Manual del usuario del reloj despertador electrónico Mebus modelo 785871

Introducción

This manual provides detailed instructions for the setup, operation, and maintenance of your Mebus Electronic Alarm Clock, Model 785871. Please read this manual thoroughly before using the device to ensure proper function and longevity.

The Mebus Electronic Alarm Clock is a digital, radio-controlled device designed to provide accurate time, date, and temperature readings, along with reliable alarm functions. Its modern design and clear display make it suitable for various room types, especially bedrooms.

Contenido del paquete

• Mebus Electronic Alarm Clock (Model 785871)
• Manual de usuario (este documento)

Nota: Las baterías no están incluidas y deben comprarse por separado.

Configuración

1. Instalación de la batería

1. Localice la tapa del compartimiento de la batería en la parte posterior del reloj despertador.
2. Deslice o desenganche la tapa para abrir el compartimento.
3. Inserte las pilas necesarias (por ejemplo, 2 x AAA) de acuerdo con los indicadores de polaridad (+ y -) dentro del compartimento.
4. Vuelva a colocar la tapa del compartimiento de la batería de forma segura.

Important: Ensure correct battery polarity to prevent damage to the device.

2. Initial Power On and Radio Controlled Time Synchronization

Upon battery installation, the clock will power on and automatically begin searching for the radio time signal. This process may take several minutes to an hour, depending on your location and signal strength.

• Place the clock near a window or in an open area for optimal signal reception.
• A signal icon (often a radio tower or wave symbol) on the display will flash during synchronization and become solid once the time is successfully set.
• If synchronization fails, the clock will typically default to a standard time (e.g., 12:00 AM) and you may need to set the time manually (see "Setting Time Manually" in the Operating section).

Figura 1: Frente view of the Mebus Electronic Alarm Clock, showing the digital display with time, date, day, and temperature, along with control buttons.

Instrucciones de funcionamiento

1. Button Overview

The clock features several buttons for control. The main buttons are typically:

• Botones SET: Used to enter setting modes for time, alarm, etc. There are two 'SET' buttons, likely for different functions or for confirming settings.
• Botón MODE: Cycles through display modes or setting options.
• ▲ / ▼ buttons: Adjust values (increase/decrease) during setting modes.

Figura 2: Angulado view of the Mebus Electronic Alarm Clock, highlighting the arrangement of the control buttons below the digital display.

2. Setting Time Manually (if radio control is unavailable)

1. Press and hold the appropriate COLOCAR button (refer to specific button labels on your device, often labeled "TIME SET" or similar) until the time display flashes.
2. Utilice el ▲ y ▼ Botones para ajustar las horas.
3. Presione el COLOCAR button again to move to minutes, then use ▲ y ▼ Para ajustar.
4. Continuar presionando COLOCAR to cycle through other settings like year, month, and day, adjusting each with ▲ y ▼.
5. Presione el COLOCAR button one last time or wait a few seconds for the clock to exit setting mode.

3. Configuración de la alarma

1. Mantenga pulsado el COLOCAR button associated with the alarm function (often indicated by an alarm icon or "ALARM SET"). The alarm time will flash.
2. Utilice el ▲ y ▼ Botones para configurar la hora de alarma deseada.
3. Pulsa la alarma COLOCAR button again to move to minutes, then use ▲ y ▼ Para ajustar.
4. Pulsa la alarma COLOCAR button one last time or wait for the clock to exit setting mode.
5. To activate/deactivate the alarm, there is usually a dedicated switch or button (often on the side or back, or a quick press of an alarm SET button). Look for an alarm icon on the display to confirm activation.

4. Función de repetición

When the alarm sounds, press the large button on the top of the clock (if present, or a designated snooze button) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes). To turn off the alarm completely, press any other button or flip the alarm switch off.

5. Display Modes and Temperature Unit Selection

• Modos de visualización: Presione el MODO button to cycle through different display information, such as time, date, and potentially other features.
• Unidad de temperatura: To switch between Celsius (°C) and Fahrenheit (°F) for the temperature display, locate a small button or switch, often on the back or side of the unit, or it might be an option within the MODO ajustes.

Mantenimiento

1. Limpieza

• Limpie el exterior del reloj con un paño suave y seco.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or electronic components.
• Evite que entre humedad en las aberturas.

2. Reemplazo de la batería

• Cuando la pantalla se oscurece o las funciones se vuelven erráticas, es momento de reemplazar las baterías.
• Follow the "Battery Installation" steps in the Setup section.
• Deseche las baterías viejas de manera responsable de acuerdo con las regulaciones locales.

Solución de problemas

Presupuesto

• Marca: Mebus
• Número de modelo: 785871 (also known as Mebus 25800)
• Tipo de pantalla: Digital
• Estilo: Moderno
• Característica especial: Alarma
• Fuente de energía: Funciona con pilas (pilas no incluidas)
• Tipo de habitación: Dormitorio
• Forma: Square-ish
• Material: Plástico
• Dimensiones: 5.12 x 2.95 x 2.13 pulgadas (Dimensiones del paquete)
• Peso del artículo: 4.9 onzas

Apoyo

For further assistance or inquiries not covered in this manual, please refer to the Mebus official website or contact their customer support. Keep your product model number (785871) handy when seeking support.

Note: Specific contact details are not provided in this document.