WilTec 63458

WilTec Naturewater NW-1000 Pro RO Reverse Osmosis Replacement Filter User Manual

Model: NW-1000 Pro RO Replacement Filter (Part No. 63458)

1. Introducción

This document provides essential information for the installation, operation, and maintenance of the WilTec Naturewater NW-1000 Pro RO Reverse Osmosis Replacement Filter. This filter is specifically designed for use with the Naturewater NW-1000 Pro mobile reverse osmosis system.

The RO (Reverse Osmosis) membrane is a critical component of your water purification system, responsible for removing a wide range of contaminants. Regular replacement of this filter ensures the continued high quality and purity of your drinking water.

Fresh water being poured into a glass, symbolizing clean drinking water.

Image: Freshly purified water being poured into a glass.

2. Información de seguridad

Please read and understand all safety instructions before handling or installing the replacement filter. Failure to follow these instructions may result in property damage or injury.

  • Always turn off the water supply to the reverse osmosis system before attempting any filter replacement.
  • Disconnect the power supply to the system, if applicable, before maintenance.
  • Ensure hands are clean when handling new filters to prevent contamination.
  • Dispose of old filters according to local regulations.
  • No utilice el filtro con agua que no sea microbiológicamente segura o de calidad desconocida sin una desinfección adecuada antes o después del sistema.

3. Componentes del producto

The Naturewater NW-1000 Pro RO Replacement Filter package includes:

  • 1 x Naturewater NW-1000 Pro RO Membrane Filter (Part No. 63458)
De cerca view of the Naturewater NW-1000 Pro RO replacement filter.

Image: The Naturewater NW-1000 Pro RO Replacement Filter.

4. Instalación y reemplazo del filtro

This section details the process for replacing the RO membrane filter in your Naturewater NW-1000 Pro mobile reverse osmosis system.

  1. Prepare el sistema: Turn off the power to your NW-1000 Pro system and close the water inlet valve to stop the water supply.
  2. Compartimento del filtro de acceso: Open the filter compartment cover on your NW-1000 Pro system. You will see labeled slots for different filters, typically including PAC, RO, and CF.
  3. Remove Old RO Filter: Locate the filter labeled "RO" (Reverse Osmosis). Gently twist the old RO filter counter-clockwise to unlock it, then pull it out from its housing. Be prepared for some residual water to drain.
  4. Insert New RO Filter: Remove the new Naturewater NW-1000 Pro RO Replacement Filter from its packaging. Align the new filter with the "RO" slot in the system. Push it in firmly and then twist clockwise to lock it into place. Ensure it is securely seated.
  5. Cerrar compartimento: Cierre la tapa del compartimento del filtro.
  6. Restaurar el agua y la energía: Slowly open the water inlet valve to restore water supply to the system. Plug in and turn on the power to your NW-1000 Pro system.
  7. Limpiar el sistema: It is crucial to flush the new filter. Refer to your NW-1000 Pro system's main manual for specific flushing instructions. Typically, this involves running water through the system for a few minutes to remove any air and carbon fines.
Diagram showing the installation of the RO membrane filter into the Naturewater NW-1000 Pro system, with labels for PAC, RO, and CF filter slots.

Image: Installation of the RO membrane filter into the system.

5. Principios de funcionamiento

The Naturewater NW-1000 Pro RO Replacement Filter utilizes reverse osmosis technology to purify water. This process involves forcing water through a semi-permeable membrane with extremely small pores, measuring 0.0001 µm (micrometers).

This fine filtration effectively removes dissolved solids, sediments, and a wide range of contaminants, including:

  • Medicine residues
  • Metales pesados
  • Chlorine and its byproducts
  • Bacterias y virus
  • Pesticides and herbicides

The result is highly purified water with significantly reduced Total Dissolved Solids (TDS), improving taste and safety.

Chart illustrating Total Dissolved Solids (TDS) levels in parts per million (ppm) for different water types, from soft to very hard, and the effectiveness of reverse osmosis.

Image: Total Dissolved Solids (TDS) levels and water quality.

6. Mantenimiento

The RO membrane filter has a finite lifespan and its effectiveness decreases over time as contaminants accumulate. Regular replacement is crucial for maintaining optimal water quality and system performance.

  • Programa de reemplazo: Refer to your Naturewater NW-1000 Pro system's main manual for the recommended RO membrane replacement schedule. This typically depends on water usage and incoming water quality, but generally ranges from 12 to 24 months.
  • Indicadores de reemplazo: Signs that your RO membrane may need replacement include a noticeable decrease in water flow, a decline in water taste or odor, or an increase in the TDS level of the purified water.
  • Procedimiento: Follow the steps outlined in the "Installation and Filter Replacement" section (Section 4) to replace the RO membrane filter.

