Manuales+

Lepro PR410082-RGB-JP

Lepro 5m RGB LED Strip Light Instruction Manual

Model: PR410082-RGB-JP

Introducción

Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.

¿Qué hay en la caja?

Verifique que todos los componentes estén presentes antes de comenzar la instalación:

  • LED Strip Light (5 meters) x 1
  • DC12V Power Adapter x 1
  • Connection Receiver x 1
  • Control remoto x 1
  • Instruction Manual (Japanese) x 1
Contents of the Lepro 5m RGB LED Strip Light package
Image: Package contents including the LED strip, power adapter, receiver, and remote control.

Información de seguridad

  • Este producto está diseñado para Sólo para uso en interiores. No exponer al agua ni a humedades elevadas.
  • Asegúrese de que la fuente de alimentación esté desconectada antes de la instalación o el mantenimiento.
  • Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
  • No doble bruscamente la tira de LED ni aplique fuerza excesiva, ya que esto puede dañar el circuito.
  • Mantener fuera del alcance de los niños.
  • If any part of the product is damaged, discontinue use immediately and contact support.

Configuración

Siga estos pasos para una correcta instalación de su tira de luces LED:

  1. Prepare la superficie: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
  2. Medir y cortar (opcional): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. Nota: Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
  3. Aplicar la tira: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
  4. Conectar componentes: Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
  5. Encendido: Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
Step-by-step installation guide for the LED strip light
Image: Visual guide showing how to stick, cut, connect, and power on the LED strip.
Close-up of the 3M adhesive tape on the LED strip
Image: The strong 3M double-sided adhesive tape for secure mounting.
LED strip showing cut marks for customization
Image: The LED strip can be cut at designated marks to fit your desired length.
Video: A demonstration of the LED strip light in various indoor settings, showcasing its versatility and color-changing capabilities.

Instrucciones de funcionamiento

The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.

Funciones del control remoto:

Diagram of the 44-key remote control for the LED strip light
Image: Layout of the 44-key remote control with labeled functions.
  • Encendido/apagado: Presione el botón de encendido rojo Para encender o apagar las luces.
  • Ajuste de brillo: Utilice el Botones de flecha arriba y abajo (labeled 'Brightness Adjust') to increase or decrease the light intensity.
  • Selección de colores: Elige entre 20 colores preestablecidos by pressing the corresponding color buttons.
  • Modos de bricolaje: El DIY1-DIY6 buttons allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
  • Modos dinámicos:
    • RÁPIDO/LENTO: Ajustar la velocidad de los modos dinámicos.
    • COCHE: Recorre todos los modos dinámicos automáticamente.
    • DESTELLO: Flashes through colors.
    • SALTAR3/SALTAR7: Jumps between 3 or 7 colors.
    • FUNDIDO3/FADE7: Fades between 3 or 7 colors.
Video: A demonstration of the remote control in action, showing how to change colors and modes for the LED strip light.

Mantenimiento

  • Limpieza: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
  • Almacenamiento: If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
  • Cuidado del adhesivo: The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.

Solución de problemas

ProblemaPosible causaSolución
La tira de LED no se enciende.1. Power adapter not plugged in.
2. Remote control insulation sheet not removed.
3. Connections are loose or incorrect.
4. Remote control battery is dead.		1. Ensure power adapter is securely plugged into an outlet.
2. Remove the clear plastic insulation sheet from the remote control battery compartment.
3. Check all connections, ensuring arrows align between the strip and receiver.
4. Replace the remote control battery (CR2025 or equivalent).
El control remoto no responde.1. Remote not pointed at receiver.
2. Obstruction between remote and receiver.
3. Remote control battery is dead.		1. Point the remote directly at the receiver.
2. Remove any objects blocking the line of sight.
3. Reemplace la batería del control remoto.
Algunas secciones de la franja no están iluminadas.1. Damage to the LED strip.
2. Incorrect cutting.		1. Inspect the strip for physical damage. If damaged, contact support.
2. Ensure cuts were made only at designated marks.

Presupuesto

  • Número de modelo: PR410082-RGB-JP
  • Marca: Lepro
  • Tipo de fuente de luz: LED (SMD5050)
  • Cantidad de LED: 150 LEDs (30 LEDs per meter)
  • Longitud de la tira: 5 metros
  • Consumo de energía: 18 W
  • Vol de entradatage: 12 V CC, 1.5 A
  • Opciones de color: RGB (20 preset colors + DIY modes)
  • Método de control: 44-key IR Remote Control
  • Uso interior / exterior: Interior
  • Características especiales: Dimmable, Cuttable, 3M Adhesive, PSE Certified
  • Tamaño del paquete: 13.1 x 10.7 x 6.7 cm; 230 g
Comparison of LED density: Lepro 30 LEDs/M vs. others 12 LEDs/M
Image: Illustrates the higher LED density of Lepro strips (30 LEDs/meter) compared to others (12 LEDs/meter) for brighter illumination.

Garantía y soporte

This Lepro LED Strip Light comes with a 2 año de garantía. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.

For further assistance, you can visit the official Lepro store on Amazon: Tienda de Amazon Lepro