Manual del usuario de cuchillas de repuesto WORKPRO para tijeras de césped y recortadoras de arbustos de 7.2 V (modelos W124793AE / W125106AE)

1. Introducción

This manual provides instructions for the proper installation, maintenance, and care of your WORKPRO Replacement Blades (Model W124793AE). These blades are designed specifically for use with the WORKPRO 7.2V Grass Shear and Shrubbery Trimmer (Model W125106AE). Adhering to these guidelines will ensure optimal performance and extend the lifespan of your blades.

2. Información de seguridad

Always ensure the main power tool (WORKPRO 7.2V Trimmer) is turned OFF and the battery is removed before attempting to install, remove, or clean the blades.
Wear appropriate personal protective equipment, including gloves and eye protection, when handling blades.
Blades are sharp. Handle with extreme care to prevent injury.
Mantenga las cuchillas fuera del alcance de los niños.
Only use genuine WORKPRO replacement blades for your tool. Using non-compatible blades may result in damage to the tool or injury.

3. Configuración e instalación

Follow these steps to safely replace the blades on your WORKPRO 7.2V Grass Shear and Shrubbery Trimmer.

Prepare la recortadora: Ensure the WORKPRO 7.2V Trimmer (Model W125106AE) is turned off and the battery pack is removed. Place the trimmer on a stable, flat surface.
Remove Existing Blade: Depending on your trimmer model, there may be a release button or screws securing the blade assembly. Refer to your trimmer's original manual for specific instructions on detaching the worn blade. Carefully remove the old blade, handling it by the non-sharp edges.
Instalar nueva cuchilla: Align the new WORKPRO Replacement Blade (Model W124793AE) with the mounting mechanism on the trimmer. Ensure all tabs and slots are correctly engaged.
Asegure la cuchilla: Press firmly or re-engage any locking mechanisms until the blade is securely in place. If screws were removed, reinsert and tighten them appropriately. Gently tug on the blade to confirm it is firmly attached and does not wobble.

De cerca view of the WORKPRO replacement blade assembly, showing the attachment mechanism and the grass shear blade design. — Figure 1: WORKPRO Replacement Blade Assembly. This image displays the underside of the blade assembly, highlighting the attachment points and the design of the grass shear blades.

4. Operating with New Blades

Once the replacement blades are securely installed, you can resume operation of your WORKPRO 7.2V Grass Shear and Shrubbery Trimmer. Always refer to the main trimmer manual for detailed operating instructions and safety precautions.

Hoja de corte de césped: Ideal for trimming grass around obstacles, edging lawns, and maintaining small areas.
Shrubbery Trimmer Blade: Suitable for shaping and trimming small hedges, shrubs, and bushes.

A hand wearing a green glove operating a green WORKPRO 7.2V grass shear trimmer, cutting grass in a garden. — Figure 2: WORKPRO 7.2V Trimmer in use with the grass shear blade. This image shows the trimmer being used to cut grass, demonstrating its application.

A hand wearing a green glove operating a green WORKPRO 7.2V shrubbery trimmer, shaping a green bush. — Figure 3: WORKPRO 7.2V Trimmer in use with the shrubbery blade. This image illustrates the trimmer being used to trim a bush, showcasing su versatilidad.

5. Mantenimiento y almacenamiento

Proper maintenance is essential for the longevity and performance of your WORKPRO Replacement Blades.

Limpieza: After each use, ensure the blades are cleaned thoroughly. Remove any grass clippings, sap, or debris using a stiff brush or cloth. Avoid using harsh chemicals that could damage the blade material.
El secado: It is crucial to keep the blades dry during storage. Moisture can lead to rust and corrosion, which will dull the blades and reduce their effectiveness. Wipe them dry immediately after cleaning.
Lubricación: Periodically apply a light coat of machine oil or blade lubricant to the blades to prevent rust and ensure smooth operation.
Afilado: Over time, blades will naturally dull. If cutting performance decreases significantly, the blades may need sharpening. This should be done by a qualified professional or with appropriate sharpening tools, following safety guidelines. Alternatively, replace with new WORKPRO blades.
Almacenamiento: Store the blades in a dry, secure location, away from moisture and out of reach of children. If storing separately from the trimmer, use the original packaging or a protective sheath.

