Okin Dual Motor 3 Stage Electric Standing Desk Frame (Model B0CBM116NB)

Okin Dual Motor 3-Stage Electric Standing Desk Frame User Manual

Model: Dual Motor 3 Stage Electric Standing Desk Frame (B0CBM116NB)

1. Introducción

This manual provides instructions for the assembly, operation, and maintenance of your Okin Dual Motor 3-Stage Electric Standing Desk Frame. This product is designed to provide an adjustable height base for your chosen desktop. Please note that this package includes the desk frame only; a desktop surface is not included and must be acquired separately.

The frame is compatible with tabletops ranging from 47.2 inches to 78.7 inches in length, 23.6 inches to 33.5 inches in width, and a suggested thickness of 0.7 inches to 1.2 inches.

2. Información de seguridad

  • Límite de peso: Do not exceed the maximum weight capacity of 270 lbs (122 kg) on the desk frame. Exceeding this limit can cause damage to the frame and potential injury.
  • Anti-collision Function: The desk frame includes an anti-collision feature. For this function to operate correctly, the control box must be fixed horizontally during and after installation. If the control box is not horizontal, the desk may not move up or down as intended.
  • Asamblea: Follow all assembly instructions carefully. Use caution when handling heavy components to prevent injury.
  • Fuente de energía: Ensure the power supply meets the product's specifications. Do not use damaged power cords or plugs.
  • Niños y mascotas: Mantenga a los niños y a las mascotas alejados del escritorio durante su funcionamiento para evitar accidentes.

3. Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar el ensamblaje:

  • Desk Frame Components (legs, crossbars, feet)
  • Sistema de motor dual
  • Caja de control
  • Controlador de teléfono
  • Cable de alimentación
  • Herrajes de montaje (tornillos, llaves, abrazaderas para cables)
  • Manual de instrucciones

4. Configuración y montaje

Follow these steps to assemble your electric standing desk frame. It is recommended to have two people for assembly due to the weight of the components.

  1. Desempaquetar componentes: Retire con cuidado todas las piezas del embalaje y colóquelas sobre una superficie limpia y plana. Consulte la lista de contenido del paquete.
  2. Ensamblar patas y travesaños: Attach the lifting columns to the feet. Connect the crossbars to the lifting columns. The frame width is adjustable from 46.5 inches to 74 inches to accommodate various desktop sizes. Adjust the crossbars to match the length of your chosen desktop.
Diagram showing the adjustable length of the desk frame base and recommended tabletop dimensions.

Figure 1: Adjustable Length Retractable Base and Recommended Tabletop Sizes

  1. Instalar la caja de control y los motores: Securely mount the control box to the frame, ensuring it is perfectly horizontal for proper anti-collision function. Connect the dual motors to the control box.
De cerca view of the heavy-duty desk frame construction, highlighting the dual motor and control box.

Figure 2: Heavy-Duty Desk Frame Construction with Dual Motor System

  1. Attach Handset Controller: Mount the handset controller to the underside of your desktop or a convenient location on the frame. Connect it to the control box.
  2. Adjuntar escritorio: Carefully place your chosen desktop onto the assembled frame. Secure the desktop to the frame using appropriate screws (not included, as desktop types vary). Ensure the desktop is centered and stable.
  3. Ajuste las almohadillas de los pies: The desk features adjustable feet pads to protect your floor and ensure stability on uneven surfaces. Adjust them as needed to level the desk.
Close-up of an adjustable foot pad on the desk base.

Figure 3: Adjustable Feet Pad for Stability

  1. Sistema de organización de cables: Use the provided adhesive cable clips to organize and secure all cables, preventing them from snagging or interfering with desk movement.

5. Instrucciones de funcionamiento

The Okin Electric Standing Desk Frame features a smart controller for easy height adjustment.

5.1 Handset Controller Functions

Diagram of the smart controller handset with labels for Up & Down buttons, LED Digital Display, 3 Height Preset Buttons, and Setting Button.

Figure 4: Smart Controller Handset

  • Botones arriba/abajo (▲ / ▼): Press and hold to raise or lower the desk to your desired height. The desk moves at approximately 1.4 inches per second.
  • Pantalla digital LED: Muestra la altura actual del escritorio en pulgadas.
  • Botones de memoria (1, 2, 3): Estos botones le permiten guardar y recuperar hasta tres configuraciones de altura preferidas.
  • Botón de configuración (M): Used to save a custom height to a memory preset.

5.2 Configuración de ajustes preestablecidos de memoria

  1. Ajuste el escritorio a la altura deseada utilizando los botones Arriba/Abajo.
  2. Press the 'M' (Setting) button. The LED display will show 'S-'.
  3. Within 3 seconds, press one of the memory buttons (1, 2, or 3). The current height will be saved to that button.
  4. Para recuperar una altura guardada, simplemente presione el botón de memoria correspondiente (1, 2 o 3). El escritorio se moverá automáticamente a la posición guardada.

5.3 Función anticolisión

The anti-collision function uses a gyroscope to detect changes in the desk's angle, indicating an obstruction. If an obstruction is detected during movement, the desk will automatically reverse direction slightly to prevent damage.

  • Activación/Desactivación: A small button on the side of the handset part controls the anti-collision function. Press this button to toggle the function on or off.
  • Importante: Ensure the control box is fixed horizontally during installation for this function to work correctly.
Image illustrating the anti-collision function, showing the desk reversing upon encountering an obstacle.

