Thermalright Assassin X 120R SE V2 CPU Cooler Instruction Manual

1. Introducción

The Thermalright Assassin X 120R SE V2 is a high-performance CPU air cooler designed to provide efficient cooling for a wide range of Intel and AMD processors. Featuring a single-tower design with four 6mm copper heat pipes and a 120mm RGB PWM fan, this cooler ensures optimal thermal management while maintaining low noise levels. Its compact 148mm height offers broad compatibility with various PC cases and memory modules.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your Thermalright Assassin X 120R SE V2 CPU Cooler.

2. Especificaciones del producto

Image: Detailed dimensions of the Assassin X 120R SE V2 CPU Cooler, showing length, width, and height for both the heatsink and the fan.

3. Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar la instalación.

• Thermalright Assassin X 120R SE V2 CPU Heatsink
• TL-C12C-L V2 120mm RGB PWM Fan
• Fan Clips (2 sets)
• Intel Mounting Bracket Kit (LGA115X/1200/1700/1851)
• AMD Mounting Bracket Kit (AM4/AM5)
• Compuesto térmico
• Screws and Standoffs for various sockets
• Manual de usuario (este documento)

Imagen: Una sobreview of the Thermalright Assassin X 120R SE V2 CPU Cooler and its included accessories, such as the heatsink, fan, mounting hardware, and thermal paste.

4. Guía de instalación

Before starting, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific details on CPU socket preparation.

4.1. Preparación general

1. Carefully remove your existing CPU cooler.
2. Clean any old thermal paste from the CPU IHS (Integrated Heat Spreader) and the cooler's base using isopropyl alcohol and a lint-free cloth.
3. Remove the protective sticker from the base of the new heatsink.

Imagen: Primer plano view of the heatsink's base, highlighting the four copper heat pipes and AGHP (Anti-Gravity Heat Pipe) Technology, which ensures consistent performance in various mounting orientations.

4.2. Instalación de AMD AM4/AM5

1. Remove the plastic retention brackets from the motherboard, but keep the original motherboard backplate.
2. Install the four red plastic standoffs onto the motherboard's CPU socket screw holes.
3. Place the two metal mounting brackets onto the plastic standoffs, aligning the holes.
4. Secure the metal brackets with the four AM4 screws. Tighten them in a diagonal pattern until snug.
5. Apply a small amount of thermal compound to the center of the CPU IHS.
6. Coloque con cuidado el disipador de calor sobre la CPU, alineando las tuercas de montaje con los tornillos de los soportes.
7. Tighten both nuts on the heatsink with a screwdriver in an alternating fashion until secure.

Image: Comparison of AMD AM4/AM5 and Intel LGA115X/1200/1700 mounting kits, showing the different brackets and standoffs for each platform. Also shows the heatsink's matte black top plate and airflow optimized fins.

4.3. Intel LGA1700/1200/115X/1851 Installation

1. Adjust the mounting hole position on the universal backplate to match your specific Intel socket (e.g., LGA1700 or LGA115X).
2. Install the backplate from the back side of the motherboard, ensuring the holes align with the CPU socket.
3. Install the four blue plastic standoffs onto the motherboard's CPU socket screw holes.
4. Place the two metal mounting brackets onto the plastic standoffs, aligning the holes.
5. Secure the metal brackets with the four appropriate screws (1700 screws for LGA1700, 115X screws for LGA115X/1200/1851). Tighten them in a diagonal pattern until snug.
6. Apply a small amount of thermal compound to the center of the CPU IHS.
7. Coloque con cuidado el disipador de calor sobre la CPU, alineando las tuercas de montaje con los tornillos de los soportes.
8. Tighten both nuts on the heatsink with a screwdriver in an alternating fashion until secure.

4.4. Instalación del ventilador

1. Attach the fan clips to the TL-C12C-L V2 fan.
2. Carefully clip the fan onto the heatsink, ensuring it is securely attached and facing the correct direction for optimal airflow (typically blowing towards the rear of the case).
3. Connect the 4-pin PWM power cable from the fan to the CPU_FAN header on your motherboard.

Image: The Thermalright Assassin X 120R SE V2 CPU Cooler installed on a motherboard, demonstrating its compact design and compatibility with RAM modules.

4.5. Guía de instalación en vídeo

For a visual step-by-step installation guide, please refer to the official video below:

5. Instrucciones de funcionamiento

The Thermalright Assassin X 120R SE V2 CPU Cooler operates automatically once installed and connected to the motherboard's CPU_FAN header.

• Control PWM: The 4-pin PWM fan automatically adjusts its speed based on CPU temperature, as controlled by your motherboard's BIOS/UEFI settings or operating system software. This ensures efficient cooling when needed and quiet operation during lighter loads.
• Iluminación RGB: The fan features self-luminous RGB lighting. The lighting is powered through the same 4-pin fan connector and illuminates automatically upon system power-on. Note that this model typically features a fixed RGB lighting pattern and does not offer software-controlled addressable RGB (ARGB) customization unless specified by your motherboard's capabilities and additional connections (which are not standard for this fan).

Image: Close-up of the TL-C12C-L V2 120mm high-performance fan, showcasing su diseño e iluminación RGB.

6. Mantenimiento

El mantenimiento regular ayuda a garantizar un rendimiento óptimo y la longevidad de su enfriador de CPU.

• Limpieza de polvo: Periodically (every 3-6 months, depending on environment), power off your system and use compressed air to gently blow dust out of the heatsink fins and fan blades. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
• Pasta térmica: Thermal paste typically lasts for several years. If you notice a significant increase in CPU temperatures, consider reapplying fresh thermal paste. This requires carefully removing the heatsink, cleaning old paste, and applying new paste as per installation instructions.
• Inspección del ventilador: Check the fan for any signs of wear, damage, or excessive noise. The S-FDB bearings are designed for durability, but extreme conditions can affect performance.

7. Solución de problemas

Si tiene problemas con el disipador de su CPU, consulte los siguientes problemas y soluciones comunes:

8. Garantía y soporte

Thermalright products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please refer to the official Thermalright websitio o póngase en contacto con su distribuidor local.

Conserve su comprobante de compra para reclamos de garantía.