6. Solución de problemas

Las cuchillas no cortan eficazmente:
- Check if blades are dull. Sharpen or replace if necessary.
- Ensure blades are clean and free of debris.
- Verify blades are correctly installed and securely fastened.
Blades making unusual noise or vibrating:
- Turn off the trimmer and remove the battery. Inspect blades for damage or bending. Replace if damaged.
- Ensure blades are properly seated and tightened.
Blades do not fit the trimmer:
- Confirm that you have the correct replacement blades (Model W124793AE) for your WORKPRO 7.2V Grass Shear and Shrubbery Trimmer (Model W125106AE).

7. Especificaciones

Blade Model: W124793AE
Compatible Trimmer Model: WORKPRO 7.2V Grass Shear and Shrubbery Trimmer (W125106AE)
Material: Acero aleado
Dimensiones del producto: Approximately 3.82"L x 0.87"W x 6.69"H (for the blade assembly)
Peso del artículo: Aproximadamente 8.1 onzas
Código postal: 820909692881
Fabricante: Compañía Industrial Hangzhou Greatstar Ltd.

8. Garantía y soporte

For warranty information regarding your WORKPRO Replacement Blades or the WORKPRO 7.2V Grass Shear and Shrubbery Trimmer, please refer to the documentation included with your original trimmer purchase or visit the official WORKPRO website. For technical support or further assistance, please contact WORKPRO customer service through their official channels.

	Manual de usuario de la recortadora de césped y arbustos inalámbrica WORKPRO PLYL-98 de 7.2 V Instrucciones de funcionamiento y guía de seguridad oficiales para la desbrozadora y recortadora de arbustos inalámbrica WORKPRO de 7.2 V (modelo PLYL-98). Conozca sus características, mantenimiento y uso seguro.
	Manual de instrucciones de la tijera cortacésped y recortadora de arbustos inalámbrica WORKPRO de 7.2 V Instrucciones de uso oficiales de la tijera cortacésped y recortadora de arbustos inalámbrica WORKPRO de 7.2 V (modelos W159029A, W159032A y W159035A). Esta guía abarca la seguridad, el uso correcto, el mantenimiento y las especificaciones técnicas para un mantenimiento eficiente del jardín.
	Manual del usuario de la tijera cortacésped y recortadora de arbustos inalámbrica WORKPRO de 7.2 V Instrucciones completas de funcionamiento y guía de seguridad para las tijeras cortacésped y recortadoras de arbustos inalámbricas WORKPRO W159031A y W159037A de 7.2 V. Aprenda sobre el uso correcto, el mantenimiento, la carga y las precauciones de seguridad.
	Tijeras de césped y cortasetos inalámbricas WORKPRO de 12 V - Instrucciones de funcionamiento originales Instrucciones de uso oficiales de la tijera cortacésped y recortadora de arbustos inalámbrica WORKPRO W159039A de 12 V, que abarcan seguridad, uso, mantenimiento y eliminación. Incluye especificaciones técnicas y una guía del indicador de carga.
	Tijeras de césped y cortasetos inalámbricas WORKPRO: Instrucciones de uso y guía de seguridad Instrucciones detalladas de funcionamiento, advertencias de seguridad, especificaciones técnicas y pautas de mantenimiento para la tijera cortacésped y recortadora de arbustos inalámbrica WORKPRO (modelos W159020A, W159023A, W159026A). Aprenda a usar, cargar y mantener su herramienta de jardinería de forma segura.
	Cortadora de césped y arbustos inalámbrica WORKPRO W159039A de 12 V: Instrucciones de uso Instrucciones de uso oficiales de la tijera cortacésped y recortadora de arbustos inalámbrica WORKPRO W159039A de 12 V. Aprenda sobre el uso seguro, el mantenimiento y las especificaciones técnicas de su herramienta de jardinería.

WORKPRO W124793AE

WORKPRO Replacement Blades User Manual