SHEHDS DMX Controller DMX384 Instruction Manual

1. Introducción

This manual provides detailed instructions for the proper setup, operation, and maintenance of your SHEHDS DMX384 DJ Controller. Please read this manual thoroughly before operating the device to ensure safe and efficient use. Retain this manual for future reference.

2. Información de seguridad

• Siempre conecte el dispositivo a una toma de corriente con conexión a tierra.
• Asegúrese de que la fuente de alimentación voltage coincide con los requisitos del dispositivo.
• No exponga el dispositivo a la lluvia ni a la humedad.
• Evite utilizar el dispositivo en temperaturas extremas o en condiciones de alta humedad.
• No abra la casing; delegue cualquier servicio a personal calificado.
• Mantenga el dispositivo alejado de materiales inflamables.

3. Producto terminadoview

The SHEHDS DMX384 is an intelligent lighting controller designed for managing DMX-compatible stage lighting equipment. It features 384 control channels, allowing for comprehensive control over multiple fixtures.

3.1 Controles del panel frontal

Figura 1: Frente view of the SHEHDS DMX384 DJ Controller, displaying the array of faders and control buttons for various functions.

Figure 2: Close-up of the control panel, highlighting the LED digital display, channel faders, and function buttons for scene and program selection.

El panel frontal incluye:

• Área de iluminación: Controls for individual light fixtures.
• Channel Faders (1-16): Adjust DMX channel values.
• Time Speed Faders: Control fade time and speed for scenes and chases.
• Functional Area: Buttons for program, scene, and bank selection.
• Claves de escena: Activate stored scenes.
• Page Change Area: Navigate between different pages of channels (A/B).
• Pantalla LCD: Muestra la configuración y valores actuales.

3.2 Conexiones del panel posterior

Figure 3: Rear panel of the DMX384 Controller, showing all connection ports.

Figura 4: detallada view of the DMX 512 output, DC input, and USB port on the rear panel.

El panel trasero incluye:

• Entrada/Salida MIDI: For MIDI control (if applicable).
• DMX 512 Output: Standard 3-pin XLR connector for DMX signal output.
• DC Input (9V 1000mA): Entrada de energía para el controlador.
• Puerto USB: For potential firmware updates or data transfer (refer to specific software instructions).
• Interruptor de alimentación: On/Off control for the device.

4. Configuración

4.1 Desembalaje

Figure 5: Contents of the SHEHDS DMX384 Controller package.

Retire con cuidado todos los componentes del embalaje. Compruebe que estén todos los elementos:

• SHEHDS DMX384 Controller
• Adaptador de corriente (9 V 1000 mA)
• Manual de usuario

4.2 Conexión de alimentación

1. Connect the provided power adapter to the DC Input port on the rear panel of the DMX384 controller.
2. Plug the power adapter into a suitable electrical outlet (9V 1000mA).
3. Ensure the power switch on the rear panel is in the 'OFF' position before connecting.

4.3 Conexión DMX

1. Use a standard 3-pin DMX cable to connect the DMX 512 Output of the controller to the DMX Input of your first lighting fixture.
2. For multiple fixtures, daisy-chain them by connecting the DMX Output of the first fixture to the DMX Input of the second, and so on.
3. Ensure the last fixture in the chain has a DMX terminator connected to its DMX Output to prevent signal reflection.

5. Instrucciones de funcionamiento

The DMX384 controller provides 384 DMX channels, capable of controlling up to 12 intelligent computer lights, each with 32 channels. It supports 30 bar stacks with 8 scenes each, and 6 slots with up to 240 scenes. Scenes can be recorded with fading and sensitivity settings. The 16 sliders allow direct control of channels, and a built-in amplifier supports music mode operation.

5.1 Encendido e inicialización

1. Coloque el interruptor de encendido en el panel trasero en la posición “ON”.
2. The LCD display will illuminate, indicating the controller is ready for operation.

