Introducción
The RØDE PSA1+ is a premium professional studio boom arm engineered to provide silent, smooth, and precise microphone positioning for a variety of applications, including podcasting, streaming, and broadcasting. Its robust construction and thoughtful design ensure optimal performance and a clutter-free workspace.
¿Qué hay en la caja?
Carefully unpack your RØDE PSA1+ and ensure all components are present:
- PSA1+ Professional Studio Arm
- Escritorio Clamp
- Desk Insert (for permanent mounting)
- 3/8" - 5/8" Thread Adaptor
Image: Components included with the RØDE PSA1+ Professional Studio Arm.
Configuración
The PSA1+ offers two primary mounting options: a desk clamp for temporary or non-invasive installation, and a desk insert for a more permanent, flush mount.
Option 1: Desk Clamp Instalación
- Identify a suitable location on your desk or table edge. Ensure the surface is sturdy and can support the weight of the arm and microphone.
- Coloque el escritorio clamp en el borde de tu escritorio.
- Tighten the screw mechanism on the clamp until it is securely fastened to the desk. Do not overtighten, as this may damage your desk.
- Insert the base of the PSA1+ arm into the top opening of the desk clamp.
Option 2: Desk Insert Installation (Permanent)
This option requires drilling a hole into your desk. Proceed with caution and ensure you have the necessary tools and expertise.
- Choose a desired location on your desk for the arm. Ensure there is sufficient clearance underneath for the insert.
- Using an appropriate drill bit (refer to the desk insert for exact diameter, typically around 22mm/0.87 inches), drill a clean hole through your desk.
- Insert the desk insert into the drilled hole from the top.
- Secure the insert from underneath the desk using the provided nut.
- Insert the base of the PSA1+ arm into the opening of the desk insert.
Attaching Your Microphone
- The PSA1+ features a standard microphone thread. If your microphone requires a 5/8" thread, use the included 3/8" to 5/8" adaptor.
- Carefully screw your microphone or microphone shock mount onto the threaded post at the end of the arm.
Image: RØDE PSA1+ with a microphone mounted, demonstrating typical setup.
Gestión de cables
The PSA1+ includes integrated cable management channels to keep your setup tidy and professional.
- Route your microphone cable (XLR or USB) along the arm's channels.
- Secure the cable using the provided clips or ties to prevent tangling and maintain a clean aesthetic.
Image: Integrated cable management on the RØDE PSA1+ arm.
Operating the PSA1+
The PSA1+ is designed for smooth and silent operation, allowing for effortless microphone positioning.
Movement and Positioning
- The parallelogram spring design allows for fluid movement across its entire range. Gently push or pull the arm to adjust the microphone's height and horizontal position.
- The arm offers 360-degree rotation at its base, providing maximum flexibility for microphone placement.
- The fully damped internal springs ensure that the arm remains stable in any position without drifting, and movement is virtually silent, preventing unwanted noise during recordings or broadcasts.
Image: Demonstrating the flexible positioning of the RØDE PSA1+.
Image: Detail of the smooth and silent movement mechanism.
Aislamiento de vibraciones
The PSA1+ is designed to isolate your microphone from desk-borne noise, such as keyboard clicks or mouse movements.
Image: The PSA1+ base providing superior isolation from vibrations.
Mantenimiento
To ensure the longevity and optimal performance of your RØDE PSA1+:
- Regularly wipe down the arm with a soft, dry cloth to remove dust and debris.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or neoprene cover.
- Periodically check the tightness of the desk clamp or desk insert to ensure the arm remains secure.
- Ensure cables are properly routed through the management channels to prevent strain or damage.
Solución de problemas
| Asunto | Posible causa | Solución |
|---|---|---|
| Arm feels loose or unstable | Escritorio clamp/insert is not tight enough. | Apriete el escritorio clamp screw or the nut for the desk insert. |
| Microphone drifts from position | Arm springs may need adjustment (rare for PSA1+ due to damping). Microphone is too heavy for the arm's capacity. | Ensure microphone weight is within specified limits. If issue persists, contact RØDE support. |
| Audible noise from arm movement | Friction or debris in joints (unlikely for PSA1+). | Ensure no foreign objects are lodged in the arm's joints. The PSA1+ is designed for silent operation; if noise occurs, contact RØDE support. |
| Cables are tangled or visible | Enrutamiento inadecuado de cables. | Reroute cables through the integrated cable management channels and secure them with clips. |
Presupuesto
- Modelo: PSA1 +
- Dimensiones del producto (L x An x Al): 21.25 x 8.25 x 3.25 pulgadas
- Peso del artículo: 3.4 libras
- Material: Neoprene (arm cover)
- Color: Negro
- Fabricante: Micrófonos RØDE
- Primero disponible: 5 de octubre de 2021
Garantía y soporte
For information regarding warranty coverage, technical support, or service, please refer to the official RØDE Microphones webSitio web o contacte directamente con el servicio de atención al cliente. Conserve su comprobante de compra para reclamaciones de garantía.
