Manual del usuario del conmutador Gigabit Ethernet L3 administrado Hewlett Packard Enterprise Aruba 6000 12G Class4 PoE 2G/2SFP de 139 W

1. Introducción

This manual provides essential information for the installation, operation, and maintenance of your Hewlett Packard Enterprise Aruba 6000 12G Class4 PoE 2G/2SFP 139W Managed L3 Gigabit Ethernet Switch. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

2. Información de seguridad

Tenga en cuenta las siguientes precauciones de seguridad para evitar daños al dispositivo o lesiones al personal:

• Asegúrese de que haya una conexión a tierra adecuada antes de conectar la alimentación.
• Do not operate the device in environments exceeding 40 degrees Celsius.
• Utilice únicamente el adaptador de corriente y los cables especificados.
• Evite bloquear las aberturas de ventilación para evitar el sobrecalentamiento.
• No intente abrir ni reparar el dispositivo usted mismo. Encargue cualquier reparación a personal cualificado.

3. Contenido del paquete

Verifique que su paquete contenga los siguientes elementos:

• Hewlett Packard Enterprise Aruba 6000 Switch (Model R8N89A)
• Cable de alimentación
• Kit de montaje en bastidor (si corresponde)
• Documentación (Guía de inicio rápido, Información de seguridad)

4. Producto terminadoview

4.1 Disposición del panel frontal

The front panel of the Aruba 6000 switch provides various ports and LED indicators for network connectivity and status monitoring.

Image: Front panel of the HPE Aruba 6000 switch, showing various ports and LED indicators.

Componentes del panel frontal:

• PoE1 Indicator: Indicates Power over Ethernet status for the device.
• R8N89A Label: Product model number and electrical specifications (57Vmax | 0.3A).
• 2p 1G SFP Ports (15, 16): Two 1 Gigabit Small Form-Factor Pluggable ports for fiber optic connections.
• 2p 1G BASE-T Ports (13, 14): Two 1 Gigabit Ethernet ports for copper connections.
• 12p 1G BASE-T Ports (1A-12): Twelve 1 Gigabit Ethernet ports for copper connections.
• UID (Unit Identification) LED: Helps locate the switch in a rack.
• Spd (Speed) LED: Indicates port speed status.
• PoE (Power over Ethernet) LED: Indicates PoE status for individual ports.
• Puerto auxiliar: Auxiliary USB port.
• Botón de modo LED: Toggles LED display modes.
• Puerto de consola: USB-C console port for local management.
• Botón de reinicio: Resets the device to factory defaults or reboots.

4.2 Indicadores LED

Los LED del panel frontal proporcionan el estado visual del funcionamiento del interruptor:

• Spd LED:
  • Flashing: Not maximum speed.
  • Solid: Maximum speed.
• LED PoE:
  • Flashing: Fault/Over budget.
  • Solid: PoE enabled.

5. Configuración

5.1 Instalación física

1. Montaje en bastidor: Secure the switch in a standard 19-inch equipment rack using the provided rack mount kit. Ensure adequate space for airflow around the device.
2. Conexión de energía: Connect the power cord to the switch's power inlet and then to a grounded AC power outlet.
3. Conexiones de red: Connect network cables (Ethernet or fiber) to the appropriate ports on the front panel.

5.2 Configuración inicial

1. Acceso a la consola: Connect a computer to the switch's console port using a USB-C cable. Use a terminal emulation program (e.g., PuTTY, Tera Term) with the following settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
2. Acceso: Follow the on-screen prompts to log in. Default credentials are typically provided in the Quick Start Guide.
3. Configuración básica: Configure essential network parameters such as IP address, subnet mask, and default gateway.

6. Instrucciones de funcionamiento

Once the switch is physically installed and initially configured, it will begin forwarding network traffic. For advanced configurations and management, refer to the comprehensive software configuration guide available on the Hewlett Packard Enterprise support websitio.

• Funcionalidad PoE: The switch automatically detects and powers PoE-compatible devices connected to its PoE-enabled ports. Monitor PoE status via the front panel LEDs.
• Características de la capa 3: As a Managed L3 switch, it supports advanced routing and network segmentation features. These are configured via the command-line interface (CLI) or webinterfaz de gestión basada en.

7. Mantenimiento

• Limpieza: Periodically clean the exterior of the switch with a soft, dry cloth. Ensure ventilation openings are free from dust and debris.
• Actualizaciones de firmware: Consulte periódicamente el soporte de Hewlett Packard Enterprise website for firmware updates. Keeping the firmware current ensures optimal performance and security.
• Copia de seguridad de configuración: Regularly back up your switch configuration to an external storage device or network location.

8. Solución de problemas

If you encounter issues with your switch, consider the following troubleshooting steps:

• Sin energía: Verify the power cord is securely connected and the power outlet is functional. Check the power LED on the switch.
• Sin conectividad de red: Check cable connections, port LEDs (Spd and PoE), and ensure correct network configuration.
• El dispositivo PoE no se enciende: Verify the device is PoE-compatible. Check the PoE LED for faults or over-budget conditions. Ensure the switch's PoE budget is not exceeded.
• Rendimiento lento: Check for network congestion, cable quality, and port speed settings. Refer to the Spd LED.
• Restablecimiento de fábrica: If all else fails, press and hold the Reset button for a specified duration (refer to the Quick Start Guide for exact timing) to restore factory default settings. This will erase all configurations.

9. Especificaciones

10. Garantía y soporte

For warranty information, technical support, and additional resources, please visit the official Hewlett Packard Enterprise support website or contact their customer service. Keep your purchase receipt and product serial number handy for any support inquiries.

Hewlett Packard Enterprise Support: www.hpe.com/us/en/support.html