Estructura de cama tapizada Queen Yaheetech

Información importante de seguridad

Lea y comprenda todas las instrucciones antes de ensamblar y usar. Conserve este manual para futuras consultas.

• Capacidad de peso: No exceda la capacidad máxima de peso de 794 libras (360 kg).
• Ajuste de la cabecera: Be cautious when adjusting the headboard height to prevent injury. Ensure all fasteners are securely tightened after adjustment.
• Asamblea: Assemble the bed frame on a soft, clean surface to prevent scratches. Ensure all parts are present before beginning assembly.
• Mantenimiento: Regularly check all bolts and connections to ensure they remain tight. Loose connections can lead to instability and potential injury.
• Niños: Mantenga las piezas pequeñas y los materiales de embalaje fuera del alcance de los niños para evitar peligro de asfixia.

Contenido del paquete

Verify that all components listed below are present before starting assembly. Refer to the assembly video for visual identification of parts.

Imagen: Explotó view of all bed frame components, including headboard, side rails, center support bars, legs, wooden slats, and hardware. Each part is labeled for easy identification during assembly.

Lista de piezas:

• A: Headboard (1 pc)
• B: Left Side Rail (1 pc)
• C1/C2: Wooden Slats (12 pcs total)
• D1/D2: Center Support Bars (2 pcs)
• E: Right Side Rail (1 pc)
• F: Headboard Support Legs (2 pcs)
• G: Center Support Leg (1 pc)
• H: Cross Support Bar (1 pc)
• I: Bed Legs (4 pcs)
• J: Headboard Brackets (2 pcs)
• K: Center Support Brackets (2 pcs)
• L: Corner Brackets (4 pcs)
• M: Side Rail Connectors (2 pcs)
• N: Footboard Connectors (2 pcs)
• O: Pernos (varios tamaños)
• P: Washers (various sizes)
• Q: Llave Allen (1 ud.)
• R: Tornillos (varios tamaños)
• S: Nueces (varios tamaños)

Instrucciones de montaje

Siga estos pasos cuidadosamente para un montaje correcto. Se incluye un vídeo de montaje como guía visual.

Guía paso a paso:

1. Attach Headboard Support Legs: Securely attach the Headboard Support Legs (F) to the Headboard (A) using the provided bolts (O) and washers (P). Use the Allen wrench (Q) to tighten.
2. Ensamblar los rieles laterales: Connect the Left Side Rail (B) and Right Side Rail (E) to the Headboard Support Legs (F) using the Side Rail Connectors (M) and appropriate hardware. Ensure a snug fit.
3. Install Center Support Bars: Attach the Center Support Bars (D1, D2) to the side rails. Connect the Cross Support Bar (H) between the two center support bars using bolts (O) and nuts (S).
4. Coloque las patas de soporte centrales: Fasten the Center Support Leg (G) to the Cross Support Bar (H) for additional stability.
5. Install Bed Legs: Screw the Bed Legs (I) into the designated corners of the bed frame.
6. Colocar listones de madera: Lay the Wooden Slats (C1, C2) across the bed frame. Secure them in place using the hook & loop fasteners or screws (R) as indicated in the video. Ensure even spacing for optimal mattress support.
7. Ajuste final: Double-check all bolts and screws to ensure they are fully tightened before placing the mattress on the frame.

Instrucciones de funcionamiento

Cabecero regulable en altura:

The upholstered headboard can be adjusted to your preferred height. It ranges from 44.5 inches to 48.5 inches. To adjust, loosen the bolts connecting the headboard to its support legs, slide the headboard to the desired height, and then securely re-tighten the bolts. This allows for optimal comfort when reading or relaxing in bed.

Imagen: A visual representation of the headboard's height adjustment mechanism, illustrating the range of 44.5 to 48.5 inches.

No se necesita somier:

This platform bed frame is designed to support your mattress directly, eliminating the need for a box spring. Simply place your latex, foam, or spring mattress on the wooden slats after assembly.

Mantenimiento

• Limpieza: Wipe the bed frame with a dry cloth to remove dust and debris. For upholstered areas, use a soft brush or vacuum with an upholstery attachment. Avoid harsh chemicals or abrasive cleaners.
• Controles periódicos: Periodically inspect all screws, bolts, and connections to ensure they are tight. Re-tighten any loose fasteners to maintain stability and prevent squeaking.
• Espacio debajo de la cama: La distancia al suelo de 6.3 pulgadas permite una fácil limpieza debajo de la cama, incluido el acceso para aspiradoras robóticas.

Imagen: A robot vacuum cleaner operating beneath the bed frame, demonstrating the convenient 6.3-inch underbed clearance for cleaning.

Solución de problemas

• Ruidos chirriantes: If the bed frame makes squeaking noises, check all bolts and screws. Tighten any loose fasteners. The frame is designed with EVA foam to minimize noise, but periodic checks are recommended.
• Inestabilidad/tambaleo: Ensure all connections are fully tightened. Verify that the center support legs are properly installed and making firm contact with the floor.
• Cambio de listones: Ensure the wooden slats are correctly positioned and secured by their hook & loop fasteners or screws. If any slats are damaged, contact customer support for replacements.

Presupuesto

Imagen: Detailed dimensions of the Yaheetech Queen Upholstered Bed Frame, including length, width, and adjustable headboard height.

Garantía y soporte

Para obtener información sobre la garantía, piezas de repuesto o asistencia adicional, contacte con el servicio de atención al cliente de Yaheetech. Consulte la documentación de compra para conocer los términos específicos de la garantía y la información de contacto.

You can also visit the official Yaheetech store for more products and support: Tienda Yaheetech