Introducción
This manual provides detailed instructions for the setup, operation, and maintenance of your Socket Mobile SocketScan S720 barcode scanner. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Image: The Socket Mobile SocketScan S720 barcode scanner, presented in a vibrant red finish, is shown securely seated in its black charging dock. The scanner features a comfortable ergonomic grip and visible scanning window.
Guía de configuración
1. Desempaquetado y carga inicial
- Carefully remove the SocketScan S720 scanner and its accessories from the packaging.
- Connect the charging cable to the charging dock and then to a power source.
- Place the scanner into the charging dock. The LED indicator on the scanner will show charging status. Allow the scanner to fully charge before first use (approximately 4-6 hours).
2. Pairing with a Host Device (Bluetooth)
The SocketScan S720 uses Bluetooth for wireless communication. Follow these steps to pair it with your smartphone, tablet, or computer:
- Encendido: Press and hold the small power button on the scanner until it powers on.
- Ingrese al modo de emparejamiento: Scan the appropriate Bluetooth pairing barcode from the Quick Start Guide or the Socket Mobile website. This will put the scanner into discoverable mode. The Bluetooth LED will flash rapidly.
- Habilitar Bluetooth en el dispositivo host: On your host device (e.g., smartphone), go to the Bluetooth settings and ensure Bluetooth is enabled.
- Select Scanner: Buscar available devices. The SocketScan S720 should appear as "Socket S720 [XXXXXX]" (where XXXXXX is the last 6 digits of the Bluetooth address). Select it to pair.
- Confirmar emparejamiento: Once paired, the Bluetooth LED on the scanner will turn solid blue, indicating a successful connection.
Note: For specific operating systems (iOS, Android, Windows), refer to the Socket Mobile support website for detailed pairing instructions and application integration.
Instrucciones de funcionamiento
1. Escaneo de códigos de barras
- Asegúrese de que el escáner esté encendido y emparejado correctamente con su dispositivo host.
- Apunte la ventana del escáner hacia el código de barras que desea escanear.
- Press and hold the large scan button. A red aiming beam will appear.
- Center the aiming beam over the barcode. The scanner will emit a beep and the LED will flash green upon a successful scan.
- The scanned data will be transmitted to your host device as keyboard input.
2. Indicadores LED
- LED verde: Escaneo exitoso.
- Blue LED (Solid): Bluetooth conectado.
- Blue LED (Flashing): Bluetooth discoverable/pairing mode.
- LED rojo (fijo): Batería baja.
- LED rojo (intermitente): Error de carga.
- Amber LED (Solid): Cargando.
- Amber LED (Off when charging): Completamente cargado.
Mantenimiento
1. Limpieza del escáner
- Utilice un paño suave y sin pelusa ligeramente seco.ampLimpie con agua o una solución de limpieza suave el exterior del escáner.
- No utilice limpiadores abrasivos, disolventes o productos químicos agresivos, ya que pueden dañar el dispositivo.
- Gently clean the scanning window with a soft cloth to ensure optimal scanning performance.
2. Cuidado de la batería
- Para maximizar la vida útil de la batería, evite descargarla por completo con frecuencia.
- Guarde el escáner en un lugar fresco y seco cuando no lo utilice durante períodos prolongados.
- If the scanner will not be used for a long time, charge it to about 50% before storing.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El escáner no se enciende. | La batería está agotada. | Charge the scanner using the provided charging dock and cable. |
| Scanner does not pair via Bluetooth. | El escáner no está en modo de emparejamiento; Bluetooth desactivado en el dispositivo host; interferencia. | Ensure scanner is in pairing mode (flashing blue LED). Verify Bluetooth is enabled on your host device. Move closer to the host device. |
| El escáner no lee códigos de barras. | Barcode damaged; incorrect symbology enabled; dirty scanning window. | Try scanning a different barcode. Ensure the barcode is not damaged. Clean the scanning window. Check scanner configuration for enabled symbologies. |
| Los datos escaneados son incorrectos o incompletos. | Incorrect scanner configuration; host device input issues. | Reset scanner to factory defaults (scan specific barcode from manual). Ensure your host device's input method is correctly configured. |
Presupuesto
- Modelo: SocketScan S720 (CX3987-3044)
- Conectividad: Bluetooth
- Tipos de código de barras: 1D/2D Linear Barcode
- Fuente de energía: Funciona con pilas (se requieren 2 pilas AA)
- Dispositivos compatibles: Computadora de escritorio, computadora portátil, teléfono inteligente
- Peso del artículo: 1.51 libras
- Dimensiones del paquete: 10.71 x 8.66 x 7.13 pulgadas
- Fabricante: ENCHUFE
- Fecha de primera disponibilidad: 25 de enero de 2023
Información de garantía
Socket Mobile products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Socket Mobile webSitio web o la tarjeta de garantía incluida con el producto. Conserve el comprobante de compra para reclamaciones de garantía.
Atención al cliente
For technical assistance, product inquiries, or additional support, please visit the official Socket Mobile support website or contact their customer service department. Online resources often include FAQs, driver downloads, and advanced configuration guides.
Websitio: www.socketmobile.com/support
