Manual del usuario del grabador láser ATOMSTACK S20 Pro

Información de seguridad

The ATOMSTACK S20 Pro is a Class 4 laser product. Always wear appropriate laser safety goggles when operating the machine. Never look directly into the laser beam. Ensure the work area is well-ventilated to dissipate fumes. Keep children and pets away from the operating machine.

Always wear laser safety goggles.
Asegurar una ventilación adecuada en el área de trabajo.
Keep clear of the laser path during operation.
No deje la máquina desatendida mientras esté en funcionamiento.
Familiarize yourself with the emergency stop button.

¿Qué hay en la caja?

ATOMSTACK S20 Pro Laser Engraver Unit
F30 Pro Air Assist Kit (with dual built-in pumps)
Adaptador de corriente
Cable USB
Gafas de seguridad
One-step Installation Tools
Manual de usuario
Test Materials (e.g., wood, metal samplos)

Guía de configuración

Follow these steps to assemble and prepare your ATOMSTACK S20 Pro Laser Engraver for first use.

1. Desembalaje y montaje

Carefully remove all components from the packaging. Refer to the included "One-step Installation Tools" for assembly.

ATOMSTACK S20 Pro Laser Engraver components laid out for assembly

Image: All components of the ATOMSTACK S20 Pro Laser Engraver laid out on a table, including the main frame, laser module, air assist pump, control panel, and accessories.

2. Connecting the Air Assist Pump

The F30 Pro Air Assist Kit is designed to improve cutting performance and reduce charring. Connect the air assist tube to the laser module and the pump unit.

Image: A close-up of the ATOMSTACK F30 Pro Air Assist Pump connected to the laser engraver, showing the tube interface and power input.

3. Conexión de alimentación

Connect the power adapter to the control unit and plug it into a suitable power outlet.

4. Laser Module Installation and Focusing

Install the laser module onto the gantry. Use the provided focusing tool or adjustable knob to set the correct focal length (typically 4.5mm from the material surface).

ATOMSTACK S20 Pro laser module with adjustable knob for focusing

Imagen: Un detalle view of the ATOMSTACK S20 Pro laser module, highlighting the adjustable knob used for precise focusing.

Videotutorial de instalación

Video: A step-by-step guide demonstrating the installation process for the ATOMSTACK S20 Pro Laser Engraving Machine.

Instrucciones de funcionamiento

The ATOMSTACK S20 Pro offers multiple operating methods for your convenience.

1. Métodos operativos

USB de la computadora: Connect the engraver to your computer via USB. Compatible with LightBurn and LaserGRBL software.
Pantalla táctil: Utilize the built-in offline control touchscreen for direct operation by inserting a TF card with engraved patterns.
Mobile Phone APP: Use the ATOMSTACK APP (available for Android and Apple) to connect and control the engraver via WiFi.

Three connection methods for ATOMSTACK S20 Pro: Computer USB, Touch Screen, and Mobile Phone APP

Image: An illustration showing the three primary connection and control methods for the ATOMSTACK S20 Pro: via Computer USB, directly through the Touch Screen, or wirelessly using a Mobile Phone APP.

2. Offline Engraving via Touchscreen

To perform offline engraving, ensure your TF card contains the desired engraving patterns. Insert the TF card into the control unit. Select "Carve" from the touchscreen menu, choose your file, and initiate the engraving process.

Video: A demonstration of how to achieve offline engraving using the touchscreen interface of the ATOMSTACK S20 Pro.

3. Mobile Phone APP Connection

Download the ATOMSTACK APP from your phone's app store. Connect your mobile phone to the engraver's WiFi network (default password: 12345678). Open the APP, select your engraver, and you can now control it wirelessly.

Video: A guide on connecting the ATOMSTACK S20 Pro to a mobile phone via WiFi and using the dedicated application for control.

4. Materiales de grabado y corte

The S20 Pro is capable of engraving and cutting a wide variety of materials.

Multiple carving materials available for ATOMSTACK S20 Pro laser engraver

Imagen: Un collage muestraasing various materials that can be engraved or cut by the ATOMSTACK S20 Pro, including wood, metal, acrylic, leather, and more.

5. High Precision Engraving

The 0.08 * 0.1mm laser spot area and 256-bit grayscale ensure high contrast and delicate patterns, especially on metal.

Close-up of ATOMSTACK S20 Pro laser module showing 20W laser power and 4x6W laser coupling technology

Imagen: Un corte transversal view of the laser module, illustrating the 4x6W laser coupling technology that achieves 20W output power and a fine 0.08x0.1mm compressed spot for high-precision engraving.

6. Deep and Fast Cutting

With 20000mW output, the S20 Pro can cut 15-20mm thick tung wood and 8-10mm thick black acrylic in one pass. It can also cut 0.05mm stainless steel. The air assist kit significantly enhances cutting speed and edge cleanliness.

