1. Introducción
This manual provides essential instructions for the safe and effective installation, operation, and maintenance of the Okin JLDQ-12 and JLDQ.12.133.226M power recliner and bed motor actuator replacement. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
2. Producto terminadoview y componentes
The Okin JLDQ.12.133.226M is an electric linear actuator designed for power recliners and adjustable beds. It is specifically engineered as a direct replacement for the original Okin JLDQ.12.133.226M model.
2.1 componentes clave
- Motor del actuador: The main unit responsible for linear movement.
- Conectores:
- Enchufe redondo de 5 pines: Para conectar al control manual del interruptor.
- Enchufe cuadrado de 2 clavijas: Para conectar a la fuente de alimentación.
Figure 1: Okin JLDQ.12.133.226M motor actuator with attached cables.
Figura 2: detallada view of the 5-pin round plug for the recliner switch and the 2-pin square plug for the power supply.
3. Especificaciones
| Característica | Detalle |
|---|---|
| Nombre del modelo | JLDQ.12.133.226M |
| Capacidad de carga | Push force: 750N, Pull force: 750N |
| Ataque | 226 milímetros |
| Tamaño mínimo de instalación (reducción) | 133 milímetros |
| Tamaño máximo de instalación | 359 milímetros |
| Frecuencia de operación | Encendido 1 min / Apagado 8 min |
| Velocidad | 29 V CC SMPS, 10 segundos sin carga |
| Apariencia | Negro (PA), Blanco Plata (Aluminio) |
| Dimensiones del producto | 8.9 x 8.9 x 14.13 pulgadas |
| Peso del artículo | 4.59 libras (2.09 kilogramos) |
Figure 3: Product label displaying technical data and model information, including serial number Segundo trimestre de 21061699 y modelo JLDQ.12.133.226M. For patent information, visit www.dewertokin.de/patentes.
4. Configuración e instalación
Nota importante de compatibilidad: This motor is specifically designed to replace the OKIN model JLDQ.12.133.226M. Different actuator/motors are generally not compatible due to strict requirements for minimum installation dimensions, stroke, and plug types. Always verify your existing motor's brand and model before attempting replacement.
4.1 Comprobaciones previas a la instalación
- Verificar modelo: Confirm that your existing motor is an Okin JLDQ.12.133.226M.
- Desconexión de energía: Ensure the power supply to the recliner or bed is completely disconnected before starting any installation work.
- Inspeccionar componentes: Check the new motor and cables for any visible damage.
4.2 pasos de instalación
- Quitar el motor viejo: Carefully detach the old motor from the recliner or bed frame. Note how it was connected to ensure correct installation of the new unit.
- Posición del nuevo motor: Align the new Okin JLDQ.12.133.226M motor with the mounting points on the frame.
- Motor seguro: Fasten the motor securely to the frame using appropriate hardware (not included, typically reused from the old motor or provided with the furniture).
- Conectar cables:
- Conectar el enchufe redondo de 5 clavijas to the hand control switch.
- Conectar el 2-pin square plug to the power supply unit.
- Sistema de organización de cables: Ensure all cables are routed safely, away from moving parts, and secured to prevent pinching or damage.
Figura 4: Example of the motor actuator mounted, showing its extended position.
5. Instrucciones de funcionamiento
Once the motor is correctly installed and all connections are secure, reconnect the main power supply to your recliner or adjustable bed.
- Encendido: Plug the recliner/bed into a suitable power outlet.
- Control manual: Use the hand control unit to operate the recliner or bed. Press and hold the appropriate buttons to extend or retract the actuator, adjusting the position as desired.
- Ciclo de trabajo: Adhere to the specified operation frequency: On 1 minute / Off 8 minutes. Continuous operation beyond 1 minute can lead to overheating and damage to the motor. Allow the motor to cool down for at least 8 minutes after 1 minute of continuous use.
6. Mantenimiento
Regular maintenance ensures the longevity and reliable operation of your Okin motor actuator.
- Limpieza: Wipe clean the exterior of the motor and cables with a dry or slightly damp Paño. No utilice limpiadores abrasivos ni sumerja la unidad en agua.
- Inspección de cables: Periodically check all cables and connections for wear, fraying, or loose plugs. Ensure they are securely attached and not pinched.
- Partes móviles: Ensure the linear shaft moves freely and is not obstructed by debris or fabric.
- Lubricación: El motor generalmente no requiere mantenimiento en cuanto a lubricación interna. No intente lubricar los componentes internos a menos que el soporte técnico de Okin se lo indique específicamente.
7. Solución de problemas
If your recliner or adjustable bed is not functioning correctly, follow these troubleshooting steps:
- Sin movimiento:
- Check if the power cord is securely plugged into the wall outlet and the power supply unit.
- Verify that the 2-pin square plug from the motor is firmly connected to the power supply.
- Ensure the 5-pin round plug from the motor is properly connected to the hand control.
- Pruebe el tomacorriente de pared con otro aparato para confirmar que tenga energía.
- Intermittent Movement:
- Inspeccione todas las conexiones de cables para detectar si están flojas o dañadas.
- Ensure the motor is not overheating. Allow it to cool down if it has been operated continuously.
- Ruidos inusuales:
- Check for any obstructions around the motor or the linear shaft.
- Ensure the motor is securely mounted and not vibrating against the frame.
- Motor Does Not Extend/Retract Fully:
- Verify that there are no physical obstructions preventing full movement.
- Ensure the motor is correctly installed with the specified minimum and maximum installation sizes.
If issues persist after following these steps, contact Okin customer support or a qualified technician.
8. Información importante de seguridad
- Always disconnect power before performing any installation, maintenance, or cleaning.
- Este producto está diseñado únicamente para uso en interiores.
- Do not allow children or pets to play near the moving parts of the recliner or bed.
- Ensure proper cable routing to prevent tripping hazards or damage to the cables.
- Do not attempt to modify the motor or its components. Unauthorized modifications can lead to malfunction and void the warranty.
- Only use this motor as a replacement for the specified Okin JLDQ.12.133.226M model. Using incompatible parts can cause damage to the furniture and the motor.
9. Garantía y soporte
For warranty information, technical support, or further assistance, please refer to the official Okin website or contact your product retailer. Keep your purchase receipt as proof of purchase for warranty claims.
You can visit the Okin store for more products and information: Tienda Okin en Amazon.