5.2 Configuración de direcciones DMX

Before controlling your lighting fixtures, ensure each fixture has a unique DMX address set. Refer to your fixture's manual for specific instructions on setting its DMX address.

Note: After setting the DMX address on the controller, press the 'OK' key. The original DMX address will be retained even after shutting down and restarting the unit.

5.3 Basic Channel Control

1. Select the desired scanner (fixture) using the 'SCANNER' buttons (SCAN 1-12).
2. Use the 16 channel faders to adjust the DMX values for the selected fixture's channels. The LCD display will show the current channel values.
3. Use the 'PAGE SELECT' button to switch between channel pages A (1-16) and B (17-32) if your fixture uses more than 16 channels.

5.4 Scene Programming

The controller allows you to program and store multiple scenes.

1. Press the 'PROGRAM' button to enter programming mode.
2. Select the desired scanner(s) and adjust their channels using the faders to create your desired lighting state.
3. Press the 'MIDI/ADD' button to save the current lighting state.
4. Select a 'SCENE' button (SCENE 1-8) to store the scene.
5. Repita esto para escenas adicionales.
6. Exit programming mode by pressing the 'PROGRAM' button again.

5.5 Scene Playback

1. Ensure the controller is not in programming mode.
2. Press the desired 'SCENE' button to activate a stored scene.
3. Use the 'FADE TIME' fader to adjust the transition speed between scenes.
4. Use the 'SPEED' fader to adjust the speed of dynamic effects within a scene.

5.6 Chase Programming and Playback

Chases are sequences of scenes that play automatically.

1. Press the 'PROGRAM' button.
2. Press the 'CHASE' button (CHASE 1-6) to select a chase to program.
3. Select and activate scenes in the desired order. Each activated scene will be added to the chase.
4. Press 'MIDI/ADD' after each scene to add it to the chase.
5. Exit programming mode by pressing the 'PROGRAM' button.
6. To play a chase, select the desired 'CHASE' button.

5.7 Modo Música

The DMX384 features a built-in amplifier for music mode, allowing lighting to react to audio input.

1. Connect an audio source to the controller's audio input (if available, refer to specific model features).
2. Activate 'MUSIC TRIGGER' mode (refer to LCD display and function buttons).
3. The lighting will now respond to the rhythm and intensity of the music.

6. Mantenimiento

• Limpieza: Utilice un paño suave y seco para limpiar el exterior del mando. No utilice limpiadores abrasivos ni disolventes.
• Almacenamiento: When not in use, store the controller in a dry, dust-free environment.
• Inspección: Revise periódicamente todos los cables y conexiones para detectar desgaste o daños.

7. Solución de problemas

8. Especificaciones

• Modelo: DMX384
• Canales de control: 384 canales DMX
• Accesorios controlables: 12 intelligent computer lights (up to 32 channels each)
• Escenas: 30 banks of 8 programmable scenes (240 total)
• Persecuciones: 6 programmable chases (up to 240 steps each)
• Faders: 16 channel faders, 2 time speed faders
• Mostrar: Pantalla digital LED
• Conectividad: 3-pin DMX output, DC power input, USB port
• Entrada de energía: DC 9V 1000mA (Corded Electric)
• Material: Plastic (housing), Aluminum (internal components/heat sinks)
• Dimensiones (L x An x Al): 24.4" x 8.8" x 5.7" (61.98 cm x 22.35 cm x 14.48 cm)
• Peso: 6.19 libras (2.81 kg)
• Tipo de montaje: Rack Mount (Note: Some users report non-standard 19" rack compatibility, verify before rack installation)

9. Garantía y soporte

SHEHDS se compromete a proporcionar productos de calidad y satisfacción del cliente.

• Política de reemplazo: 1-Month Replacement for manufacturing defects.
• Garantía: 1-Year Limited Warranty from the date of purchase.
• Servicio al cliente: For technical support, warranty claims, or general inquiries, please contact SHEHDS customer service through your retailer or the official SHEHDS websitio.