1. Introducción
The DVDO 1x4 HDMI Splitter with HDR is designed to distribute a single HDMI input signal to four separate HDMI outputs simultaneously. This device supports resolutions up to 4K@60Hz with 4:4:4 chroma subsampling, ensuring high-quality video transmission. It is fully compliant with HDMI 2.0b and HDCP 2.2 specifications, making it compatible with the latest audio and video standards. A built-in scaler allows individual outputs to automatically scale down to 1080P if connected to displays with lower resolution capabilities, providing an optimal signal for each attached display.
2. Características
- HDMI Splitter 1 in 4 out: Distributes one HDMI input signal to four HDMI displays while maintaining signal quality.
- Alto ancho de banda: Compliant with HDMI 2.0b and HDCP 2.2 with 18Gbps bandwidth.
- Soporte de audio avanzado: Fully supports audio formats in HDMI 2.0 specification, including PCM, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, and DTS:X.
- Individual Output Scaling: Each HDMI output supports scaling down to 1080P individually (frame rate remains unchanged when scaling from 4K to 1080P).
- Regeneración de señal: Features automatic input cable equalization for signal regeneration compensation.
- HDR and 3D Support: Supports High Dynamic Range (HDR) and 3D content.
3. Contenido del paquete
Please verify that all items listed below are included in your package. If any items are missing or damaged, please contact DVDO customer support.
Image: The DVDO 1x4 HDMI Splitter with its power adapter and various international plug adapters, along with mounting brackets.
- DVDO 1x4 HDMI Splitter Unit
- Adaptador de corriente continua de 5V
- Soportes de montaje (2)
- Tornillos de montaje
- Manual de usuario (este documento)
4. Configuración e instalación
Follow these steps to properly set up your DVDO 1x4 HDMI Splitter:
Image: Connection diagram illustrating how to connect a source device (e.g., Blu-ray Player) to the HDMI IN port and multiple display devices to the HDMI OUT ports.
- Apagar dispositivos: Ensure all source devices (e.g., Blu-ray player, gaming console) and display devices (e.g., TV, projector) are powered off before making connections.
- Conectar Fuente: Connect an HDMI cable from your source device's HDMI output to the HDMI EN port on the DVDO 1x4 HDMI Splitter.
- Conectar pantallas: Conecte los cables HDMI desde el HDMI OUT 1, 2, 3, and 4 ports on the splitter to the HDMI inputs of your respective display devices.
- Conecte la electricidad: Conecte el adaptador de corriente CC de 5 V incluido a la 5 V CC port on the splitter, then plug the adapter into a standard electrical outlet.
- Encendido: Power on your display devices first, then your source device, and finally the DVDO 1x4 HDMI Splitter. The splitter will automatically detect the input signal and distribute it to all connected displays.
5. Instrucciones de funcionamiento
The DVDO 1x4 HDMI Splitter is designed for plug-and-play operation. Once all connections are made and power is supplied, the unit will automatically detect the input signal and replicate it across all four outputs.
Imagen: Un primer plano view of the front panel of the DVDO 1x4 HDMI Splitter, highlighting the HDMI IN port and the four HDMI OUT ports.
- Distribución de señal: The splitter will mirror the input signal to all four connected displays.
- Automatic Scaling: If a connected display has a lower resolution than the source, the splitter will automatically scale down the signal for that specific output to ensure compatibility (e.g., 4K input to 1080P output).
- Indicadores LED: The unit may feature LED indicators for power and active HDMI connections. Refer to the device itself for specific indicator locations and meanings.
6. Mantenimiento
To ensure optimal performance and longevity of your DVDO 1x4 HDMI Splitter, follow these simple maintenance guidelines:
- Limpieza: Utilice un paño suave y seco para limpiar el exterior de la unidad. No utilice limpiadores líquidos ni aerosoles.
- Ventilación: Asegúrese de que la unidad esté ubicada en un área bien ventilada para evitar el sobrecalentamiento. No obstruya ninguna abertura de ventilación.
- Ambiente: Keep the splitter away from direct sunlight, heat sources, and excessive moisture.
- Sistema de organización de cables: Ensure HDMI cables are not excessively bent or strained, as this can affect signal quality.
- Desconexión de energía: Si la unidad no se utilizará durante un período prolongado, desconéctela de la toma de corriente.
7. Solución de problemas
If you encounter issues with your DVDO 1x4 HDMI Splitter, please refer to the following table for common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| No hay imagen en la(s) pantalla(s) | No power to splitter; Loose HDMI cables; Incorrect input selected on TV; HDCP issue. | Check power connection and adapter. Ensure all HDMI cables are securely connected. Select the correct HDMI input on your display. Power cycle all devices (source, splitter, displays). |
| Picture flickering or intermittent signal | Cables HDMI de mala calidad; Longitud del cable demasiado larga; Interferencia de señal. | Use high-quality, certified HDMI 2.0b cables. Try shorter HDMI cables if possible. Ensure cables are not near strong electrical interference sources. |
| Sin audio | Audio format not supported by display; Loose HDMI cable. | Verify your display supports the audio format being sent. Check HDMI cable connections. |
| One display works, others do not | Faulty HDMI cable to specific display; Display compatibility issue. | Swap HDMI cables to isolate the issue. Check if the non-working display supports the resolution/refresh rate. Try connecting only the problematic display to an output. |
| 4K signal not displayed correctly | Display does not support 4K@60Hz 4:4:4; HDMI cable not rated for 4K. | Ensure your display supports the full 4K@60Hz 4:4:4 specification. Use Premium High-Speed HDMI cables. |
If the problem persists after trying these solutions, please contact DVDO customer support for further assistance.
8. Especificaciones
Detailed technical specifications for the DVDO 1x4 HDMI Splitter:
| Característica | Especificación |
|---|---|
| Modelo | DVDO-Splitter-14 |
| Cumplimiento de HDMI | HDMI 2.0b |
| Cumplimiento de HDCP | HDCP 2.2 |
| Ancho de banda de vídeo | 18 Gbps |
| Resoluciones admitidas | Up to 4K@60Hz (4:4:4 Chroma Subsampabadejo) |
| Profundidad de color | 8 bits, 10 bits, 12 bits |
| Compatibilidad con HDR | Sí |
| Soporte 3D | Sí |
| Formatos de audio | PCM, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS:X |
| Puertos de entrada | 1 x HDMI tipo A |
| Puertos de salida | 4 x HDMI tipo A |
| Fuente de alimentación | 5 V CC |
| Dimensiones (L x An x Al) | 7.64 x 6.22 x 1.89 pulgadas (aprox.) |
| Peso | 1.2 libras (aprox.) |
| Color | Negro |
9. Garantía y soporte
DVDO products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary by region and purchase date. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact DVDO customer service through the official DVDO website or your point of purchase. You may also find additional resources and FAQs on the DVDO support page.
Soporte en línea: Visit the official DVDO webSitio para recursos de soporte.
Información del contacto: Refer to your product packaging or the DVDO webSitio para obtener los datos de contacto más actualizados.
