Manuales+

WORKPRO W125163AE

Manual de instrucciones de la pulidora WORKPRO

Modelo: W125163AE

Marca: WORKPRO

1. Introducción

Thank you for choosing the WORKPRO 6-inch 1080W Dual Action Random Orbital Polisher. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new polisher. Please read this manual thoroughly before first use and keep it for future reference. This tool is designed for various polishing and waxing applications, including car detailing, floor polishing, and metal polishing.

2. Información de seguridad

Siga siempre las precauciones básicas de seguridad al utilizar aparatos eléctricos para reducir el riesgo de incendio, descarga eléctrica y lesiones personales.

  • Use equipo de protección personal adecuado, incluidas gafas de seguridad y guantes.
  • Asegúrese de que el área de trabajo esté limpia, bien iluminada y libre de obstrucciones.
  • Do not operate the polisher in damp o condiciones húmedas.
  • Mantenga a los niños y transeúntes alejados mientras opera la herramienta.
  • Unplug the polisher from the power source before making any adjustments, changing accessories, or performing maintenance.
  • Do not force the tool; use the correct speed and pressure for the application.
  • Inspeccione el cable de alimentación en busca de daños antes de cada uso.

3. Contenido del paquete

Verifique que todos los artículos enumerados a continuación estén incluidos en su paquete. Si falta algún artículo o está dañado, comuníquese con atención al cliente.

  • 1 × Polisher Machine
  • 1 × Auxiliary Handle
  • 1 × Backing Pad
  • 1 × Woolen Buffer Pad
  • 6 × Foam Pads (various types for different applications)
  • 2 × Replaceable Carbon Brushes
  • 1 × Hex Key
  • 3 × Hex Head Bolts
  • 1 × Towel
Image showing all components included in the WORKPRO Buffer Polisher kit: the polisher machine, backing pad, hex key, auxiliary handle, foam pads, woolen buffer pad, carbon brushes, hex head bolts, and a towel.

Figura 3.1: Componentes incluidos

4. Características del producto

The WORKPRO Buffer Polisher is engineered for efficiency and user comfort.

  • 6 Control de velocidad variable: Adjust speeds from 1400-5000 RPM to match project requirements, allowing for precise control during waxing and polishing.
    Detallado view of the WORKPRO polisher highlighting its parts including grip hood, auxiliary handle, speed adjustor, lock on button, carbon brush cover, backing pad, and on/off trigger.

    Figure 4.1: Polisher Components Overview

  • Motor de alto rendimiento: Equipado con un motor de 9 litros. amp, 1080 watt motor and 15mm dual action orbital motion for powerful and efficient operation. Heat-resistant copper wire ensures longer working time.
    Image illustrating the internal powerful 9A motor of the WORKPRO polisher, highlighting its 5000 RPM capability, low noise, and heavy-duty project suitability.

    Figure 4.2: High-Performance Motor

  • Diseño ergonómico: Features a comfortable grip hood and an auxiliary handle for non-slip control. The switch-locking mechanism reduces hand fatigue during extended use.
    Image illustrating the ergonomic design of the WORKPRO polisher, showing the comfortable grip and auxiliary handle for better control.

    Figura 4.3: Diseño ergonómico

  • Dual Action Orbital Motion: Provides high security and allows for polishing without glare, ensuring a smooth and even finish.
    Diagram illustrating the 15mm dual action orbital motion of the polisher, designed for high security and glare-free polishing.

    Figure 4.4: Dual Action Mechanism

5. Configuración

  1. Coloque el mango auxiliar: Secure the auxiliary handle to the polisher using the provided hex head bolts and hex key. Ensure it is firmly tightened for safe operation.
  2. Install the Backing Pad: Align the backing pad with the spindle on the polisher and screw it on securely.
  3. Attach Polishing Pads: The foam pads and woolen buffer pad attach to the backing pad via hook-and-loop fasteners. Select the appropriate pad for your task (e.g., foam pads for compounding/polishing, woolen pad for buffing).
The WORKPRO Buffer Polisher with its auxiliary handle attached and a foam pad on the backing plate, ready for use.

Figure 5.1: Polisher Setup

6. Instrucciones de funcionamiento

This section details the proper use of your WORKPRO Buffer Polisher for various applications.

