Manual del usuario de la pistola de pegamento caliente inalámbrica WORKPRO de 3.6 V

Introducción

Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This energy-saving, rechargeable glue gun kit is designed for various crafting and DIY projects, offering fast heating and a lightweight design for ease of use. It comes with 20 mini glue sticks and features an automatic safety power-off function. Please read this manual thoroughly before operation to ensure safe and efficient use of your new tool.

Información de seguridad

Always keep the glue gun away from children.
Do not touch the nozzle or melted glue as they can reach high temperatures and cause burns.
Use only glue sticks of the specified diameter (0.27" Dia) to prevent damage or malfunction.
Asegúrese de que el área de trabajo esté bien ventilada.
Do not leave the hot glue gun unattended when it is powered on.
Unplug or power off the glue gun when not in use or before performing any maintenance.
Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
Allow the equipment to cool down completely before packing it away.
This glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.

Contenido del paquete

Verifique el contenido del paquete para asegurarse de que todos los artículos estén presentes y sin daños:

1 x WORKPRO 3.6V Cordless Hot Glue Gun
20 x Mini Glue Sticks (0.27" Dia)
1 x cable de carga tipo C
1 x Manual de usuario (este documento)

WORKPRO Cordless Hot Glue Gun and included accessories — Image: The WORKPRO Cordless Hot Glue Gun shown with its included accessories, including the Type-C charging cable and a bundle of 20 mini glue sticks.

Producto terminadoview

Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun:

Diagram of WORKPRO Cordless Hot Glue Gun with labeled parts — Image: A detailed diagram of the WORKPRO Cordless Hot Glue Gun, highlighting key components such as the nozzle, ON/OFF switch, glue stick entry, LED indicator, trigger lever, Type-C cable, retractable stand-up base, and Type-C charging port.

Boquilla: Dispenses melted glue.
Interruptor encendido / apagado: Enciende y apaga el dispositivo.
Glue Stick Entry: Where glue sticks are inserted.
Indicador LED: Displays heating status (red for heating, green for ready) and charging status (red for charging, green for charged).
Trigger Lever: Activates glue dispensing.
Puerto de carga tipo C: Para conectar el cable de carga.
Retractable Stand-up Base: Provides stability when the gun is not in use.

Configuración

Charging the Glue Gun

The WORKPRO hot glue gun is equipped with a 2500mAh rechargeable lithium battery. Before first use, or when the battery is low, charge the device:

Locate the Type-C charging port on the glue gun.
Connect the provided Type-C charging cable to the glue gun and to a 5V 1A power source (e.g., power bank, computer USB socket, car USB socket, or a USB wall adapter).
El indicador LED se mostrará en rojo durante la carga y se volverá verde cuando esté completamente cargado.

WORKPRO Cordless Hot Glue Gun charging via USB-C — Image: The WORKPRO Cordless Hot Glue Gun connected via its Type-C cable to a laptop for charging, demonstrating its USB rechargeable capability. The LED indicator shows the charging status.

Instrucciones de funcionamiento

Follow these steps to operate your hot glue gun:

Insertar barra de pegamento: Insert a mini glue stick (0.27" diameter) into the back opening of the glue gun until it stops.
Encendido: Press and hold the ON/OFF switch for 3 seconds. The LED indicator will light up red, indicating that the gun is heating.
Precalentar: Allow the glue gun to preheat for approximately 90 seconds. The LED indicator will change from red to green when it is ready for use.
Aplicar pegamento: Once the LED is green, gently pull the trigger lever to dispense melted glue onto your desired surface.
Cierre automático: The glue gun is equipped with an 8-minute automatic safety power-off function. If left idle for 8 minutes, it will automatically power off to conserve battery and enhance safety.

WORKPRO Cordless Hot Glue Gun heating up with red LED indicator — Image: The WORKPRO Cordless Hot Glue Gun with its red LED indicator illuminated, signifying that it is in the process of heating up. A timer on the image shows "90S" for the fast preheating time.

Four-step instruction guide for using the WORKPRO Cordless Hot Glue Gun — Image: A visual guide demonstrating the four main steps of using the glue gun: 1) Inserting the glue stick, 2) Pressing the ON/OFF switch, 3) Waiting for the LED to turn green after 90 seconds of preheating, and 4) Pulling the trigger to dispense glue.

Notas importantes:

Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
Apague el equipo y déjelo enfriar completamente antes de guardarlo.
The glue gun features a less-drip nozzle design to reduce glue spillage and keep your work area clean.

Comparison of glue output from WORKPRO glue gun versus ordinary glue gun — Image: A side-by-side comparison illustrating the superior glue output and clarity of the WORKPRO glue gun (left) compared to an ordinary glue gun (right). The WORKPRO gun shows a consistent, clear glue flow at 0.14 oz/minute, while the ordinary gun shows a less controlled, drippy output at 0.07 oz/minute.

