1. Introducción
The Vento VIVI-DC is a 10-inch wall mount swivel fan designed to enhance airflow in various indoor spaces. Its unique triaxial design and folding arm allow for versatile positioning and efficient air circulation. This manual provides essential information for the safe installation, operation, and maintenance of your VIVI-DC fan.
Figura 1: Frente view of the Vento VIVI-DC fan, showcasing its compact design and walnut finish.
2. Instrucciones de seguridad
Lea atentamente todas las instrucciones de seguridad antes de la instalación y el funcionamiento para evitar lesiones o daños.
- Always unplug the fan from the power source before cleaning, maintenance, or when not in use.
- Do not insert fingers or any objects through the fan guard when the fan is operating.
- Ensure the fan is mounted securely to a wall stud or appropriate anchor points to prevent it from falling.
- This fan is designed for indoor use only. Do not use it outdoors or in wet environments.
- Keep the power cord away from heated surfaces and sharp edges.
- No utilice el ventilador si el cable o el enchufe están dañados. Para obtener ayuda, póngase en contacto con el servicio de atención al cliente.
- Este aparato no está diseñado para ser utilizado por personas (incluidos niños) con capacidades físicas, sensoriales o mentales reducidas, o con falta de experiencia y conocimientos, a menos que hayan recibido supervisión o instrucciones sobre el uso del aparato por parte de una persona responsable de su seguridad.
3. Contenido del paquete
Verifique que todos los componentes estén presentes en el paquete:
- Fan Unit (Shield, Blades, Fan Housing)
- Soporte de montaje
- Mando a distancia
- Remote Transmitter Holder
- Fuente de alimentación DC
- Tirar de la cadena
- Screw Pack (4 x Screws, 4 x Plastic Wall Plugs, 1 x Pull Chain Extension)
- Screws for Transmitter Holder (2 x Screws)
Figura 2: Explosión view showing all included components and accessories for the VIVI-DC fan.
4. Configuración e instalación
Follow these steps for proper installation of your VIVI-DC wall mount fan.
4.1 Herramientas necesarias (no incluidas)
- Perforar
- Destornillador Phillips
- Lápiz
- Cinta métrica
4.2 Montaje del ventilador
- Seleccionar ubicación: Choose a suitable indoor wall location, preferably near a power outlet. Ensure the mounting surface can support the fan's weight (approximately 7 lbs).
- Puntos de perforación de marcado: Hold the mounting bracket against the wall at the desired height. Use a pencil to mark the positions for the four mounting screws.
- Perforar agujeros piloto: Drill pilot holes at the marked positions. If mounting into drywall, insert the plastic wall plugs into the pilot holes.
- Soporte de montaje seguro: Align the mounting bracket with the pilot holes and secure it to the wall using the four screws provided.
- Conecte la unidad del ventilador: Carefully attach the fan unit to the secured mounting bracket. Ensure it clicks or locks into place firmly.
- Conecte la electricidad: Plug the DC power supply into the fan unit and then into a standard wall outlet.
- Install Remote Holder (Optional): Mount the remote transmitter holder to a convenient location using the two smaller screws provided.
Figure 3: Dimensional diagram of the VIVI-DC fan, useful for planning installation space.
5. Operación
The VIVI-DC fan can be controlled using the included remote control or the integrated pull chain.
5.1 control remoto
The remote control allows you to power the fan on/off and adjust its speed settings.
Figure 4: The remote control for the VIVI-DC fan, featuring power and speed adjustment buttons.
- Botón de encendido (⏻): Press once to turn the fan on or off.
- Speed Button (Low Speed): Press to set the fan to low speed.
- Speed Button (High Speed): Press to set the fan to high speed.
5.2 Pull Chain
The pull chain provides an alternative method for basic fan control.
- Pull the chain once to turn the fan on (default to low speed).
- Pull the chain again to switch to high speed.
- Pull the chain a third time to turn the fan off.
5.3 Ajuste del ángulo del ventilador
The VIVI-DC fan features a triaxial design and a swivel arm, allowing you to manually adjust the fan head to direct airflow as needed. Gently pivot the fan head and arm to achieve the desired angle.
6. Mantenimiento
La limpieza regular ayudará a mantener el rendimiento y la apariencia del ventilador.
- Desconecte siempre el ventilador Antes de limpiar.
- Utilice un paño suave y seco.amp Paño para limpiar las superficies exteriores del ventilador. No utilice limpiadores abrasivos ni disolventes.
- To clean the fan blades, carefully remove the front grill (if detachable, refer to assembly diagram for guidance). Wipe the blades with a soft cloth. Ensure all parts are dry before reassembling and operating the fan.
- Do not immerse the fan or any electrical components in water or other liquids.
7. Solución de problemas
If you encounter issues with your VIVI-DC fan, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| El ventilador no enciende | Sin suministro de energía Batería del control remoto agotada | Ensure the DC power supply is securely plugged into the fan and a working outlet. Reemplace la batería del control remoto. |
| Fan is noisy or vibrates excessively | Componentes sueltos Obstrucción en las aspas del ventilador | Ensure the fan unit is securely attached to the mounting bracket. Check for any loose screws. Unplug the fan and carefully remove any debris or obstructions from the blades. |
| El control remoto no funciona | Batería agotada Obstrucción entre el control remoto y el ventilador Control remoto no emparejado (si corresponde) | Reemplace la batería del control remoto. Asegúrese de que haya una línea de visión clara entre el control remoto y el receptor del ventilador. Refer to specific pairing instructions if provided with the remote (not typically required for this model). |
8. Especificaciones
- Modelo: VIVI-DC
- Marca: Viento
- Diámetro del ventilador: 10 pulgadas
- Dimensiones del producto (Pr x An x Al): 10.08" x 12.9" x 14.33"
- Peso del artículo: 7 libras
- Fuente de energía: DC Powered
- Quétage: 12 vatios
- Capacidad de flujo de aire: 268 pies cúbicos por minuto (CFM)
- Nivel de ruido: 48 Decibels (dBa)
- Método de control: Control remoto, cadena de tracción
- Número de niveles de potencia: 2 (bajo, alto)
- Uso en interiores y exteriores: Solo en interiores
- Características especiales: Adjustable Tilt, Remote Controlled, Folding Arm, Energy Efficient DC Motor
9. Garantía y soporte
The Vento VIVI-DC fan comes with the following warranty:
- Motor de corriente continua: 18-month limited manufacturer's warranty.
- Other Fan Parts: 1-year limited manufacturer's warranty.
For warranty claims, technical support, or replacement parts, please contact Vento customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and model number (VIVI-DC) ready when contacting support.
