous use.

Image: A graphic illustrating the "2-in-1 Drum Looper" feature, highlighting the Looper (44.1kHz 16bit loop station) and Drum (16 drum grooves from 2 music styles) functionalities.

2.2 Drum Machine Features

The FC01 includes 8 distinct drum groove styles with 16 variations, providing a diverse range of rhythms for practice or performance.

2.2.1 Función Tap Tempo

Effortlessly control the tempo of the drum grooves using the intuitive tap tempo feature. Tap the footswitch multiple times to set the desired tempo.

Image: The FLAMMA FC01 pedal connected to a guitar, with text overlay "Tap into the Rhythm" and "Effortlessly control your tempo", demonstrating the tap tempo feature.

2.3 Looper Features

The looper module offers 20 minutes of recording time and supports unlimited overdubs, allowing for complex layered performances.

2.3.1 Bypass verdadero

The FC01 features true bypass circuitry, ensuring that your instrument's signal remains pure and unaffected when the pedal is disengaged.

Image: A close-up of the FLAMMA FC01 pedal's footswitch area, with text overlay "True Bypass" and "Maintain Signal Purity and Dynamics for a Natural Playing Experience".

2.4 Controles e indicadores

The pedal features various controls for adjusting drum volume, loop volume, and selecting drum styles. Refer to the markings on the pedal for specific knob functions.

LED indicators provide visual feedback on the current mode and recording status.

3. Mantenimiento

3.1 Limpieza

Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents, which may damage the finish.

3.2 Almacenamiento

Cuando no lo utilice durante períodos prolongados, desconecte la fuente de alimentación y guarde el pedal en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.

4. Solución de problemas

4.1 Sin energía

• Ensure the 9V DC power adapter is correctly connected and plugged into a working power outlet.
• Verify that the power adapter meets the pedal's specifications (9V, center-negative, at least 300mA).

4.2 No hay sonido o señal débil

• Check all instrument cables for proper connection and ensure they are not faulty.
• Verifique que su instrumento y ampLos lifiers están funcionando correctamente.
• Adjust the volume knobs on the FC01 pedal (Looper and Drum volumes) to appropriate levels.
• If using other pedals, temporarily bypass them to isolate the issue.

4.3 Difficulty with Looping or Drum Control

• Familiarize yourself with the footswitch operations for recording, playback, and overdubbing, as timing is crucial for looping.
• Practice using the tap tempo function to synchronize the drum machine with your playing.
• Refer to the product's quick start guide or online resources for detailed operational sequences if the controls feel complex.

5. Especificaciones

6. Garantía y soporte

For warranty information and technical support, please refer to the official FLAMMA webSitio web o contacte directamente con el servicio de atención al cliente. Conserve su recibo de compra como comprobante.

Official FLAMMA Store: Tienda FLAMMA en Amazon