Figure 5: Anti-Collision Function in Action

6. Mantenimiento

  • Limpieza: Limpie el marco del escritorio con un paño suave.amp paño. Evite utilizar productos químicos agresivos o limpiadores abrasivos que puedan dañar el acabado.
  • Controles periódicos: Revise periódicamente todos los tornillos y conexiones para asegurarse de que estén bien apretados. Vuelva a apretarlos si es necesario.
  • Inspección de cables: Inspect power cables and motor connections for any signs of wear or damage. Replace immediately if damage is found.

7. Solución de problemas

If you encounter issues with your desk frame, refer to the following common problems and solutions:

ProblemaPosible causaSolución
El escritorio no se mueve.Power cable disconnected; Control box not horizontal; Overload.Check power connections; Ensure control box is horizontal; Reduce weight on desk.
El escritorio se mueve de manera desigual o hace ruidos inusuales.Conexiones sueltas; Obstrucción; Distribución desigual del peso.Check all connections; Remove any obstructions; Distribute weight evenly.
Anti-collision function not working.Control box not horizontal; Function deactivated.Ensure control box is fixed horizontally; Activate function via handset button.
La pantalla LED muestra un código de error.Error específico del sistema.Refer to the full troubleshooting guide (if available) or contact customer support. Often, a power cycle (unplug and replug) can resolve temporary errors.

Si el problema persiste después de intentar estas soluciones, comuníquese con el servicio de atención al cliente.

8. Especificaciones

CaracterísticaEspecificación
MarcaOkin
ModeloDoble motor 3Stage Electric Standing Desk Frame
Rango de ajuste de altura23.7" - 49.3" (60.2 cm - 125.2 cm)
Rango de ajuste de ancho46.5" - 74" (118.1 cm - 188 cm)
Recommended Tabletop Length47.2" - 78.7" (119.9 cm - 199.9 cm)
Ancho de mesa recomendado23.6" - 33.5" (59.9 cm - 85.1 cm)
Recommended Tabletop Thickness0.7" - 1.2" (1.8 cm - 3 cm)
Capacidad máxima de peso270 libras (122 kg)
Velocidad de elevación1.4" per second (3.5 cm/s)
Tipo de motorMotor dual
Piernastages3-Tier
MaterialAcero aleado
ColorBlanco
Características especialesAnti-collision function, 3 memory presets

9. Información de garantía

Okin products are manufactured with quality and durability in mind. This product is covered by a limited warranty against manufacturing defects. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your purchase or contact Okin customer support.

10. Atención al cliente

If you have any questions, require assistance with assembly, or need troubleshooting support that is not covered in this manual, please contact Okin customer service. You can typically find contact information on the product packaging, the official Okin websitio, o a través de su minorista.

For the latest information and support, visit the Okin store on Amazon: Tienda Okin

Documentos relacionados - Doble motor 3Stage Electric Standing Desk Frame (Model B0CBM116NB)

Preview Sistema de doble columna OKIN S2-2#: Manual de instrucciones y guía de funcionamiento
Guía completa del sistema de doble columna OKIN S2-2#. Aprenda a utilizarlo, establecer límites, solucionar errores y comprender las especificaciones técnicas de su escritorio de altura ajustable.
Preview Manual de usuario del sistema de control remoto OKIN RF.31.24.01
Manual de usuario completo para el sistema de control remoto de 22 teclas OKIN RF.31.24.01, que detalla las funciones de los botones, los procedimientos de ajuste de posición y los componentes del sistema para camas ajustables.
Preview Guía de solución de problemas de Okin Systems: Reparación y mantenimiento de sillones elevadores
Guía completa de solución de problemas para sistemas Okin utilizados en sillones elevadores. Aprenda a diagnosticar y solucionar problemas comunes con controles manuales, transformadores, motores y tuercas de husillo. Incluye consejos de instalación.
Preview Manual de instrucciones de la caja de control OKIN CB1522
Guía completa de la caja de control OKIN CB1522, que detalla su configuración eléctrica, funcionamiento del motor (cabezal, pie), funciones de masaje, iluminación bajo la cama, procedimientos de emparejamiento y conectividad Bluetooth. Incluye información de cumplimiento con las normas FCC e ISED.
Preview Manual de funcionamiento del sistema de control remoto de tecnología eléctrica refinada OKIN
Este manual proporciona instrucciones de funcionamiento detalladas para el sistema de control remoto OKIN Refined Electric Technology, que abarca descripciones de botones, configuraciones de posiciones especiales y procedimientos de emparejamiento inalámbrico.
Preview Guía de instrucciones y funcionamiento de la caja de control OKIN CB3433A
Este documento proporciona instrucciones detalladas de funcionamiento para la caja de control OKIN CB3433A, un componente para sistemas de mobiliario ajustable fabricado por OKIN, una empresa de Phoenix Mecano. Describe la configuración eléctrica, la interfaz de la caja de control y el funcionamiento de varios actuadores (cabezal, pie, lumbar), motores de masaje e iluminación RGB bajo la cama. La guía también abarca los indicadores LED, los procedimientos de emparejamiento, las opciones de conectividad (SYNC, USB, UART), los requisitos de alimentación e incluye advertencias regulatorias de la FCC y el ISED RSS. Escrito por Jarek, de la División de I+D.