Producto terminadoview
The 6 Sigma Custom Carburetor Jet Kit is designed to optimize the performance and extend the life of your ATV's engine, specifically for the Canyon 250 ATV. This kit addresses the lean condition that can occur after installing or modifying an exhaust or intake system, which can lead to engine damage due to excessive heat. By providing precise fuel mixture adjustments across all throttle positions, the kit ensures improved throttle response and increased horsepower.
Each kit is custom-made to match your specific vehicle's year, model, modifications, and riding elevation, ensuring optimal tuning for your application.
Figura 1: Packaging of the 6 Sigma Custom Carburetor Jet Kit, illustrating the included components and potential horsepower gains.
Contenido del kit
The 6 Sigma Custom Carburetor Jet Kit includes all necessary components for a comprehensive carburetor tuning:
- Chorros principales
- Avión piloto
- Ajustadores de agujas
- Espaciadores de nailon
- Drill Bits (for Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod)
- Esquema del carburador
- Presupuesto
- Herramienta sincronizadora de carburador (instrucciones para construirla por $5)
- Procedimiento de limpieza del carburador
- Técnicas de afinación adecuadas
- Step-by-step instructions with photos
Configuración y personalización
To ensure the jet kit is precisely tailored for your vehicle, specific information is required at the time of order. This customization is crucial for achieving optimal performance and preventing engine issues.
Figura 2: Important information required for custom kit design, ensuring compatibility and performance.
Please provide the following details via email to 6SigmaJetKits@gmail.com Después de la compra:
- Exact Year of your ATV
- Exact Model of your ATV
- Cualquier Modifications Made to your ATV (e.g., aftermarket exhaust, intake)
- Your typical Riding Elevation
This information allows 6 Sigma to design and build a kit that perfectly matches your specific application.
Instrucciones de instalación y funcionamiento
The jet kit is designed for straightforward installation, requiring only basic hand tools. Comprehensive step-by-step instructions with photos are included to guide you through the process.
Proceso de instalación:
- Refer to the included detailed instructions and carb schematic for your specific model.
- Perform the recommended carb cleaning procedure before installation.
- Install the Main Jets, Pilot Jet, Needle Adjusters, and Nylon Spacers as directed.
- Utilize the provided drill bits for Slide Hole Mod, Slide Spring Mod (for CV carbs), and Idle Mixture Mod as applicable to your carburetor type.
- Follow instructions for building and using the Carb Synchronizer Tool if necessary for multi-carburetor setups.
Post-Installation and Tuning:
After installation, proper tuning is essential to maximize the benefits of the jet kit. The kit includes guidance on proper tuning techniques.
- Pay attention to engine response across all RPM ranges.
- The kit is designed to improve throttle response and eliminate lean exhaust popping.
- If you experience any issues or have questions during tuning, full support is available from 6 Sigma.
Mantenimiento y cuidado
While the jet kit itself requires minimal maintenance, ensuring the overall health of your carburetor and fuel system is crucial for sustained performance.
- Regularly inspect your carburetor for cleanliness. The kit includes a carb cleaning procedure, which should be followed periodically or if performance degrades.
- Ensure your air filter is clean and properly maintained to prevent debris from entering the carburetor.
- Use fresh, high-quality fuel. Stale or contaminated fuel can lead to carburetor issues.
- Periodically check all fuel lines and connections for leaks or damage.
Solución de problemas
If you encounter issues after installing the jet kit, consider the following common troubleshooting steps:
| Síntoma | Posible causa | Solución |
|---|---|---|
| Engine still runs lean (e.g., exhaust popping) | Incorrect jetting for modifications/elevation, air leak, or improper installation. | Double-check installation steps. Verify provided vehicle information was accurate for custom kit. Inspect for air leaks around carburetor boots. Contact 6 Sigma support for re-evaluation of jetting. |
| Poor throttle response | Improper needle adjustment, clogged pilot jet, or incorrect slide modification. | Review needle adjustment procedures. Clean pilot jet. Ensure slide modifications (if applicable) were done correctly. |
| Engine bogging or sputtering | Too rich jetting, clogged main jet, or fuel delivery issue. | Verify main jet size. Ensure fuel flow is unobstructed. Re-evaluate tuning based on included instructions. |
For persistent issues or complex problems, it is recommended to contact 6 Sigma customer support for assistance.
Presupuesto
| Atributo | Detalle |
|---|---|
| Nombre del producto | Canyon 250 ATV Carb Jet Kit |
| Marca | 6 sigma |
| Número de modelo | 7341160680750 |
| ASIN | B0BV49BBWM |
| Tipo de servicio del vehículo | All Terrain Vehicle (ATV) |
| Kit Customization | Custom made based on Year, Model, Modifications, and Elevation |
Garantía y soporte
6 Sigma stands behind the quality and performance of their Custom Carburetor Jet Kits.
Garantía de satisfacción:
A 100% Satisfaction Guarantee is offered. If you are not satisfied with the results after installation, a full refund will be provided.
Atención al cliente:
Full support is available for installation, tuning, and any questions you may have regarding your jet kit. For assistance, please contact 6 Sigma via email at 6SigmaJetKits@gmail.com.
