1. Introducción
The FLAMMA FV04 Vocal Harmony Pedal is an all-in-one effects processor designed for both singers and guitarists. It provides a range of vocal harmony effects, dedicated reverb for both vocal and guitar inputs, and flexible output options, making it suitable for live performances, practice, and studio recording. This manual will guide you through the setup, operation, and features of your FV04 pedal.
2. Características principales
- 11 Harmony Modes: Offers a selection of 11 distinct harmony modes, with the ability to switch between major and minor scales for comprehensive tuning flexibility.
- Soporte de entrada dual: Accepts both guitar and microphone inputs, providing dedicated reverb effects for each.
- Flexible Output Options: Functions as an all-in-one effects solution, allowing users to choose between a mixed signal output or individual outputs for separate vocal and guitar channels.
- Phantom Power & Mic Preamp: Includes 48V phantom power support for condenser microphones and can also be utilized as a microphone ampmás duradero.
- Construcción duradera: Features a robust, full-metal blue casing designed for reliability and longevity, powered by the included 9V 500mA power supply.
3. Guía de configuración
Follow these steps to connect your FV04 pedal:
- Conexión de energía: Connect the included 9V 500mA power adapter to the 'DC IN' jack on the rear panel of the pedal.
- Entrada de micrófono: Connect your microphone to the 'MIC' XLR input. If using a condenser microphone, ensure the '48V' phantom power switch is engaged.
- Entrada de guitarra: Connect your guitar to the 'LINE IN' 1/4-inch jack.
- Conexión de salida: Connect the 'XLR OUT' to your mixer or audio interface for vocal output. Use the 'GUITAR OUT' 1/4-inch jack for guitar output. Refer to Section 6 for output mode configurations.
- Levantamiento de tierra: If experiencing hum or noise, toggle the 'LIFT/GND' switch to the 'LIFT' position to break ground loops.
Figure 3.1: Rear panel connections of the FV04 pedal.
4. Instrucciones de funcionamiento
The FV04 pedal features intuitive controls for easy operation:
- Perilla CLAVE: Rotate this knob to select the root key for your harmony effects. Options include C, D, E, F, G, A, B.
- Botón SHARP: Press this button to modulate the selected key to a higher semitone (e.g., C to C#, D to D#). Double-press quickly to switch between major and minor scales for the current root note. The SHARP button LED will blink when a minor scale is selected.
- Perilla de MODO: Turn this knob to select one of the 11 available harmony modes. Refer to Section 5 for a detailed list of modes.
- Perilla de NIVEL: Adjusts the overall level of the harmony effect. Turn clockwise to increase the effect level.
- Pedal: Press the footswitch to engage or bypass the harmony effect. The LED around the footswitch indicates the effect status.
Figure 4.1: Front panel controls of the FV04 pedal.
Figure 4.2: Selecting the root key with the KEY knob.
Figure 4.3: Major and minor scale selection.
5. Harmony Modes
The FV04 offers 11 distinct harmony modes, selectable via the MODE knob:
| Número | Modo armonía | Descripción |
|---|---|---|
| 1 | OCT- | One octave lower harmony. |
| 2 | 5to L | Lower fifth harmony. |
| 3 | 3er L | Lower third harmony. |
| 4 | 3er H | Higher third harmony. |
| 5 | 5ta H | Higher fifth harmony. |
| 6 | OCTUBRE+ | One octave higher harmony. |
| 7 | OCT- y OCT+ | Harmonies one octave lower and one octave higher. |
| 8 | 5.° L y 3.° H | Harmonies with a lower fifth and a higher third. |
| 9 | 5th L & 5th H | Harmonies with a lower fifth and a higher fifth. |
| 10 | 3rd L & 3rd H | Harmonies with a lower third and a higher third. |
| 11 | 3rd L & 5th H | Harmonies with a lower third and a higher fifth. |
Figure 5.1: Detailed list of Harmony Modes.
