Turbo Racing P30 2.4G RC Car Transmitter and Receiver Set

1. Introducción

Gracias por la compraasing the Turbo Racing P30 2.4G RC Car Transmitter and Receiver Set. This product is designed for precise control of RC cars and boats, offering reliable performance and a detachable design for convenient storage. This manual provides essential information for safe and effective use of your new device.

This Turbo Racing product is a technically certified genuine product, ensuring compliance with radio wave laws for your peace of mind. (Compliance certification number: 214-112920)

2. Precauciones de seguridad

• Always operate the transmitter in a safe environment, away from people, animals, and obstacles.
• Ensure the batteries are inserted with correct polarity. Incorrect battery insertion can damage the device.
• Do not expose the transmitter or receiver to water or extreme temperatures, unless specified for the waterproof receiver.
• Mantenga el dispositivo fuera del alcance de los niños pequeños.
• If the device does not power on or function correctly, first check battery installation and connections before attempting further troubleshooting.

3. Contenido del paquete

Al abrir su paquete, verifique que todos los siguientes elementos estén incluidos:

• 1x Turbo Racing P30 Transmitter
• 1x 4CH RX41 Waterproof Receiver

Image: The Turbo Racing P30 transmitter shown alongside the compact RX41 waterproof receiver, illustrating the complete set.

4. Producto terminadoview

4.1. Características del transmisor

• 3-Channel Control (CH1, CH2, CH3)
• Detachable Grip for Easy Storage
• D/R (Dual Rate) Function for Throttle and Steering
• Función REV (inversa)
• TRIM Function for Fine Adjustments
• Función a prueba de fallas
• Vol bajotage Warning (below 4.5V)

Imagen: Un detalle view of the control panel on the Turbo Racing P30 transmitter, showing the CH3 button, TRIM dials, D/R buttons for steering (ST) and throttle (TH), REV button, and the ON/OFF switch.

4.2. Características del receptor

• 4-Channel (RX41)
• Diseño a prueba de agua
• 2.4G Frecuencia

Image: A close-up of the Turbo Racing RX41 waterproof receiver, highlighting its compact size and connection ports. The label indicates "4ch Receiver 2.4G Waterproof".

5. Configuración

5.1. Instalación de las baterías del transmisor

1. Locate the battery compartment on the bottom of the transmitter grip.
2. Abra la tapa de la batería.
3. Insert four (4) 1.5V AAA batteries (sold separately) into the compartment, ensuring correct polarity (+/-).
4. Cierre bien la tapa de la batería.

5.2. Attaching the Detachable Grip

The transmitter features a detachable grip for easier storage. To attach the grip:

1. Align the grip with the main body of the transmitter.
2. Slide the grip firmly into place until it clicks, ensuring a secure connection.

Image: The Turbo Racing P30 transmitter with its grip detached, demonstrating the modular design for compact storage.

5.3. Conexión del receptor

Connect the RX41 receiver to your RC car or boat's electronic speed controller (ESC) and steering servo according to your vehicle's instructions. Ensure the channels are connected correctly (e.g., CH1 for steering, CH2 for throttle).

6. Instrucciones de funcionamiento

6.1. Encendido / apagado

1. Ensure the transmitter batteries are installed and the grip is securely attached.
2. Turn on the transmitter using the ON/OFF switch located on the control panel.
3. Power on your RC vehicle. The transmitter and receiver should automatically bind.
4. To power off, first turn off your RC vehicle, then turn off the transmitter.

6.2. Control básico

• Volante: Rotate the steering wheel left or right to control the direction of your RC vehicle.
• Gatillo del acelerador: Aprieta el gatillo para acelerar. Empújalo en dirección contraria para frenar o dar marcha atrás.

Imagen: Una vista aérea view of the Turbo Racing P30 transmitter, showing the ergonomic design and the placement of the steering wheel and throttle trigger.

7. Ajustes

7.1. D/R (Dual Rate) Function

The D/R function allows you to adjust the maximum steering angle and throttle output. This is useful for tailoring the vehicle's response to different driving conditions or skill levels.

• Utilice el DR ST buttons to adjust steering dual rate.
• Utilice el DR TH buttons to adjust throttle dual rate.

7.2. TRIM Function

Trim adjustments are used to fine-tune the neutral position of the steering and throttle channels, ensuring the vehicle tracks straight and remains stationary when the controls are at rest.

• Utilice el TRIM ST buttons to adjust steering trim.
• Utilice el TRIM TH buttons to adjust throttle trim.

7.3. REV (Reverse) Function

The REV function reverses the direction of a channel's output. This is typically used to correct the steering or throttle direction if it's opposite to what is desired.

• Presione el RDO button to reverse the steering or throttle channel.

8. Función de seguridad

The Fail-Safe function is a safety feature that automatically sets the throttle to a neutral or brake position if the signal between the transmitter and receiver is lost. This prevents the RC vehicle from running out of control.

• The P30 transmitter and RX41 receiver are equipped with a Fail-Safe function.
• Refer to your RC vehicle's ESC manual for specific Fail-Safe setup procedures, if applicable.

9. Mantenimiento

• Clean the transmitter and receiver with a soft, dry cloth. Do not use solvents or harsh chemicals.
• Retire las baterías del transmisor si no lo utilizará durante un período prolongado para evitar fugas.
• Guarde el dispositivo en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.

10. Solución de problemas

11. Especificaciones

12. Garantía y soporte

For warranty information and customer support, please refer to the official Turbo Racing webSitio web o contacte a su vendedor. Conserve su recibo de compra como comprobante.

Para obtener recursos adicionales y actualizaciones de productos, visite Tienda ARRISHOBBY en Amazon.