Introducción
Thank you for choosing the Beghelli 4340F 100 Lumen LED Emergency Lamp. This device is designed to provide reliable emergency lighting in various environments. Please read this manual carefully before installation and use to ensure proper function and safety.
Producto terminadoview
The Beghelli 4340F is a compact and efficient LED emergency lamp, featuring a built-in battery for automatic operation during power outages. Its modern design and durable plastic construction make it suitable for both indoor and outdoor applications.
¿Qué hay en la caja?
- Beghelli 4340F 100 Lumen LED Emergency Lamp
- Herrajes de montaje
- Manual de usuario
Información de seguridad
- Desconecte siempre la energía antes de la instalación o el mantenimiento.
- La instalación debe ser realizada por un electricista calificado de acuerdo con las regulaciones de cableado locales.
- Do not expose the unit to extreme temperatures or direct moisture unless specified for outdoor use.
- No intente abrir ni reparar la unidad usted mismo. Consulte a personal de servicio técnico cualificado.
- Asegúrese de que la superficie de montaje sea estable y pueda soportar el peso delamp.
Configuración e instalación
The Beghelli 4340F emergency lamp is designed for wall-mounted installation, typically recessed into a standard electrical box. Follow these steps for proper setup:
1. Preparar la Unidad
Carefully remove the front cover of the emergency lamp to access the internal components. Connect the battery to the circuit board if it is not already connected. Ensure all connections are secure.
Image: The Beghelli 4340F emergency lamp with its front cover removed, revealing the internal battery and circuit board. This view is essential for initial setup and battery connection.
2. Mounting the Base
Install the black recessed box (not included, but shown in video as a typical installation method) into the wall according to standard electrical practices. Ensure the box is securely fastened and flush with the wall surface.
3. cableado
Connect the mains power supply (230V~50Hz) to the terminals on the circuit board. Refer to the wiring diagram provided with the product for specific connections. Ensure correct polarity and secure all wires.
4. Ensamble la Lamp
Once the wiring is complete and tested, carefully place the lamp's internal assembly (with the battery and circuit board) into the white casing. Then, secure the white casing into the recessed box. Finally, attach the front cover to the white casing, ensuring it clicks firmly into place.
Video: This video demonstrates the assembly process of the Beghelli emergency lamp, including connecting the battery, placing the internal components into the casing, and securing the unit into a recessed box.
Video: This video illustrates the final steps of installing the emergency lamp into a recessed wall box, showing how the unit fits securely and the cover is attached.
Video: This video provides another perspective on the installation of the Beghelli emergency lamp, demonstrating the secure placement of the lamp into its housing.
Instrucciones de funcionamiento
The Beghelli 4340F emergency lamp operates automatically once properly installed and connected to the mains power supply.
- Funcionamiento normal: When mains power is present, the lamp's internal battery will charge. The lamp permanecerá apagado.
- Operación de emergencia: En caso de un corte de energía, el lamp will automatically switch on, providing 100 lumens of LED light from its built-in battery.
- Duración de la batería: El lamp is designed to provide illumination for a specified duration during an emergency. Refer to the specifications for battery autonomy.
- Pruebas: It is recommended to periodically test the emergency lamp by temporarily cutting the mains power to ensure it functions correctly.
Mantenimiento
Regular maintenance ensures the longevity and reliability of your emergency lamp.
- Limpieza: Limpiar el exterior de la lamp con un paño suave y seco. No utilice limpiadores abrasivos ni disolventes.
- Comprobación de la batería: The built-in battery has a limited lifespan. If the lamp's emergency duration significantly decreases, the battery may need replacement. This should be done by a qualified technician.
- Prueba de funcionalidad: Perform a monthly test by simulating a power outage to confirm the lamp activates and provides adequate light.
- Inspección visual: Inspeccione periódicamente el lamp para cualquier signo de daño o desgaste.
Solución de problemas
If you encounter issues with your Beghelli 4340F emergency lamp, consulte los siguientes problemas y soluciones comunes:
| Problema | Posible causa | Solución |
|---|---|---|
| Lamp No se enciende durante el corte de energíatage. | No mains power; Battery not charged; Battery faulty; Internal wiring issue. | Check mains power supply; Allow 24 hours for initial battery charge; Replace battery (qualified technician); Contact support. |
| Lamp permanece encendido continuamente | Mains power not connected; Faulty charging circuit. | Verify mains power connection; Contact support. |
| Reduced emergency lighting duration. | Degradación de la batería. | Replace battery (qualified technician). |
Presupuesto
| Característica | Detalle |
|---|---|
| Marca | Beghelli |
| Modelo | 4340F |
| Tipo de producto | Luminaria |
| Flujo luminoso | 100 lúmenes |
| Tipo de bombilla | CONDUJO |
| Fuente de poder | Mains Powered (230V~50Hz) with Built-in Battery |
| Tipo de batería | Pb 4V 3Ah (as per product label) |
| Energy Consumption Class (EU) | 125 lm/W |
| Material | Plástico |
| Color | Blanco |
| Forma | Rectangular |
| Tipo de instalación | Montaje en pared (empotrado) |
| Usos específicos | Exterior |
| Proceso de dar un título | CE |
| Peso del artículo | 1 kilogramos |
Garantía y soporte
Beghelli products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official Beghelli webSitio web o contacte a su distribuidor local. Conserve el recibo de compra como comprobante.
