Introducción
This manual provides instructions for the YAOHUIMI replacement remote control, designed for specific AlpicAir AC air conditioner models. Please read this manual carefully before use to ensure proper operation and compatibility. This remote is an updated version that may appear different from your original remote but is designed to function with the specified AlpicAir units.
Nota importante: This is not a universal remote control. Verify your air conditioner model or original remote control model against the compatible models listed below before attempting to use this replacement unit.
- Compatible AlpicAir AC Models: ADI/ADO-54HPR1B, ADO-26HPR1B, ADI/ADO-26HPR1B, ADI/ADO-35HPR1B, AM-26CPR1, AWI/AWO-71HPR1A, ADO-35HPR1B, ADO-54HPR1B.
Configuración
1. Instalación de la batería
El control remoto requiere dos pilas AAA (no incluidas). Siga estos pasos para instalarlas:
- Abra la tapa del compartimiento de la batería en la parte posterior del control remoto.
- Insert two new AAA batteries, ensuring the positive (+) and negative (-) terminals match the markings inside the compartment.
- Cierre bien la tapa del compartimento de la batería.
Image: A hand holding the remote control, illustrating its size and the general location of the battery compartment on the back.
2. Uso inicial
Once batteries are installed, the remote is ready for use. Point the remote control directly at the air conditioner's receiver. No programming is typically required for this replacement remote if your AC model is listed as compatible.
Instrucciones de funcionamiento
Familiarícese con los botones y sus funciones:
Image: The remote control's display, indicating its ability to show temperature in both Fahrenheit and Celsius, and featuring a green backlight for visibility.
- Botón ON/OFF: Presione para encender o apagar el aire acondicionado.
- Botón MODE: Recorre los modos de funcionamiento: AUTOMÁTICO, FRÍO, SECO, CALOR.
- Botones TEMP ▲ / ▼: Ajuste la temperatura deseada hacia arriba o hacia abajo.
- Botón VELOCIDAD DEL VENTILADOR: Cycles through fan speeds: AUTO, HIGH, MED (Medium), LOW.
- Botón SWING: Activa o desactiva la función de oscilación de aire.
- Botón de dormir: Engages the sleep mode for comfortable night operation.
- Botón TEMPORIZADOR ENCENDIDO: Establece un temporizador para que se encienda el aire acondicionado.
- Botón TEMPORIZADOR APAGADO: Establece un temporizador para que el aire acondicionado se apague.
- Botón de reinicio: Restablece la configuración del control remoto.
- Botón de bloqueo: Bloquea el control remoto para evitar cambios accidentales.
- Botón de PANTALLA LED: Controls the LED display on the air conditioner unit.
- Botón TURBO: Activa el enfriamiento o calentamiento rápido.
- Botón de DIRECCIÓN DEL AIRE: Ajusta la dirección del flujo de aire.
Visualización de temperatura (Fahrenheit/Celsius)
This remote control supports displaying temperature in both Fahrenheit (°F) and Celsius (°C). The display will show the current setting. To switch between Fahrenheit and Celsius, refer to the specific instructions for your AlpicAir AC unit, as this function is typically controlled by a combination of buttons or a dedicated button on the remote (often the TEMP ▲ and ▼ buttons pressed simultaneously, or a small button inside the battery compartment, though not explicitly stated for this model).
Image: A visual representation of the remote's display showing temperature in both Fahrenheit (84°F) and Celsius (24°C).
Luz de fondo verde
The remote control features a green backlight for improved visibility in low-light conditions or at night. The backlight activates automatically when buttons are pressed and typically turns off after a few seconds of inactivity.
Imagen: Un primer plano view of the remote control's display, clearly showing the green backlight feature in action.
Mantenimiento
Reemplazo de batería
Replace batteries when the remote control's response becomes sluggish or the display dims. Always replace both batteries simultaneously with new AAA batteries. Do not mix old and new batteries, or different types of batteries.
Limpieza
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the remote's surface or internal components.
Almacenamiento
Si no se utilizará el control remoto durante un período prolongado, retire las pilas para evitar fugas y posibles daños.
Solución de problemas
- El control remoto no responde:
- Compruebe si las baterías están instaladas correctamente con la polaridad correcta.
- Reemplace las pilas viejas por otras nuevas.
- Asegúrese de que no haya obstrucciones entre el control remoto y el receptor del aire acondicionado.
- Verify that the remote is pointed directly at the air conditioner.
- La pantalla está oscura o en blanco:
- Reemplace las baterías.
- El aire acondicionado no responde a los comandos:
- Confirm that your AlpicAir AC model is listed as compatible with this remote control.
- Try resetting the remote (if a reset button is present, or by removing and reinserting batteries).
- Ensure the air conditioner unit is powered on.
Presupuesto
| Marca | YAOHUIMI |
| Número de modelo | A420210928-(R51)-616 |
| Tecnología de conectividad | Infrarrojo |
| Tipo de controlador | Control de botones |
| Característica especial | Pantalla retroiluminada |
| Fuente de poder | Pilas 2 x AAA (no incluidas) |
Garantía y soporte
Information regarding specific warranty terms is not provided in this manual. For warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly through your purchase platform.