7. Solución de problemas

If you experience issues with your Naturewater NW-1000 Pro system after replacing the RO filter, consider the following:

  • Bajo caudal de agua: Ensure the new filter is correctly seated and locked. Check for any kinks in the water lines. If the issue persists, the pre-filters (PAC, CF) might also need replacement.
  • Mal sabor/olor del agua: Ensure the system was properly flushed after installation. If the taste or odor persists, other filters in the system (PAC, CF) may need to be replaced.
  • Fugas: Verify that all connections are tight and the filter is correctly installed and locked. Check O-rings for proper seating.

For more detailed troubleshooting, consult the complete user manual for your Naturewater NW-1000 Pro mobile reverse osmosis system or contact customer support.

8. Especificaciones

Nombre del modelo Naturewater NW-1000 Pro RO Replacement Filter
Número de pieza 63458
Marca WilTec
Dimensiones (L x An x Al) 6.8 x 6.8 x 29 cm (2.68 x 2.68 x 11.42 pulgadas)
Peso 480 gramos (1.06 lbs)
Material Polipropileno (PP)
Precisión de filtración 0.0001 µm
Sistema compatible Naturewater NW-1000 Pro Mobile Reverse Osmosis System
Característica especial Advanced contaminant removal
Image showing the dimensions of the Naturewater NW-1000 Pro RO replacement filter, with a diameter of 68mm and length of 290mm.

Image: Dimensions of the RO membrane filter.

9. Información de garantía

This replacement filter is a consumable item. For specific warranty details regarding manufacturing defects, please refer to the warranty policy provided with your original Naturewater NW-1000 Pro system or contact WilTec customer service. The lifespan of the filter is dependent on usage and water quality and is not covered by a standard warranty against normal wear and tear.

10. Atención al cliente

If you have any questions, require technical assistance, or need to purchase additional replacement filters, please contact WilTec customer support. You can find contact information on the official WilTec websitio o a través de su punto de compra original.

WilTec Wildanger Technik GmbH
Visita la tienda WilTec en Amazon

Documentos relacionados - 63458

Preview Manual de funcionamiento del sistema de ósmosis inversa (OI) WilTec
Este manual de operación de WilTec proporciona instrucciones detalladas para la instalación, el uso y el mantenimiento de sus sistemas de purificación de agua por ósmosis inversa (OI). Abarca los componentes del sistema, los principios de funcionamiento, los pasos de instalación, la solución de problemas comunes y las precauciones de seguridad importantes para modelos como las series NW-RO50 y NW-RO400.
Preview Manual de funcionamiento del filtro externo para acuario SunSun serie HW
Manual de instrucciones completo para los filtros externos de acuario Wiltec SunSun serie HW (HW-702A a HW-704B). Incluye información sobre instalación, materiales filtrantes, mantenimiento, solución de problemas y eliminación. Ideal para acuarios de agua dulce y salada.
Preview Manual de uso: Mini-incubadora de 12 uova Wiltec 52016
Scopri come utilizzare al meglio la tua mini-incubatrice Wiltec per 12 uova (modello 52016) con este manual de uso completo. Incluir instrucciones dettagliate, consigli per l'incubazione e risoluzione problemi.
Preview Filtros de presión para estanques WilTec serie CPF con UVC: manual de instrucciones y guía técnica
Manual de instrucciones completo y guía técnica para los filtros de presión para estanques WilTec Serie CPF con UVC integrado. Abarca la instalación, el funcionamiento, el mantenimiento, las normas de seguridad, las especificaciones técnicas y la información sobre la garantía.
Preview Wiltec 75.5L Parts Washer Manual (Model 65024) - Assembly, Operation, Maintenance
Comprehensive user manual for the Wiltec 75.5L Parts Washer (Model 65024), covering safety instructions, power requirements, component list, assembly, operation, maintenance, and disposal. Includes detailed steps and important warnings.
Preview Manual de Usuario y Especificaciones Técnicas del Compresor de Aerógrafo WilTec AF189
Este manual proporciona instrucciones detalladas para el uso seguro y eficiente del compresor de aerógrafo WilTec AF189 (Artículo 34205), incluyendo pautas de seguridad, especificaciones técnicas, manejo de la estación reductora, lista de piezas y normativas de conformidad.