Feit Electric 2x2 LED Troffer Light Instruction Manual

Introducción

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Feit Electric 2x2 LED Troffer Light, Model TR2X2G2/6WY/WH. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Información de seguridad

ADVERTENCIA: Riesgo de descarga eléctrica. Desconecte la alimentación desde el fusible o disyuntor antes de realizar cualquier instalación o mantenimiento.

PRECAUCIÓN: Adecuado para damp ubicaciones. No lo use donde esté directamente expuesto al agua.

• Asegúrese de que todas las conexiones eléctricas cumplan con los códigos y ordenanzas locales, así como con el Código Eléctrico Nacional (NEC).
• If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
• No intente alterar el accesorio. Cualquier alteración podría anular la garantía y representar un riesgo para la seguridad.
• This fixture is designed for 120-277V operation. Verify your supply voltage antes de la instalación.

Contenido del paquete

Verifique que todos los componentes estén presentes antes de la instalación:

• 1 x Feit Electric 2x2 LED Troffer Light (Model TR2X2G2/6WY/WH)
• Manual de instrucciones

Imagen: Frente view of the Feit Electric 2x2 LED Troffer Light.

Configuración e instalación

This LED troffer light is designed for lay-in installation in standard T-grid ceilings. It includes a hook mount for simplified wiring.

Herramientas necesarias (no incluidas):

• Destornillador
• Pelacables
• Alicates
• Gafas de seguridad

Pasos de instalación:

1. Apagar la energía: Before starting, ensure the power supply to the installation area is completely disconnected at the circuit breaker or fuse box.
2. Preparar la abertura del techo: Ensure the ceiling grid opening is a standard 2x2 foot size.
3. Conectar el cableado:
   • Open the wiring compartment on the back of the fixture.
   • Connect the incoming AC power wires to the fixture's wires: Black to Black (Line), White to White (Neutral), and Green to Green (Ground).
   • If using 0-10V dimming, connect the purple (DIM+) and gray (DIM-) wires from the fixture to the corresponding wires from your 0-10V dimmer (dimmer not included). Ensure proper polarity.
   • Secure all connections with appropriate wire connectors.
4. Posición fija: Carefully place the LED troffer into the T-grid ceiling opening. The fixture is lightweight and designed for easy handling.
5. Secure Fixture (Optional but Recommended): Use the integrated hook mounts to secure the fixture to the ceiling grid for added stability.
6. Restaurar energía: Una vez completada la instalación y todas las conexiones estén seguras, restablezca la energía en el disyuntor.

Imagen: Example of the Feit Electric 2x2 LED Troffer Light installed in a T-grid ceiling.

Instrucciones de funcionamiento

Selección de temperatura de color (5CCT)

Your Feit Electric LED Troffer Light features selectable color temperatures, allowing you to choose from five options:

• Blanco suave (3000K)
• Blanco neutro (3500 K)
• Blanco brillante (4000K)
• Luz diurna (5000K)
• Luz diurna de lujo (6500K)

You can select the desired color temperature in two ways:

1. Antes de la instalación: Locate the CCT selection switch on the side of the fixture. Slide the switch to your preferred color temperature setting.
2. After Installation (Wall Switch Toggle): If the CCT selection switch is set to 'SWITCH' mode, you can cycle through the color temperatures by quickly toggling your standard wall switch OFF and ON. The fixture will remember the last selected setting after a few seconds.

Image: Diagram illustrating the 5CCT selection options and methods.

Atenuación de 0 a 10 V

This fixture is equipped for 0-10V dimming. It is no compatible with standard residential dimmers. To utilize the dimming function, connect the purple (DIM+) and gray (DIM-) wires to a compatible 0-10V dimmer (sold separately). This allows for smooth dimming from 10% to 100% light output.

Mantenimiento

The Feit Electric 2x2 LED Troffer Light is designed for long-lasting, maintenance-free operation. No user-serviceable parts are inside.

• Limpieza: Para limpiar el dispositivo, asegúrese de que esté apagado. Use un paño suave, seco o ligeramente húmedo.amp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the finish or optical components.
• Lamp Reemplazo: The LEDs are integrated and not replaceable. The fixture has a rated life of 50,000 hours.

Solución de problemas

If you experience issues with your LED Troffer Light, refer to the following common solutions:

Presupuesto

Detailed specifications for the Feit Electric 2x2 LED Troffer Light:

Image: Visual representation of the fixture's dimensions and key specifications.

Garantía

Este producto Feit Electric está cubierto por una Garantía limitada de 5 años from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty service, please contact Feit Electric customer support.

Atención al cliente

For technical assistance, troubleshooting, or warranty inquiries, please contact Feit Electric customer support:

• Websitio: www.feit.com
• Teléfono: Consulte Feit Electric webSitio para números de contacto actuales.