1. Introducción
The AudioQuest PowerQuest 707 is a high-performance 12-outlet power conditioner and non-sacrificial surge protector designed to optimize the performance and protect your valuable audio/video equipment. It features advanced noise-dissipation technologies and robust surge protection to ensure clean, stable power delivery.
Figura 1: Frente view of the AudioQuest PowerQuest 707.
2. Configuración e instalación
2.1 Colocación
The PowerQuest 707 features a rack-mountable design, allowing for seamless integration into standard home theater A/V racks. Ensure adequate ventilation around the unit.
2.2 Conexión a la alimentación
- Ensure the PowerQuest 707's power switch is in the APAGADO posición.
- Connect the supplied PQ-715 detachable power cable to the IEC inlet on the rear of the PowerQuest 707.
- Plug the flat-to-wall 45° plug of the power cable into a grounded AC wall outlet. The flat-to-wall design facilitates installation in tight spaces.
Figura 2: Posterior view of the PowerQuest 707 showing the IEC inlet and various outlets.
2.3 Conexión de su equipo
The PowerQuest 707 features two types of outlets:
- 4x High-Current Outlets: These outlets are specifically designed for power ampelevadores, integrados amplifiers, powered receivers, and powered subwoofers. They minimize AC impedance to the amplifier power supply for optimal performance.
- 8x Ultra-Linear-Filtered Outlets: These outlets are designed for source devices such as CD players, turntables, TVs, and streamers. They are isolated from the High-Current outlets to effectively manage noise.
Connect your audio/video components to the appropriate outlets. Ensure all connections are secure.
3. Operación
3.1 Encendido / Apagado
Once all connections are made, flip the power switch on the front panel to the ON position. The "Protection On" indicator light should illuminate.
Figure 3: Front panel detail showing the power switch and indicator lights.
3.2 Luces indicadoras
- Protection On: This light indicates that the surge protection circuitry is active and functioning correctly.
- sobrevoltajetagy Protección: Esta luz se ilumina si el volumen de CA entrantetage exceeds a safe threshold (140VAC). The unit will automatically shut down power to connected devices and reset once the voltagy vuelve a un rango seguro.
3.3 Tecnologías clave
- Protección contra sobretensiones sin sacrificio: The PowerQuest 707 can withstand multiple transient power surges and spikes up to 6000V or 3000A without damage. This protection is designed to be robust and does not degrade over time.
- Disipación de ruido ultralineal: This technology provides wide-bandwidth linear filtration across more than 20 octaves, ensuring consistent noise reduction. This contributes to a quieter background and enhanced audio/video clarity.
- Transient-Power Correction: A low-impedance circuit provides a reservoir of 45 amps (peak, up to 25mS) for current-starved amplification components. This ensures uncompressed current on demand, improving dynamic contrasts.
4. Mantenimiento
El AudioQuest PowerQuest 707 requiere un mantenimiento mínimo.
- Mantenga la unidad limpia con un paño suave y seco. Evite usar limpiadores líquidos o disolventes.
- Asegúrese de que las aberturas de ventilación no estén obstruidas.
- There are no user-serviceable parts inside the PowerQuest 707. Do not attempt to open the chassis.
5. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| "Protection On" light is off. | Unit is not powered on, or there is no AC input. | Ensure the power switch is ON. Check that the power cable is securely connected to both the unit and a live AC wall outlet. |
| "Sobrevoltage Protection" light is illuminated. | Vol CA entrantetage es demasiado alto. | The unit has automatically shut down. It will reset once the voltage returns to a safe range. If the problem persists, consult an electrician. |
| No hay energía en los dispositivos conectados. | PowerQuest 707 is off, or devices are not properly connected. | Verify the PowerQuest 707 is powered on and the "Protection On" light is illuminated. Check that all device power cables are securely plugged into the PowerQuest 707 outlets. |
| No perceived improvement in audio/video performance. | Perception of improvement can vary based on existing electrical conditions and connected equipment. | Ensure all components are connected to the appropriate outlets (High-Current vs. Ultra-Linear-Filtered). Allow time for your system to acclimate. |
6. Especificaciones
Figura 4: De arriba hacia abajo view of the PowerQuest 707, highlighting front and rear features.
- Modelo: POWERQ707
- Salidas: 12 (4x High-Current, 8x Ultra-Linear-Filtered)
- Protección contra sobretensiones sin sacrificio: Withstands multiple strikes up to 6000V / 3000A
- Volúmenes extremostage Apagado: Activates at 140VAC, resets automatically
- Transient-Power Correction: 45 amppico de s (hasta 25mS)
- Dimensiones del producto: 14.9 x 17 x 3.7 pulgadas (37.8 x 43.2 x 9.4 cm)
- Peso del artículo: 16.7 libras (7.57 kg)
- Material: Metal
- Dispositivos compatibles: Desktop, Server (and other audio/video components)
- Cable de energía: PQ-715 2m Detachable Power Cable with Flat-to-Wall Plug
7. Garantía y soporte
7.1 Información de garantía
For detailed warranty information, please refer to the warranty card included with your product or visit the official AudioQuest webSitio. Conserve su comprobante de compra para reclamaciones de garantía.
7.2 Soporte técnico
If you encounter any issues not covered in this manual or require further assistance, please contact AudioQuest customer support. Contact details can typically be found on the AudioQuest websitio o en el embalaje del producto.
