1. Introducción
The Fanvil PA2S is an advanced IP SIP Paging Gateway designed for robust media streaming using standard IP/RTP/RTSP protocols. This versatile device integrates multiple functionalities including broadcast, recording, intercom, and security features, making it suitable for various deployment scenarios. Its compact design facilitates integration into diverse solutions.
2. Información de seguridad
Please read these safety instructions carefully before using the Fanvil PA2S. Failure to follow these guidelines may result in electric shock, fire, or damage to the device.
- Fuente de alimentación: Use only the specified power adapter (12V-24V DC) or a compliant Power over Ethernet (PoE) source. Ensure the power source matches the device's requirements.
- Ambiente: Operate the device in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture. Avoid extreme temperatures.
- Manejo: Do not drop, disassemble, or attempt to repair the device yourself. Refer all servicing to qualified personnel.
- cables: Ensure all cables are securely connected and not damaged. Do not route cables where they can be tripped over or damaged.
3. Contenido del paquete
Verifique que todos los artículos estén presentes en su paquete:
- Fanvil PA2S Unit
- Power Adapter (may vary by region/bundle, if not using PoE)
- Accesorios de montaje (tornillos, soportes)
- Guía de instalación rápida (este manual)
4. Producto terminadoview
The Fanvil PA2S features a compact design with various interfaces for connectivity and control.
4.1 Disposición del dispositivo
Figura 1: Frente view of the Fanvil PA2S, showing various input/output terminals and power input.
Figura 2: Angular view of the Fanvil PA2S, highlighting the network ports on the side.
4.2 Características principales
- Emergency button interface for active calls.
- Adaptive 10/100 Mbps network port with built-in Power over Ethernet (PoE).
- NVR video recording support via standard RJ45 interface.
- Recording output with a 3.5 mm standard audio interface.
- Audio output port for connecting an expandable external active speaker.
- One switching signal input and output (built-in relay).
- Potencia de canal mono Amplifier Output (10W~30W), adjustable based on input voltage.
5. Configuración
Follow these steps to set up your Fanvil PA2S:
- Montaje: Secure the PA2S unit in your desired location using the provided mounting accessories. Ensure adequate ventilation.
- Conexión de red: Connect an Ethernet cable from your network switch or router to the RJ45 network port on the PA2S. If using PoE, this single cable will also provide power.
- Conexión de alimentación (si no utiliza PoE): If PoE is not available, connect a 12V-24V DC power adapter to the power input port on the PA2S.
- Salida de audio: Connect external speakers to the "SPK LINE OUT" terminals or an active speaker to the 3.5mm audio output port.
- Entrada de micrófono: Connect a microphone to the "MIC" terminals if required for intercom or recording.
- Logic Input/Output: Connect external devices for security triggers or control via the "LOGIC IN/OUT" terminals as per your system design.
- Configuración: Accede al dispositivo web interface via its IP address (refer to your network's DHCP server or use a network scanner to find it) to configure SIP accounts, paging zones, and other settings.
6. Instrucciones de funcionamiento
The Fanvil PA2S operates as a SIP endpoint, integrating with your existing IP PBX or SIP server to provide various communication and security functions.
- Paging/Broadcast: Initiate a page or broadcast by dialing the configured extension of the PA2S from a SIP phone. The audio will be streamed to connected speakers.
- Intercomunicador: Utilize the microphone input and speaker output for two-way audio communication when configured as an intercom endpoint.
- Grabación: The device supports recording output via its 3.5mm interface, allowing integration with external recording systems.
- Funciones de seguridad: The logic input/output and emergency button interface enable integration with security systems for trigger events and active calls.
- Control de volumen: Adjust output volume through the device's web interface or connected SIP phone controls, if supported.
7. Mantenimiento
Regular maintenance ensures optimal performance and longevity of your Fanvil PA2S.
- Limpieza: Utilice un paño suave y seco para limpiar el exterior del dispositivo. No utilice limpiadores líquidos ni aerosoles.
- Actualizaciones de firmware: Consulte periódicamente el sitio oficial de Fanvil webSitio para actualizaciones de firmware. Actualizar el firmware puede mejorar el rendimiento, añadir nuevas funciones y corregir errores. Siga atentamente las instrucciones proporcionadas con la actualización.
- Controles ambientales: Asegúrese de que el entorno operativo permanezca dentro de los rangos de temperatura y humedad recomendados.
8. Solución de problemas
If you encounter issues with your Fanvil PA2S, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| No Power/Device not turning on | Incorrect power adapter; PoE not active; faulty cable. | Verify power adapter (12V-24V DC) or PoE switch functionality. Check power and Ethernet cable connections. |
| Sin conectividad de red | Faulty Ethernet cable; incorrect network settings; switch port issue. | Check Ethernet cable. Verify network settings (IP address, subnet mask, gateway) in the device's web interface. Ensure the network switch port is active. |
| Sin salida de audio | Speakers not connected; incorrect volume settings; audio output disabled. | Ensure speakers are correctly wired to "SPK LINE OUT" or active speaker to 3.5mm port. Check volume settings in the web interface. Confirm audio output is enabled. |
| Cannot register to SIP server | Incorrect SIP account details; network firewall blocking SIP ports; server issues. | Verify SIP server address, port, username, and password. Check firewall rules. Contact your SIP service provider or IT administrator. |
9. Especificaciones
| Característica | Detalle |
|---|---|
| Marca | Villa de abanico |
| Número de modelo | PA2S |
| Peso del artículo | 11.3 onzas (aprox. 320 g) |
| Dimensiones del producto (LxAnxAl) | 5.91 x 78.74 x 5.91 inches (Note: The length of 78.74 inches appears to be a data error and is unusually long for this type of device.) |
| Interfaz de red | 10/100 Mbps Ethernet, Adaptive, Built-in PoE |
| Entrada de potencia | 12V-24V DC or PoE |
| Potencia de salida de audio | 10W~30W Mono Channel (adjustable by input voltage) |
| Interfaces de audio | SPK Line Out, 3.5mm Recording Output, 3.5mm Audio Output Port, MIC Input |
| Interfaces de control | LED, Key, Logic In/Out, Emergency Button |
10. Garantía y soporte
For warranty information, technical support, or service inquiries regarding your Fanvil PA2S, please contact Fanvil customer support directly or visit their official webSitio. Conserve su recibo de compra como comprobante de compra.
Oficial de Fanvil Websitio: www.fanvil.com
