COMTEC ZDR045 Dual Camera Dashcam User Manual

1. Introducción

The COMTEC ZDR045 is a high-performance dual-camera dashcam designed to record both the front and rear views of your vehicle. It incorporates advanced features such as STARVIS 2 technology for superior night recording, Full HD resolution, GPS, and a suite of driving support functions. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Características principales

2.1. Enhanced Night Recording with STARVIS 2

The ZDR045 is equipped with Sony's STARVIS 2 CMOS sensors for both front and rear cameras. This advanced back-illuminated technology significantly improves night recording performance, delivering images with lower noise and higher clarity compared to conventional STARVIS sensors. This ensures critical details are captured even in low-light conditions.

2.2. Wide-Angle Dual Camera Recording

Both front and rear cameras feature a 168° wide-angle lens (horizontal 138°, vertical 70°). This broad field of view captures a wide area around your vehicle, including regions to the front, rear, left, and right that might otherwise be missed by narrower lenses.

2.3. Driving Support Functions

The ZDR045 includes several driving support functions to enhance safety. These functions provide alerts to help prevent potential incidents:

• Rear Vehicle Approach Alert: Detects vehicles approaching from behind and provides voice or alarm alerts. This can also trigger automatic event recording as 'Rear Vehicle Approach Recording Data' based on settings.
• Forward Vehicle Collision Warning: Detects continuous close proximity to a vehicle ahead and alerts with voice or alarm, helping to prevent unintentional aggressive driving.
• Forward Vehicle Departure Alert: Detects when the vehicle in front starts moving and alerts the driver.
• Forward Vehicle Proximity Alert: Alerts when approaching a vehicle ahead too closely.
• Front Traffic Signal Alert: Detects when the traffic light ahead turns green and alerts the driver.
• Drive Support Function: Detects rapid acceleration, rapid deceleration, or rapid steering and provides alerts.
• Vehicle Speed Alarm Function: Alerts if the set speed limit is exceeded.

Note: Driving support functions are not a substitute for safe driving practices and do not prevent accidents. Always pay attention to actual traffic conditions. Some functions require GPS reception to operate. Performance may vary depending on environmental conditions, weather, vehicle type, color, and mounting position.

2.4. Full HD 2-Megapixel Recording

Both front and rear cameras record in Full HD (2-megapixel) resolution. This high-quality recording ensures clear and detailed footage, which is crucial for accident investigation and smooth processing of unexpected incidents. The recorded footagpodemos ser reviewed on the main unit's LCD screen or a computer.

2.5. Parking Surveillance Function (Optional)

By connecting the optional HDROP-14 direct wiring cord (sold separately), the parking surveillance function can be activated. This feature allows the dashcam to record impacts while parked, capturing both front and rear footage. It can also perform continuous recording during parking surveillance. Footage is saved to a dedicated parking surveillance folder for easy identification.

• Impact Quick Recording: Activates upon impact detection to record footage. It remains stopped during normal parking to conserve power, enabling ultra-long parking surveillance.
• One-Time Parking Surveillance Mode: Allows temporary activation of parking surveillance even if it's normally off, useful for specific situations when away from home.
• Parking Surveillance Mode Pass Function: Temporarily deactivates parking surveillance when parking in areas prone to impacts (e.g., mechanical car parks, vibrating areas, windy days).
• Grabación de lapso de tiempo: Compresses still images recorded at 1 frame per second into a short video, enabling long-duration recording during parking surveillance.

2.6. microSD Card Maintenance-Free

The ZDR045 utilizes a proprietary file system that is less prone to data fragmentation compared to standard file systems (like FAT) used in computers. This allows for extended use of the microSD card without the need for frequent formatting. While regular formatting is not strictly required, it can help extend the lifespan of the microSD card, which is a consumable item.

2.7. High-Speed Recording from Engine ON

Thanks to its high-speed startup system, the ZDR045 begins recording immediately after the engine is turned ON. This ensures that no critical footage is missed from the moment your vehicle starts moving.

2.8. HDR (High Dynamic Range) Function

The built-in HDR function effectively corrects for overexposure (whiteout) and underexposure (blackout), and performs well in backlit situations. It records clear images even in scenes with significant brightness differences, such as entering or exiting tunnels, or when facing strong headlights at night.

2.9. Noise Countermeasures

The ZDR045 is designed with noise countermeasures to minimize interference with other in-car electronics, such as digital terrestrial broadcasting reception and GPS navigation systems.

2.10. Compatible with National LED Traffic Signals

The device reliably records traffic signals across Japan, accommodating the different power frequencies used in Eastern and Western regions.

2.11. Three Image Protection Functions

• Función de respaldo: The proprietary file system and built-in supercapacitor protect recorded data, ensuring a high probability of recovery even if power is suddenly cut off due to an accident.
• SD Card Check Function: The device checks the microSD card at startup. If damage is detected, an alert is displayed on the LCD, preventing missed recordings.
• Emergency Recording Stop Function: Automatically stops recording upon detecting a significant impact (e.g., an accident). This prevents important footage from being overwritten if the vehicle is moved or the device is turned on during post-accident procedures or repairs. Impact detection sensitivity is adjustable in 11 levels.