  1. Encendido/apagado: Plug the polisher into a suitable power outlet. Press the On/Off trigger to start the tool.
  2. Using the Switch Locking Mechanism: For continuous operation, press the lock button located near the trigger after starting the polisher. This will keep the tool running without needing to hold the trigger. Press the trigger again to release the lock and stop the tool.
    Close-up image of the polisher's handle showing the trigger and the green lock button for continuous operation.

    Figure 6.1: Trigger and Lock Button

  3. Ajuste de velocidad: Use the 6-variable speed adjustor dial to select the desired RPM (1400-5000 RPM). Lower speeds are generally used for waxing and spreading compounds, while higher speeds are for polishing and buffing.
    Close-up image of the green speed dial on the WORKPRO polisher, showing the numerical settings for variable speed control.

    Figure 6.2: Speed Adjustor Dial

  4. Métodos de aplicación: The polisher can be used with either the auxiliary handle for two-handed control or by gripping the main body for single-handed operation, depending on the task and user preference.
    Image showing two different grip methods for the polisher: one with the auxiliary handle for two-handed control (Method 1) and another gripping the main body for single-handed use (Method 2).

    Figura 6.3: Métodos de control múltiples

  5. Uso general: Apply a small amount of compound or wax directly to the pad or the surface. Start the polisher at a low speed to spread the product, then increase speed as needed for polishing or buffing. Maintain even pressure and move the polisher in overlapping passes.
    Collage of images demonstrating the wide range of applications for the WORKPRO polisher, including car waxing, wood polishing, tile polishing, and general car polishing.

    Figura 6.4: Amplia gama de aplicaciones

Video 6.1: WORKPRO Dual Action Buffer Polisher Kit in action, demonstrating variable speed control, switch locking mechanism, and various polishing applications on cars, tiles, and wood.

7. Mantenimiento

El mantenimiento regular garantiza la longevidad y el rendimiento óptimo de su pulidora.

  • Limpieza: After each use, wipe down the polisher with a clean, dry cloth. Remove any residue from the backing pad and ensure ventilation slots are clear.
    Close-up image of the polisher's air vents, indicating the importance of keeping them clear for proper ventilation and cooling.

    Figure 7.1: Ventilation Slots

  • Reemplazo de escobillas de carbón: The carbon brushes are wear items and will need periodic replacement. When the tool's performance decreases or it stops working, check the carbon brushes. To replace, unscrew the carbon brush covers on the side of the motor housing, remove the old brushes, and insert new ones. Ensure the brushes are seated correctly before replacing the covers.
    Close-up image showing a hand using a screwdriver to open the carbon brush cover on the polisher, indicating the process for carbon brush replacement.

    Figure 7.2: Carbon Brush Replacement

  • Cuidado de la almohadilla: Clean polishing pads thoroughly after each use to remove product residue. This prolongs their life and maintains polishing effectiveness.

8. Solución de problemas

ProblemaPosible causaSolución
La pulidora no arranca.Sin fuente de alimentación; cable dañado; escobillas de carbón desgastadas.Check power connection; inspect cord for damage; replace carbon brushes.
Reduced power or erratic operation.Worn carbon brushes; motor overheating; excessive pressure.Replace carbon brushes; allow tool to cool; reduce pressure.
Vibración o ruido excesivo.Loose backing pad; damaged pad; internal component issue.Tighten backing pad; replace damaged pad; contact customer support.
Malos resultados de pulido.Incorrect pad type; insufficient product; improper technique.Use appropriate pad; apply sufficient product; review Instrucciones de funcionamiento.

9. Especificaciones

AtributoValor
Número de modeloW125163AE
Fuente de poderEléctrico con cable
Volumentage12 voltios
Ampanhelo9 Amps
Quétage1080 vatios
Velocidad1400-5000 RPM (Variable)
Peso del artículo7.41 libras (3.37 kilogramos)
Dimensiones del paquete16.97 x 7.6 x 6.69 pulgadas
MaterialMetal, Plástico
ColorGris, negro

10. Garantía y soporte

WORKPRO products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official WORKPRO websitio.

For technical support, replacement parts, or any inquiries regarding your WORKPRO Buffer Polisher, please contact WORKPRO customer service. Contact information can typically be found on the product packaging or the official WORKPRO websitio.

You can also visit the WORKPRO Store on Amazon for more information and products: Tienda de Amazon WORKPRO.