Introducción
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Paulmann 93096 Calla LED Recessed Spotlights Kit. This kit includes three versatile, matte black LED spotlights designed for various indoor environments, including damp rooms, thanks to their IP65 splash protection. Key features include the White Switch function for adjustable color temperature and an integrated memory function.
Please read these instructions carefully before installation and use to ensure safe and optimal performance of your Paulmann Calla LED spotlights. Keep this manual for future reference.
Image: Paulmann 93096 Calla LED Recessed Spotlights Kit, showing the product packaging and a single spotlight unit.
1. Configuración e instalación
Before beginning installation, ensure the main power supply is switched off at the circuit breaker to prevent electrical shock. Installation should be performed by a qualified electrician if you are unsure.
1.1 Herramientas necesarias (no incluidas)
- Hole saw (68 mm diameter)
- Destornillador
- Pelacables
- Volumentage probador
1.2 pasos de instalación
- Prepare el orificio de montaje: Using a 68 mm diameter hole saw, cut a circular opening in the ceiling or mounting surface. Ensure the cavity depth is at least 40 mm, with an installation depth of 55 mm required for the fixture.
- Conexión eléctrica: Open the connection box attached to each spotlight. Connect the main power supply wires (Live 'L' and Neutral 'N') to the corresponding terminals within the connection box. Ensure all connections are secure.
- Asegure el foco de atención: Fold back the spring clips on the sides of the spotlight fixture. Insert the spotlight into the prepared hole. The spring clips will automatically secure the fixture in place against the ceiling.
- Repeat for all spotlights: Follow these steps for each of the three spotlights in the kit.
- Restaurar energía: Una vez que todos los focos estén instalados y cableados de forma segura, restablezca la energía en el disyuntor.
Image: Detailed installation diagram illustrating the required hole diameter (68mm), fixture diameter (90mm), minimum cavity depth (40mm), and total installation depth (55mm).
Imagen: Primer plano view of the electrical connection box, showing the 'L' (Live) and 'N' (Neutral) terminals for wiring.
Image: A set of three Paulmann Calla LED spotlights, each connected to its individual wiring box, ready for installation.
Important: Ensure proper IP65 rating is maintained, especially in damp environments like bathrooms. The IP65 rating protects against dust ingress and low-pressure water jets from any direction.
Image: Diagram illustrating various IP protection zones within a bathroom, indicating where IP65 and IP67 rated fixtures are suitable. The Paulmann Calla spotlights are IP65 rated.
2. Instrucciones de funcionamiento
2.1 White Switch Function (Color Temperature Adjustment)
The Paulmann Calla spotlights feature a "White Switch" function, allowing you to cycle through different color temperatures using your standard wall light switch.
- To Change Color Temperature: Turn the light switch OFF and then immediately ON again. Each quick toggle will cycle the spotlight through the available color temperatures:
- Warm White (3000K) - For a relaxing atmosphere.
- Neutral White (4000K) - For general illumination and tasks.
- Daylight White (6500K) - For bright, invigorating light.
- Función de memoria: The integrated memory function will save the last selected color temperature if the light remains ON for more than 5 seconds. The next time you turn the light on, it will recall the previously set color.
Image: Illustration of the White Switch function, displaying the three distinct color temperatures (Warm White, Neutral White, Daylight White) available from the spotlights.
Image: A visual representation of the color temperature zones within the spotlight, indicating the transition between warm and cool light.
2.2 Adjusting Spotlight Angle
The Calla spotlights are orientable, allowing you to direct the light beam precisely where needed. Gently tilt the inner light module to adjust the angle of illumination.
Image: Close-up of a single Paulmann Calla LED spotlight, demonstrating its ability to be angled to direct light.
3. Mantenimiento
- Limpieza: To clean the spotlights, ensure the power is off. Use a soft, dry, or slightly damp Paño. No utilice limpiadores abrasivos ni disolventes, ya que pueden dañar el acabado o los componentes eléctricos.
- Vida útil LED: The integrated LED light sources are designed for a long operational life. The LEDs are not replaceable. If an LED fails, the entire fixture must be replaced.
- Inspección: Periodically inspect the spotlights for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
4. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Spotlight does not illuminate. | Sin suministro de energía; cableado suelto; artefacto defectuoso. | Check circuit breaker. Verify wiring connections in the junction box. If problem persists, contact support. |
| White Switch function not working. | Switching too slowly; memory function active. | Ensure quick OFF/ON toggles. If a color was set for >5 seconds, it will be recalled. Try multiple quick toggles. |
| La luz parpadea o se atenúa inesperadamente. | Fuente de alimentación inestable; conexión suelta; regulador de intensidad incompatible (si corresponde). | Check power supply stability. Verify all wiring connections. These spotlights are not explicitly stated as dimmable, avoid using with non-compatible dimmers. |
5. Especificaciones
| Característica | Detalle |
|---|---|
| Marca | Paulman |
| Número de modelo | 93096 |
| Dimensiones del producto (L x An x Al) | 9 x 9 x 5.5 cm |
| Peso | 480 g (for the kit) |
| Clasificación de protección de entrada (IP) | IP65 (hermético al polvo, protegido contra chorros de agua) |
| Número de focos | 3 |
| Estilo | Moderno |
| Color | Negro mate |
| Forma | Redondo |
| Material | Plástico |
| Volumentage | 230 voltios |
| Usos específicos | Hallway, Bathroom (damp áreas) |
| Características especiales | White Switch (adjustable color temperature), Orientable |
| Tipo de fuente de luz | LED integrado |
| Flujo luminoso (por foco) | 550 lúmenes |
| Power (per spotlight) | 5.5 Watts (Total 16.5 Watts for 3) |
| Incandescent Equivalent (per spotlight) | 48 vatios |
| Índice de reproducción cromática (IRC) | 80 |
| Rango de temperatura de color | 3000 K (blanco cálido), 4000 K (blanco neutro), 6500 K (blanco luz diurna) |
| Clase de eficiencia energética | F |
| Tipo de montaje | Empotrable (techo) |
| Diámetro del orificio requerido | 68 milímetros |
| Profundidad mínima de la cavidad | 40 milímetros |
| Profundidad de instalación | 55 milímetros |
6. Información de garantía
Paulmann provides a 5 año de garantía on this product. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, or unauthorized modifications.
Image: The Paulmann 5-year warranty logo, as seen on the product's installation diagram.
7. Soporte y contacto
For further assistance, technical support, or warranty claims, please contact Paulmann customer service. Refer to the official Paulmann websitio o el embalaje del producto para obtener la información de contacto más actualizada.
Paulman Websitio: www.paulmann.es