6. Modos de salida
The FV04 supports two main output configurations:
- Modo individual: This mode provides separate outputs for your guitar and vocal signals. The guitar signal exits via the 1/4-inch 'GUITAR OUT' jack, and the vocal signal (with effects) exits via the 'XLR OUT'.
- Modo de mezcla: In this mode, both the guitar and vocal signals are combined and sent through the 'XLR OUT'. This is useful for simplified setups where a single output to a mixer or amplifier is preferred.
To switch between output modes, refer to the product's quick start guide or the official FLAMMA website for specific button combinations, as this functionality is often accessed through a hidden setting or a combination of button presses during power-up.
Figure 6.1: Individual and Mix Output Modes.
7. Vocal Tone Modes (Hidden)
The FV04 includes three hidden vocal tone modes that can subtly shape your vocal sound:
- Modo CALIENTE: Indicated by a Red LED. Adds warmth and body to your vocal tone.
- BRIGHT Mode: Indicated by a Blue LED. Enhances clarity and presence in your vocal tone.
- Modo normal: Indicated by the LED being OFF. Provides a natural, unprocessed vocal tone.
To cycle through these vocal tone modes, press the SHARP button three times quickly. The LED color will change to indicate the active mode.
Figure 7.1: Vocal Tone Modes via SHARP button LED.
8. Efectos de reverberación
The FV04 features dedicated reverb effects for both vocal and guitar inputs, allowing you to add depth and space to your sound. The reverb parameters are typically controlled internally or through specific modes, providing a balanced and musical enhancement to your performance.
Figure 8.1: Reverb effects for vocal and guitar.
9. Especificaciones
| Especificación | Valor |
|---|---|
| Número de modelo | FV04 |
| Peso del producto | 363 g (0.8 libras) |
| Dimensiones del producto | 8.64 x 6.1 x 12.45 cm (3.4 x 2.4 x 4.9 pulgadas) |
| Interfaz de hardware | Audio de 1/4 de pulgada, XLR |
| Formato de señal | Digital |
| Fuente de poder | Eléctrico con cable |
| Volumentage | 9 voltios |
| Consumo de corriente | 500 mA |
10. Solución de problemas
If you encounter issues with your FV04 pedal, consider the following common solutions:
- Sin sonido:
- Ensure the power adapter is correctly connected and the pedal is receiving power.
- Check all audio cables (microphone, guitar, outputs) for secure connections.
- Verify that the footswitch LED is illuminated, indicating the effect is engaged.
- Adjust the 'LEVEL' knob to ensure the harmony effect is not set to zero.
- If using a condenser microphone, ensure the '48V' phantom power switch is engaged.
- Distortion/Unwanted Noise:
- Reduce the input gain on your microphone or guitar, or the 'LEVEL' knob on the pedal.
- Check the 'LIFT/GND' switch on the rear panel; try toggling it to 'LIFT' to eliminate ground hum.
- Ensure you are using the correct 9V 500mA power supply.
- Harmony Not Correct:
- Verify that the 'KEY' knob is set to the correct musical key for your performance.
- Check if the 'SHARP' button LED is blinking, indicating a minor scale is active. Adjust as needed.
- Ensure the 'MODE' knob is set to the desired harmony interval.
11. Mantenimiento
To ensure the longevity and optimal performance of your FLAMMA FV04 pedal:
- Limpieza: Utilice un paño suave y seco para limpiar la superficie del pedal. Evite usar limpiadores abrasivos, disolventes o ceras.
- Almacenamiento: Store the pedal in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
- Manejo: Evite dejar caer el pedal o someterlo a impactos fuertes.
- Fuente de alimentación: Always use the specified 9V 500mA power adapter to prevent damage.
12. Garantía y soporte
For detailed warranty information, product registration, or technical support, please visit the official FLAMMA website or contact your authorized FLAMMA dealer. Keep your purchase receipt as proof of purchase for warranty claims.
