1. Introducción
Thank you for choosing the APLOS T03 Professional Tactical Flashlight. This manual provides essential information for the safe and effective use of your new flashlight. Please read it thoroughly before operation and retain it for future reference.
The APLOS T03 is a high-performance tactical flashlight designed for various applications, offering up to 5000 lumens of brightness and a long-range beam. It features multiple lighting modes, a durable aluminum alloy construction, and convenient USB-C recharging.
2. Contenido del paquete
Upon opening your APLOS T03 package, please verify that all the following items are included:
- APLOS T03 Professional Tactical Flashlight
- 1 x 21700 Lithium-Ion Battery (5000mAh, pre-installed)
- Cable de carga USB-A a USB-C
- Pocket Clip (pre-attached)
- Acollador
- Juntas tóricas de repuesto (2)
- Manual de usuario
3. Producto terminadoview y características
The APLOS T03 is engineered for reliability and performance. Key features include:
- Brillo alto: Salida de hasta 5000 lúmenes.
- De largo alcance: Illuminates distances up to 500 meters.
- Múltiples modos de iluminación: 7 modes including High, Medium, Low, Strobe, SOS, Save, and Moonlight.
- Función de memoria: Recuerda el último modo utilizado para mayor comodidad.
- Construcción duradera: Made from hard anodizing aluminum alloy with a stainless steel attack head.
- Recargable: Integrated USB-C charging port.
- Batería de alta capacidad: Alimentado por una batería de iones de litio de 5000 mAh.
- Gestión inteligente de energía: Prevents overheating and extends battery life.
- Water and Dirt Resistant: IP68 rated for protection against water and dust ingress.
4. Configuración
Antes del primer uso, siga estos pasos:
- Preparación de la batería: The 21700 Lithium-Ion battery is pre-installed. Unscrew the tail cap and remove the small insulating sticker from the positive end of the battery. This sticker prevents battery discharge during shipping. Re-screw the tail cap firmly.
- Carga inicial: It is recommended to fully charge the flashlight before its first use. Refer to the 'Charging' section for detailed instructions.
- Attach Lanyard/Clip: If desired, attach the included lanyard to the tail cap or adjust the pocket clip for secure carrying.
5. Instrucciones de funcionamiento
The APLOS T03 features a tactical tail switch with two detent levels for various functions.
5.1 Funcionamiento básico
- Encendido momentáneo: Lightly tap and hold the tail switch for momentary illumination. Release to turn off.
- Encendido/apagado constante: Presione completamente el interruptor de cola hasta que haga clic para encender o apagar la linterna.
5.2 Cambio de modo
Cuando la linterna está encendida:
- Modos de ciclo: With the flashlight ON, lightly tap the tail switch (without clicking) to cycle through the main brightness modes: Low → Medium → High.
- Modos especiales:
- Luz estroboscópica: From OFF, fully press and hold the tail switch for approximately 1 second to activate Strobe mode. Release to turn off. From ON, a quick double-tap of the tail switch (without clicking) may also activate Strobe.
- LLAMADA DE SOCORRO: From OFF, a quick triple-tap of the tail switch (without clicking) may activate SOS mode.
- Moonlight/Save: These modes are typically accessed by cycling through the main modes or through specific quick-press combinations. Refer to the quick guide card for exact sequences if not covered by the main cycle.
5.3 Función de memoria
The APLOS T03 features a mode memory function. When the flashlight is turned off and then back on, it will activate in the last used general lighting mode (Low, Medium, High).
5.4 Función de bloqueo
To prevent accidental activation, the flashlight may enter a lockout mode if left unused for a period (e.g., 3 minutes). To exit lockout, perform two rapid full presses (clicks) of the tail switch.
6. Carga
The APLOS T03 is equipped with a convenient USB-C charging port.
- Cable de conexión: Open the rubber cover on the side of the flashlight to expose the USB-C port. Insert the USB-C end of the charging cable into the flashlight's port.
- Conecte la electricidad: Plug the USB-A end of the cable into a compatible USB power source (e.g., wall adapter, power bank, computer USB port).
- Indicador de carga: The indicator light near the charging port will show the charging status:
- Rojo: Carga en curso.
- Verde: Carga completa.
- Tiempo de carga: A full charge typically takes approximately 2 hours and 15 minutes.
- Desconectar: Una vez completamente cargado, desconecte el cable y cierre bien la cubierta de goma para mantener la resistencia al agua.
7. Mantenimiento
Proper maintenance ensures the longevity and optimal performance of your APLOS T03 flashlight.
- Limpieza: Limpie el cuerpo de la linterna con un paño suave.amp Paño. No utilice limpiadores abrasivos ni disolventes.
- juntas tóricas: Periodically inspect the O-rings for wear and tear. Replace them with the provided spare O-rings if necessary to maintain water resistance. Apply a thin layer of silicone grease to the O-rings to ensure a good seal.
- Trapos: Keep the threads of the tail cap clean and lightly lubricated to ensure smooth operation and proper electrical contact.
- Cuidado de la batería: If the flashlight will not be used for an extended period, remove the battery to prevent potential leakage or damage. Store the battery in a cool, dry place.
- Puerto de carga: Ensure the USB-C charging port cover is securely closed when not charging to prevent dust and water ingress.
8. Solución de problemas
If you encounter issues with your APLOS T03 flashlight, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La linterna no se enciende. | Battery insulating sticker not removed. Battery low or depleted. Tail cap not fully tightened. Flashlight in lockout mode. | Remove the insulating sticker from the battery. Charge the battery fully. Tighten the tail cap securely. Perform two rapid full presses of the tail switch to exit lockout mode. |
| La salida de luz es tenue o parpadea. | Low battery. Poor contact between battery and terminals. | Charge the battery fully. Clean the battery contacts and flashlight terminals. Ensure the tail cap is tightened. |
| Flashlight gets hot on High/Turbo mode. | Normal operation for high-lumen flashlights. Prolonged use at maximum output. | This is normal. The flashlight has intelligent power management to prevent damage. Reduce brightness to a lower mode if discomfort occurs. |
| El indicador de carga no se enciende. | Charging cable or power source issue. Charging port cover not fully open. | Try a different USB-C cable or power source. Ensure the charging port cover is fully open and the cable is inserted correctly. |
If the problem persists after attempting these solutions, please contact APLOS customer support for further assistance.
9. Especificaciones
| Característica | Especificación |
|---|---|
| Modelo | T03 |
| Fuente de luz | LED (XHP70.3 HI 6000-6500K) |
| Salida máxima | 5000 lúmenes |
| Distancia del haz | Hasta 500 metros |
| Fuente de poder | 1 x 21700 Lithium-Ion Battery (5000mAh) |
| Puerto de carga | USB-C |
| Material | Hard Anodizing Aluminum Alloy |
| Resistencia al agua | IP68 (Waterproof and Dirtproof) |
| Dimensiones | 1.61" (D) x 1.06" (W) x 5.59" (H) / 41mm (D) x 27mm (W) x 142mm (H) |
| Peso | Approx. 6.1 ounces / 173 grams (with battery) |
| Características especiales | Compact design, Smart Power Indicator, Memory Function, Tactical Tail Switch |
10. Garantía y soporte
APLOS products are manufactured to high-quality standards. For warranty information, product support, or service inquiries, please refer to the warranty card included in your product packaging or visit the official APLOS website. Please have your product model (T03) and purchase date available when contacting support.