ATOMSTACK S20 Pro demonstrating deep cutting capabilities on wood, acrylic, and metal

Image: The ATOMSTACK S20 Pro demonstrating its powerful cutting capabilities on various materials, including 15mm acrylic, 20mm wood, and 0.05mm metal sheets.

Mantenimiento

1. Cleaning the Laser Lens

Regularly clean the laser lens with a soft, lint-free cloth and isopropyl alcohol to ensure optimal performance and prevent residue buildup.

2. Gantry and Rail Lubrication

Periodically lubricate the gantry and rails with a small amount of machine oil to ensure smooth movement of the laser module.

3. Air Assist System Check

Inspect the air assist tube and pump for any blockages or damage. Ensure the air filter (if applicable) is clean.

ATOMSTACK S20 Pro with air assist pump, showing clean vs. burnt cutting edges

Image: A comparison showing the effect of the air assist pump on cutting quality, with a smooth, clean edge on the left (with air assist) and a burnt, rough edge on the right (no air assist).

Solución de problemas

1. El láser no dispara

Compruebe si el cable de alimentación está conectado de forma segura.
Asegúrese de que el botón de parada de emergencia no esté activado.
Verify the laser module is correctly installed and connected.
Confirm the software settings (power, speed) are appropriate for the material.

2. Poor Engraving/Cutting Quality

Adjust the focal length of the laser. Incorrect focus is a common cause of poor quality.
Limpie la lente láser.
Increase laser power or decrease engraving/cutting speed.
Asegúrese de que el material esté plano y colocado de forma segura.
Check the air assist system for proper function.

3. Connection Issues (WiFi/USB)

For WiFi, ensure your device is connected to the engraver's network and the password is correct.
For USB, ensure the cable is securely connected to both the engraver and the computer. Install necessary drivers if prompted.
Restart both the engraver and the controlling device.

Customer Testimonial Video

Video: A customer's real-world testing and review of the ATOMSTACK S20 Pro, demonstrating its performance and capabilities.

Presupuesto

Característica	Detalle
Número de modelo	S20 Pro
Optical Laser Power	20000 mW (20 W)
Potencia de la máquina	130 W
Área del punto láser	0.08 * 0.1 mm
Placa madre	32 bits
Escala de grises	256 bits
Kit de asistencia de aire	F30 Pro (Dual built-in pumps)
Max Wood Cutting Thickness	15-20mm (Tung wood, single pass)
Max Acrylic Cutting Thickness	8-10mm (Black acrylic, single pass)
Max Stainless Steel Cutting Thickness	0.05 mm
Dimensiones del producto	25.98 x 22.36 x 9.33 pulgadas
Peso del artículo	20 libras

Garantía y soporte

For warranty information, technical support, or further assistance, please refer to the official ATOMSTACK websitio o póngase en contacto con el servicio al cliente directamente.

The manufacturer is ATOMSTACK, Co, Ltd.

Para obtener recursos y asistencia adicionales, visite el Tienda oficial de ATOMSTACK.

	Guía de parámetros de corte y grabado láser ATOMSTACK K40 MAX-20W Una guía completa que detalla los parámetros de grabado y corte del módulo láser ATOMSTACK K40 MAX-20W en diversos materiales comunes. Incluye ajustes de velocidad, potencia, intervalo de línea y modos de imagen.
	Parámetros de corte y grabado láser para materiales comunes Una guía completa que detalla los parámetros óptimos de grabado y corte láser para una amplia gama de materiales, como madera, cuero, acrílico, vidrio, metal y más. Los parámetros abarcan el intervalo de línea, la velocidad, la potencia, el modo de imagen y las pasadas, con ejemplos visuales.ampLes.
	Parámetros de corte y grabado láser de la Atomstack A5 Pro Tablas detalladas de parámetros para la grabadora y cortadora láser Atomstack A5 Pro, que abarcan ajustes de grabado y corte para diversos materiales, como madera de tilo, madera dura, bambú, acrílico, papel kraft, espejos, cuero y acero inoxidable. Incluyen la velocidad recomendada, la velocidad máxima y los ajustes de pasada.
	Manual de la máquina de grabado láser ATOMSTACK A5 Pro Manual de usuario completo para la máquina de grabado láser ATOMSTACK A5 Pro, que cubre seguridad, instalación de software (LaserGRBL y LightBurn), funcionamiento y resolución de problemas.
	Parámetros de corte y grabado láser del modelo P7 M30 Tablas de parámetros completas para el grabador y cortador láser AtomStack P7 M30, que detallan configuraciones para diversos materiales como madera de tilo, madera dura, bambú, acrílico, papel Kraft, espejos y cuero para operaciones de grabado y corte.
	Parámetros de corte y grabado láser ATOMSTACK para materiales comunes Una guía completa de parámetros de grabado y corte para diversos materiales utilizando máquinas láser ATOMSTACK, incluidos ajustes de velocidad, S-Max y pasadas.

ATOMSTACK S20