3. Guía de configuración

This section provides general guidelines for installing your COMTEC ZDR045 dashcam. For detailed, vehicle-specific instructions, please refer to the included installation manual.

3.1. Contenido del paquete

Antes de la instalación, verifique que todos los componentes estén presentes:

• Front Camera Unit x1
• Rear Camera Unit x1
• Camera Cable (approx. 9m) x1
• Front Camera Mounting Bracket x1
• Front Camera Mounting Bracket Double-Sided Tape x1
• Rear Camera Mounting Bracket Double-Sided Tape x1
• gradoasing Cleaner x1
• 12V Cigarette Lighter Plug Cord (approx. 4m) x1
• Tarjeta microSD (32 GB/Clase 10) x1
• Instruction Manual (with warranty) x1

3.2. Pasos de instalación

1. Elija las ubicaciones de montaje: Select optimal positions for the front and rear cameras on your windshield and rear window, respectively, ensuring clear views and minimal obstruction to the driver's sight.
2. Superficies limpias: Use the provided degreasing cleaner to thoroughly clean the mounting surfaces for both cameras.
3. Montar cámaras: Attach the front and rear camera mounting brackets using the double-sided tape. Securely attach the cameras to their brackets.
4. Conectar cables: Connect the camera cable between the front and rear units. Route the cable carefully along the vehicle's interior trim to avoid interference and ensure a neat installation.
5. Conexión de energía: Connect the 12V cigarette lighter plug cord to the front camera unit and then to your vehicle's cigarette lighter socket. For parking surveillance functionality, the optional HDROP-14 direct wiring cord is required and should be professionally installed.
6. Insertar tarjeta microSD: Insert the included 32GB microSD card into the designated slot on the main unit.
7. Configuración inicial: Turn on your vehicle's ignition. The dashcam will power on. Follow the on-screen prompts to set the date, time, and other initial configurations.

4. Instrucciones de funcionamiento

4.1. Grabación básica

The ZDR045 automatically starts recording when the vehicle's engine is turned on. It records continuously in a loop, overwriting the oldest files when the microSD card is full, unless specific event recordings are protected.

4.2. Volverviewing Recorded Footage

Puedes volver aview comida grabadatage directly on the dashcam's LCD screen or by removing the microSD card and using the dedicated viewer software on a computer. The viewer software allows for detailed analysis, including G-sensor data, and conversion of footage to video or still images.

4.3. Ajuste de la configuración

Access the device's menu via the buttons on the unit to adjust various settings, including recording resolution, impact detection sensitivity, parking surveillance options, and driving support function preferences. Refer to the detailed instruction manual for specific menu navigation.

5. Mantenimiento

5.1. microSD Card Care

While the ZDR045's proprietary file system reduces the need for frequent formatting, it is recommended to periodically format the microSD card (e.g., once a month) to maintain optimal performance and extend its lifespan. Always format the card using the dashcam's menu function.

5.2. Limpieza del dispositivo

Wipe the camera lenses and the main unit's screen with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the device.

6. Solución de problemas

If you encounter issues with your ZDR045, refer to the following common troubleshooting tips:

• El dispositivo no enciende: Check the power connection. Ensure the cigarette lighter socket is functioning or the direct wiring cord is correctly installed.
• Problemas de grabación: Ensure the microSD card is properly inserted and not full. Try formatting the card. If the issue persists, the card may be damaged and require replacement.
• GPS not receiving signal: Asegúrese de que el dispositivo tenga un claro view of the sky. Some functions may not work without a GPS signal.
• Driving support functions not working: Verify GPS signal reception. Performance can be affected by environmental factors, weather, and vehicle conditions.
• Problemas de calidad de la imagen: Ensure camera lenses are clean. Check settings for resolution and HDR.

For more complex issues, consult the full instruction manual or contact COMTEC customer support.

7. Especificaciones del producto

8. Garantía y soporte

8.1. Garantía del producto

The COMTEC ZDR045 comes with a 3-year warranty from the date of purchase. Please retain your proof of purchase (e.g., delivery note) as it is required for warranty claims. The warranty does not apply if the product is used outside of Japan or if proof of purchase date is unavailable.

8.2. Data Recovery Service

COMTEC dashcams include a complimentary data recovery service for one year from the date of purchase. This service aims to repair recorded data that has become unreadable due to damage to the main unit or SD card, making it playable again. Please note that overwritten recorded data or data that can no longer be written due to the lifespan of the SD card cannot be recovered. For detailed information regarding this service, please visit the official COMTEC websitio.

8.3. Viewer software

Un dedicado viewer software is available for download from the COMTEC homepage. This software allows you to review recorded data on your computer, including video, audio, and G-sensor information. You can also convert recorded data into video or still image files for saving.

For further assistance or detailed product information, please visit the official COMTEC websitio o póngase en contacto con el servicio de atención al cliente.