Manual del usuario del cortafuegos unificado LANCOM R&S UF-60 LTE

1. Introducción

This manual provides essential information for the installation, operation, and maintenance of your LANCOM R&S Unified Firewall UF-60 LTE. Please read this manual thoroughly before using the device to ensure proper setup and functionality. Retain this document for future reference.

2. Información de seguridad

Tenga en cuenta las siguientes precauciones de seguridad para evitar daños al dispositivo o lesiones al personal:

• Asegúrese de que el dispositivo esté colocado sobre una superficie estable y nivelada.
• No exponga el dispositivo a la humedad, temperaturas extremas o luz solar directa.
• Utilice únicamente el adaptador de corriente suministrado con el dispositivo.
• No abra el dispositivo casing. Deje todo servicio a personal cualificado.
• Mantenga las aberturas de ventilación despejadas para evitar el sobrecalentamiento.

3. Contenido del paquete

Verifique que todos los artículos estén presentes en el paquete:

• LANCOM R&S Unified Firewall UF-60 LTE device
• Adaptador de corriente
• Two LTE Antennas
• Cable Ethernet
• Guía de inicio rápido

4. Dispositivo terminadoview

Familiarize yourself with the physical components and indicators of the UF-60 LTE firewall.

Figure 4.1: Front Panel of LANCOM UF-60 LTE
This image displays the front panel of the LANCOM UF-60 LTE Unified Firewall. The device is white with two black external antennas connected at the rear, extending upwards. On the left side of the front panel, the 'LANCOM Systems' and 'ROHDE & SCHWARZ' logos are visible. On the right side, a series of LED indicators are present. These indicators include four for Ethernet ports (labeled ETH0, ETH1, ETH2, ETH3) and additional status indicators for LTE signal, Wi-Fi, and general system status.

4.1. Front Panel Indicators

• ETH0-ETH3 LEDs: Indicate activity and link status for the respective Ethernet ports.
• LED LTE: Shows the status of the LTE connection (e.g., signal strength, connection active).
• LED de estado del sistema: Indica el estado operativo general del dispositivo.

4.2. Rear Panel Ports (Typical Configuration)

• Entrada de energía: Se conecta al adaptador de corriente suministrado.
• Ethernet Ports (ETH0-ETH3): For connecting to your network devices (LAN) and WAN.
• LTE Antenna Connectors: For attaching the external LTE antennas.
• Ranura para tarjeta SIM: For inserting a SIM card for LTE connectivity.
• Botón de reinicio: Se utiliza para restaurar la configuración predeterminada de fábrica.

5. Configuración

5.1. Instalación del hardware

1. Adjuntar antenas: Screw the two LTE antennas onto the connectors at the rear of the device.
2. Insertar tarjeta SIM: Open the SIM card slot cover and insert a valid SIM card. Ensure correct orientation.
3. Conecte cables de red:
   • Connect your internet source (e.g., modem) to the designated WAN Ethernet port (typically ETH0).
   • Connect your local network devices (e.g., computer, switch) to the LAN Ethernet ports (ETH1-ETH3).
4. Conecte la electricidad: Plug the power adapter into the device's power input and then into an electrical outlet. The device will power on automatically.

5.2. Acceso a la configuración inicial

After powering on, wait for the system status LED to indicate readiness (refer to the Quick Start Guide for specific LED patterns).

1. Ensure your computer is connected to one of the LAN ports (ETH1-ETH3) of the firewall.
2. Abrir una web navegador e ingrese la dirección IP predeterminada (por ejemplo, http://192.168.1.1) or the hostname of the device.
3. Follow the on-screen instructions to complete the initial setup wizard, which typically includes setting up administrator credentials, network settings, and basic firewall rules.

6. Operación del dispositivo

The LANCOM R&S Unified Firewall UF-60 LTE operates primarily through its web-based management interface. This interface allows for comprehensive configuration and monitoring.

6.1. Acceso a la interfaz de administración

To access the management interface:

1. Ensure your computer is connected to the firewall's network.
2. Abrir una web browser and navigate to the device's IP address or hostname.
3. Enter your administrator username and password.

6.2. Key Features and Configuration Areas

• Configuración de la red: Manage WAN (LTE, Ethernet), LAN, VLANs, and routing.
• Reglas del firewall: Define security policies, access control lists, and intrusion prevention.
• VPN: Configure Virtual Private Network connections for secure remote access or site-to-site links.
• LTE Management: Monitor LTE signal strength, data usage, and connection status.
• Configuración del sistema: Manage user accounts, firmware updates, backups, and logging.

7. Mantenimiento

7.1. Actualizaciones de firmware

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates are typically performed via the web management interface under the 'System' or 'Maintenance' section. Always back up your configuration before performing a firmware update.

7.2. Limpieza

Clean the device periodically with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

7.3. Configuration Backup

It is recommended to regularly back up your device configuration. This allows for quick restoration of settings in case of an issue or when migrating to a new device.

8. Solución de problemas

Esta sección aborda problemas comunes que podrías encontrar.

• Sin energía:

  Ensure the power adapter is securely connected to both the device and a working electrical outlet. Verify the power outlet is functional.

• No Internet Connection (Ethernet WAN):

  Check the Ethernet cable connection between the firewall's WAN port and your modem/internet source. Verify that your modem is operational and receiving an internet signal. Check WAN configuration in the management interface.

• No Internet Connection (LTE):

  Ensure the SIM card is correctly inserted and active. Check LTE antenna connections. Verify LTE signal strength and connection status in the management interface. Contact your mobile network provider if the SIM card or service is suspected to be the issue.
• No se puede acceder a la interfaz de administración:

  Verify your computer is connected to a LAN port of the firewall. Ensure your computer's IP settings are set to obtain an IP address automatically (DHCP). Try clearing your browser's cache or using a different browser. If the IP address was changed, use the new address. If all else fails, a factory reset might be necessary (refer to the Quick Start Guide for reset procedure).

9. Especificaciones técnicas

Note: Specifications are subject to change without notice. For the most current information, please refer to the manufacturer's official website. The "Connectivity Technology: HDMI" might be a misclassification in the source data, as firewalls typically use Ethernet for primary network connectivity.

10. Garantía y soporte

10.1. Información de garantía

The LANCOM R&S Unified Firewall UF-60 LTE comes with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are provided by Lancom Systems. Please refer to the warranty card included with your product or visit the official Lancom Systems websitio para obtener información detallada.

10.2. Soporte técnico

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official support portal of Lancom Systems. You may also find FAQs and additional resources there to help resolve common issues.

Fabricante Websitio: www.lancom-systems.es