Manual del usuario de la silla de oficina ergonómica de cuero sintético Yaheetech YAexj20001

1. Información importante de seguridad

Lea atentamente todas las instrucciones antes de ensamblar y usar. Conserve este manual para futuras consultas.

• Asegúrese de que todas las piezas estén presentes y sin daños antes del montaje. No utilice el producto si alguna pieza falta o está dañada.
• Monte la silla sobre una superficie suave y limpia para evitar rayones.
• No apriete demasiado los tornillos durante el montaje.
• No se suba a la silla. Úsela solo para sentarse.
• No exceda la capacidad de carga máxima de 136 kg (300 lbs).
• Mantenga a los niños alejados de las piezas móviles durante el funcionamiento.
• Revise periódicamente todos los pernos y tornillos para asegurarse de que estén bien apretados.

2. Configuración y montaje

The Yaheetech YAexj20001 office chair requires assembly. An accessory set with all necessary tools and hardware is included.

2.1 Desembalaje

Carefully remove all components from the packaging. Lay them out on a clean, soft surface to identify each part.

2.2 Identificación de componentes

Refer to the diagram below to identify all parts before beginning assembly.

Imagen: Explotó view showing all individual components of the Yaheetech office chair, including the base, casters, gas lift, seat, backrest, and armrests.

2.3 Pasos de montaje

Follow the step-by-step instructions provided in the included accessory set. Typically, assembly involves:

1. Fijación de las ruedas a la base de la silla.
2. Inserción del elevador de gas en la base de la silla.
3. Attaching the armrests to the seat.
4. Attaching the backrest to the seat and armrests.
5. Mounting the assembled seat and backrest onto the gas lift.

3. Instrucciones de funcionamiento

The Yaheetech YAexj20001 office chair offers several adjustable features for personalized comfort.

3.1 Ajuste de altura del asiento

To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. Release the lever at the desired height to lock it in place. The seat height can be adjusted between 48 cm and 58 cm.

3.2 Función de balanceo

The chair features a rocking function for relaxation. To activate the rocking function, pull the lever on the left side, beneath the seat, outwards. To lock the chair in an upright position, push the lever inwards. The rocking tension can be adjusted by turning the round knob located at the front, under the seat.

Imagen: Illustration demonstrating the chair's rocking function, showing the range of motion from 90 to 125 degrees, along with the tilt lock lever and tension adjustment knob.

3.3 Ergonomic Backrest and Padded Seat

The chair is designed with an S-shaped high back to conform to the natural curvature of the spine, providing support for the upper back, neck, and lumbar region. The seat is generously padded with high-density foam for comfort during extended use.

Imagen: Diagram illustrating the ergonomic design of the chair's backrest, highlighting support for the neck, back, and lumbar area.

Imagen: De cerca view of the chair's seat and armrests, detailing the high-density foam padding and breathable faux leather for ultimate comfort.

4. Cuidado y mantenimiento

Proper care will extend the life and appearance of your Yaheetech office chair.

• Limpieza: The faux leather upholstery is water and stain resistant. Wipe clean with a soft, damp Paño. Para manchas difíciles, use una solución jabonosa suave y seque inmediatamente. Evite productos químicos fuertes o limpiadores abrasivos.
• Inspección: Revise periódicamente todos los tornillos y pernos para asegurarse de que estén bien apretados. Vuelva a apretarlos si es necesario.
• Emocionante: When moving the chair, lift it rather than dragging it to prevent damage to the casters or base.
• Ambiente: Avoid prolonged exposure to direct sunlight or extreme temperatures, which can damage the faux leather.

5. Solución de problemas

Si tiene problemas con su silla, consulte los siguientes problemas y soluciones comunes:

6. Especificaciones

Detailed technical specifications for the Yaheetech YAexj20001 office chair:

• Modelo: YAexj20001
• Materiales: PU leather, Foam, Metal, Nylon, Plywood, PP
• Color: Blanco
• Dimensiones generales: 69 cm L × 71 cm W × 106-116 cm H (27.17 x 27.17 x 45.67 inches)
• Altura del asiento: 48-58 cm (ajustable)
• Dimensiones del asiento: 51 cm L x 50.5 cm D (20 x 19.88 inches)
• Armrest Height (from ground): 66.5-76.5 centímetros
• Capacidad de carga máxima: 136 kg (300 libras)
• Peso neto: 14.1 kg (31.4 libras)
• Material del marco: Metal
• Gas Mechanism: SGS certified heavy-duty gas lift

Imagen: Detailed diagram illustrating the dimensions of the Yaheetech office chair, including overall height, seat height, seat width, seat depth, and armrest height, along with the maximum load capacity of 136 kg.

Imagen: Explotó view highlighting key features such as water-repellent faux leather, padded headrest, padded armrests, thick seat cushion, smooth-rolling casters, and solid gas spring.

7. Garantía y soporte

For warranty information or customer support, please refer to the purchase documentation or contact Yaheetech directly through their official websitio o el minorista donde se compró el producto.

Yaheetech Official Websitio: Visita la tienda Yaheetech en Amazon