Introducción
This manual provides essential information for the safe and proper installation, operation, and maintenance of your Veepeak 30 Amp Flanged Outlet NEMA L14-30R Locking Receptacle. Please read all instructions carefully before installation and use. Retain this manual for future reference.
Información de seguridad
ADVERTENCIA: Electrical shock hazard. Improper installation or use can result in serious injury or death. Always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.
- Desconecte siempre la alimentación del disyuntor o de la caja de fusibles antes de instalar o realizar mantenimiento a este dispositivo.
- Ensure all wiring connections are secure and correct according to the wiring diagram and local codes.
- No exceda las clasificaciones eléctricas especificadas del dispositivo.
- This product is designed for use with NEMA L14-30P compatible plugs only.
- Keep the weatherproof cap closed when the outlet is not in use to protect against moisture and dust.
Contenido del paquete
- 1 x Veepeak 30 Amp NEMA L14-30R Flanged Outlet
- Tornillos de instalación
Presupuesto
| Especificación | Valor |
|---|---|
| Ampanhelo | 30 Amps |
| Volumentage | 125/250 voltios CA |
| Configuración NEMA | L14-30R |
| Postes / Cables | 3 polos, 4 cables de conexión a tierra |
| Carga máxima | 7500 vatios |
| Calibre de cable recomendado | 10 AWG/4C |
| Material | Cloruro de polivinilo (PVC) |
| Certificaciones | ETL Listed (Conforms to UL & CSA standards) |
| Tamaño de agujero requerido | 2.5 pulgadas |
Configuración e instalación
Herramientas necesarias: Screwdriver, wire strippers, drill (for mounting hole), appropriate drill bit.
- Preparar la ubicación de montaje: Choose a suitable, dry location for installation. Drill a 2.5-inch diameter hole for the receptacle body. Ensure there is enough space behind the mounting surface for wiring connections.
- Conexiones de cableado:
Refer to the wiring diagram below and the color-coded terminals on the back of the receptacle. Strip approximately 1/2 inch of insulation from each wire. Insert the wires into the corresponding terminals and tighten the screws securely. Ensure no bare wire strands are exposed outside the terminals.
Imagen: Trasera view of the L14-30R outlet, displaying the four color-coded terminals for wiring connections (Green for Ground, White for Neutral, Red and Black for Hot).
Image: NEMA L14-30R configuration diagram. 'X' and 'Y' are hot lines (125V each to neutral, 250V between them), 'W' is neutral, and 'G' is ground.
- Green (G): Cable de tierra.
- Blanco (An): Cable neutral.
- Black (X): Hot wire (Line 1).
- Red (Y): Hot wire (Line 2).
- Monte el receptáculo: Insert the receptacle body into the drilled hole. Secure the flanged outlet to the mounting surface using the provided screws. Ensure it is flush and stable.
- Restaurar energía: Una vez completada la instalación y verificadas todas las conexiones, restablezca la energía en el disyuntor.
Imagen: Frente view of the Veepeak L14-30R flanged outlet with its weatherproof cap open, revealing the NEMA L14-30R locking receptacle.
Instrucciones de funcionamiento
- Abriendo la tapa: Lift the weatherproof cap to access the receptacle.
- Conexión de un enchufe: Align the NEMA L14-30P plug with the receptacle. Insert the plug and twist clockwise to lock it into place. Ensure the plug is fully seated and locked.
- Desconectar un enchufe: Twist the plug counter-clockwise to unlock, then pull it straight out from the receptacle.
- Closing the Cap: When the outlet is not in use, ensure the weatherproof cap is securely closed over the receptacle to protect it from environmental elements like rain, snow, and dust.
Imagen: Frente view of the Veepeak L14-30R flanged outlet with its weatherproof cap securely closed, providing protection.
Mantenimiento
El mantenimiento regular garantiza un rendimiento y una seguridad óptimos.
- Limpieza: Periodically clean the exterior of the outlet with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the cap is closed during cleaning.
- Inspección: Regularly inspect the outlet for any signs of damage, wear, or corrosion. Check the weatherproof cap for proper sealing.
- Verificación de conexión: Annually, or if issues arise, disconnect power and check the wiring connections for tightness. Loose connections can cause overheating.
Solución de problemas
- Sin energía:
- Check the circuit breaker or fuse for the circuit. Reset if tripped.
- Verifique que la fuente de alimentación esté activa.
- Asegúrese de que el enchufe esté completamente insertado y bloqueado en el receptáculo.
- Conexión suelta:
- If the plug feels loose or power is intermittent, disconnect power and inspect the wiring connections at the back of the receptacle for tightness.
- Inspect the plug on the appliance for damage.
- Damage to Outlet:
- If the outlet housing or terminals show signs of damage, cracking, or burning, discontinue use immediately and replace the unit.
Si los pasos de solución de problemas no resuelven el problema, consulte a un electricista calificado.
Garantía y soporte
Veepeak provides a one-year hassle-free replacement warranty for this product. For warranty claims or customer service inquiries, please contact Veepeak customer support through the retailer where the product was purchased or visit the official Veepeak websitio.