Mantenimiento

Limpieza: Ensure the glue gun is completely cool before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
Cuidado de la boquilla: No intente limpiar la boquilla mientras la pistola esté caliente. El pegamento endurecido alrededor de la boquilla puede retirarse con cuidado una vez que la pistola esté fría.
Almacenamiento: Store the glue gun in a cool, dry place, away from direct sunlight and out of reach of children. Ensure no glue stick is left partially melted in the chamber if storing for an extended period.
Cuidado de la batería: Para una vida útil óptima de la batería, evite descargarla por completo con frecuencia. Cárguela regularmente, incluso si no la usa constantemente.

Solución de problemas

Problema	Posible causa	Solución
La pistola de pegamento no se calienta.	La batería está baja o muerta. Power switch not pressed correctly.	Cargue completamente la pistola de pegamento. Press and hold the ON/OFF switch for 3 seconds until the LED lights up.
No glue dispenses when trigger is pulled.	La pistola de pegamento no está lo suficientemente caliente. Glue stick not fully inserted or jammed.	Espere hasta que el indicador LED se ponga verde. Ensure glue stick is fully inserted. Do not force it.
El pegamento gotea excesivamente desde la boquilla.	Normal during heating/cooling. Tamaño incorrecto de barra de pegamento.	Place the gun on its stand. Use only 0.27" diameter glue sticks.
LED indicator remains red.	Still heating up. Carga en curso.	Wait for approximately 90 seconds for it to turn green. Wait for charging to complete (LED turns green).

Presupuesto

Característica	Detalle
Marca	TRABAJO PRO
Número de modelo	W125235
Fuente de poder	Funciona con pilas (iones de litio)
Volumentage	3.6 voltios
Quétage	9 vatios
Capacidad de la batería	2500 mAh
Entrada de carga	5 V 1 A (Tipo C)
Tiempo de precalentamiento	Aprox. 90 segundos
Glue Output Speed	0.14 oz / min
Diámetro de barra de pegamento compatible	0.27 inches (Mini Sticks)
Apagado automático	8 minutos de inactividad
Peso del artículo	1.1 libras
Dimensiones del paquete	8.11 x 7.52 x 2.13 pulgadas
País natal	Porcelana
Material compatible	Wood, Ceramic, Metal, Stone

Garantía y soporte

For warranty information and customer support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official WORKPRO store on Amazon: Tienda WORKPRO

	Pistola de pegamento caliente con cable WORKPRO de 10 W: Instrucciones de uso y guía de seguridad Guía completa para la pistola de pegamento caliente con cable WORKPRO de 10 W, que incluye instrucciones de seguridad, funcionamiento, mantenimiento y aplicaciones. Incluye los modelos W099030AU, W099030AS y W099029AP.
	Manual del usuario de la pistola de pegamento caliente inalámbrica WORKPRO de 7.2 V Guía completa para la pistola de pegamento caliente inalámbrica WORKPRO de 7.2 V, que abarca seguridad, funcionamiento, mantenimiento y especificaciones técnicas. Aprenda a usar su pistola de pegamento de forma segura y eficaz en diversos proyectos de manualidades y bricolaje.
	Pistola de pegamento termofusible WORKPRO de 60 W: instrucciones de uso y manual de seguridad Instrucciones de funcionamiento completas, normas de seguridad, especificaciones y detalles de aplicación de la pistola de pegamento termofusible WORKPRO de 60 W (modelo GT12305-G). Incluye advertencias de seguridad, consejos de uso e información de mantenimiento.
	Pistola de pegamento caliente inalámbrica WORKPRO de 20 V: Instrucciones de uso y guía de seguridad Instrucciones de uso y advertencias de seguridad oficiales para la pistola de pegamento caliente inalámbrica WORKPRO de 20 V (modelo W125233A). Aprenda sobre el uso, el mantenimiento, la carga y la eliminación adecuados.
	Manual del usuario de la grapadora y clavadora eléctrica inalámbrica 2 en 1 WORKPRO (W125177A, W125180A) Este manual de usuario proporciona instrucciones completas para la grapadora y clavadora eléctrica inalámbrica 2 en 1 WORKPRO (modelos W125177A y W125180A). Incluye advertencias de seguridad esenciales, instrucciones de uso, especificaciones técnicas, procedimientos de carga, pasos de funcionamiento, mantenimiento, almacenamiento y eliminación.
	Manual del usuario y guía de la grapadora de alta resistencia 6 en 1 de WORKPRO Guía completa de la grapadora de alta resistencia WORKPRO 6 en 1 (modelos W023035A, W023036A) que cubre el funcionamiento, la selección de grapas, las aplicaciones y las instrucciones de seguridad.

WORKPRO W125235