Manual de instrucciones del motor para sillón reclinable eléctrico Okin JLDQ-11 y JLDQ.11.156.333A

1. Introducción

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Okin Model JLDQ-11 & JLDQ.11.156.333A Power Recliner Motor. This electric actuator is designed as a replacement part for various power recliners and lift chairs. Please read this manual thoroughly before proceeding with installation or use to ensure proper function and safety.

2. Información de seguridad

El cumplimiento de las siguientes pautas de seguridad es fundamental para evitar lesiones y daños al producto.

• Always unplug the power supply before handling the motor. This prevents accidental activation and electrical hazards.
• Be cautious of moving parts when installing or replacing the motor. Keep hands and loose clothing clear.
• Do not exceed the maximum load capacity of 750N push/pull force. Overloading can damage the motor and lead to failure.
• Asegúrese de que todas las conexiones estén seguras y correctamente cableadas antes de restablecer la energía.
• Este producto está destinado únicamente para uso en interiores.

3. Producto terminadoview

The Okin JLDQ.11.156.333A is an original Okin JLDQ series motor designed for power recliners. It features a robust design for reliable performance.

Características principales:

• Constructed with 1 motor and 2 connectors.
• Aspecto: Negro (PA) y Blanco Plata (Aluminio).
• Stroke: 333 mm, designed to move with a slide block.
• Capacidad de carga: Fuerza de empuje: 750 N, Fuerza de tracción: 750 N.
• Frecuencia de operación: Encendido 1 min / Apagado 8 min.
• Tamaño mínimo de instalación (contracción): 156 mm.
• Tamaño máximo de instalación: 489 mm.

Imagen 3.1: De arriba hacia abajo view of the Okin JLDQ.11.156.333A Power Recliner Motor, showing its linear actuator design.

Imagen 3.2: En ángulo view of the Okin JLDQ.11.156.333A motor, highlighting its compact design.

Motor Identification:

The motor's model number is typically located on a label on the motor housing. Verify this matches your existing motor or the required replacement model.

Image 3.3: Close-up of the motor label, clearly showing the model number JLDQ.11.156.333A and serial number QPO01348 00001.

Detalles del conector:

The actuator motor set includes two types of connectors:

• A 5-pin inside-the-motor round plug for the switch hand control.
• A 2-pin square plug for the power supply.

Image 3.4: Illustration of the 5-pin round plug for hand control and the 2-pin square plug for power supply.

4. Especificaciones técnicas

5. Compatibilidad y aplicación

This Okin JLDQ.11.156.333A motor is specifically designed to replace the original Okin JLDQ.11.156.333A model. It can also serve as a replacement for JLDQ.11.156.333 and JLDQ.11.156.333D series motors.

Importante: Different actuator/motors may not be compatible with all recliner frames. The frame has specific requirements for the actuator's minimum installation dimension, stroke, and plug types. Always verify your existing motor's brand, model, stroke, and connector types against the specifications provided in this manual before purchasing e instalación.

6. Guía de instalación

Installation of the Okin recliner motor is generally straightforward for individuals with basic mechanical aptitude. However, if you are unsure, it is recommended to seek professional assistance.

Herramientas necesarias:

• Juego de llaves de tubo
• Llaves hexagonales (llaves Allen)
• Pliers (optional, for cable management)

Pasos de instalación:

1. Desconectar la energía: Ensure the recliner is completely unplugged from the wall outlet.
2. Position Recliner: Carefully turn the recliner over or tilt it back to access the motor assembly.
3. Desconecte el motor viejo: Disconnect the power supply and hand control cables from the old motor. Note their positions for re-connection.
4. Quitar el motor viejo: Using appropriate tools, unbolt the old motor from the recliner frame. Retain all existing bolts, nuts, and washers as the new unit typically does not include mounting hardware.
5. Instalar motor nuevo: Position the new Okin JLDQ.11.156.333A motor in the same location as the old one. Secure it to the recliner frame using the retained hardware. Ensure it is firmly attached.
6. Conectar cables: Connect the 5-pin round plug from the hand control to the corresponding port on the motor. Connect the 2-pin square plug from the power supply to its designated port. Ensure connections are snug.
7. Funcionalidad de prueba: Carefully return the recliner to its upright position. Plug the recliner back into a power outlet. Test the hand control to ensure the motor operates smoothly through its full range of motion.
8. Comprobación final: Inspect all connections and mounting points to ensure everything is secure before regular use.

7. Operación

Once installed and connected, the Okin JLDQ.11.156.333A power recliner motor operates via the recliner's hand control. Pressing the appropriate buttons on the hand control will extend or retract the linear actuator, moving the recliner mechanism.

• Ensure the recliner is plugged into a functional power outlet.
• Use the hand control buttons to adjust the recliner to your desired position.
• Avoid continuous operation for more than 1 minute to prevent overheating. Allow an 8-minute rest period after 1 minute of continuous use.

8. Mantenimiento y cuidado

El mantenimiento regular ayuda a garantizar la longevidad y el buen funcionamiento del motor de su sillón reclinable Okin.

• Limpieza: Wipe clean the motor and surrounding areas with a dry or slightly damp Paño. No utilice productos químicos agresivos ni limpiadores abrasivos. Asegúrese de que no entren líquidos en la carcasa del motor.
• Inspección: Periodically check all electrical connections for looseness or damage. Inspect the motor's mounting bolts to ensure they remain tight.
• Lubricación: The motor is factory-lubricated and generally does not require additional lubrication. If you notice unusual friction or noise, consult a professional.
• Cable de alimentación: Ensure the power cord is not pinched, cut, or damaged. Replace if necessary.

9. Solución de problemas comunes

If your recliner motor is not functioning as expected, follow these troubleshooting steps:

1. Sin energía:
   • Check if the recliner is securely plugged into a working electrical outlet.
   • Verify the power supply unit (transformer) is receiving power and its indicator light (if present) is on.
   • Inspeccione el cable de alimentación en busca de daños visibles.
2. Motor Not Responding to Hand Control:
   • First, troubleshoot the hand control switch. Ensure its cable is securely connected to the motor.
   • If possible, test the hand control with a known working motor or test the motor with a known working hand control to isolate the issue.
   • Check the 5-pin round plug connection for any looseness or damage.
3. El motor hace ruido pero no se mueve:
   • Ensure there are no obstructions preventing the recliner mechanism from moving.
   • Check if the motor's mounting bolts are too tight, causing binding.
   • Verify the motor's stroke is not fully extended or retracted and hitting a limit.
4. Operación intermitente:
   • Check all connections for intermittent contact.
   • Ensure the motor is not overheating due to continuous use (refer to operation frequency).

Si estos pasos no resuelven el problema, comuníquese con el servicio de atención al cliente para obtener más ayuda.

10. Garantía y atención al cliente

Información de garantía:

This Okin recliner motor is covered by a manufacturer's warranty. Please refer to the product packaging or contact the seller for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.

Atención al cliente:

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller or the manufacturer directly. Provide your product model number (JLDQ.11.156.333A) and serial number (if available) when seeking support.

You can visit the Okin store for more information: Tienda Okin en Amazon