FUNLIO FL-032

FUNLIO Baby Jumper with Stand Instruction Manual

Modelo: FL-032

Brand: FUNLIO

Introducción

This instruction manual provides essential information for the safe and proper assembly, operation, and maintenance of your FUNLIO Baby Jumper with Stand. Designed for toddlers aged 6-24 months, this jumper offers a secure and engaging environment for indoor and outdoor play, promoting balance and muscle development. Please read this manual thoroughly before use and retain it for future reference.

Información importante de seguridad

ADVERTENCIA: Failure to follow these instructions could result in serious injury or death. Always ensure the safety of the child by adhering to all warnings and guidelines.

Diagram showing safety features of the FUNLIO Baby Jumper including safety lock carabiner, non-slip rubber feet, strong and flexible spring, three safety lock carabiners, adjustable seat belt, and wide and firm velcro seat belt.

Figure 1: Key Safety Features of the FUNLIO Baby Jumper. This image highlights the robust construction and safety components, including the strong spring, multiple safety carabiners, non-slip feet, and adjustable seat belt.

Certificates for CPSC, ASTM F963-17, and EN 71 standards for the FUNLIO Baby Jumper.

Figure 2: Safety Certifications. This image displays the certifications the product has received, including CPSC, ASTM F963-17, and European Standard EN 71, ensuring compliance with safety regulations.

Contenido del paquete

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support immediately.

Instrucciones de montaje

Assembly typically takes less than 10 minutes. Follow these steps carefully to ensure proper and safe setup.

  1. Desembale todos los componentes y colóquelos sobre una superficie limpia y plana.
  2. Assemble the main frame by connecting the leg poles to the horizontal bar. Ensure all connections click into place or are securely fastened with provided hardware.
  3. Attach the non-slip rubber feet to the bottom of each leg pole.
  4. Connect the spring assembly to the designated attachment point on the horizontal bar of the frame using the safety lock carabiners.
  5. Attach the jumper seat to the spring assembly using the remaining safety lock carabiners. Ensure the seat is facing the correct direction.
  6. Double-check all connections, screws, and carabiners to ensure they are tight and secure before allowing a child to use the jumper.
Diagram showing the dimensions of the assembled FUNLIO Baby Jumper and a baby inside it, along with age and weight recommendations.

Figure 3: Assembled Jumper Dimensions and Usage Guidelines. This image illustrates the overall dimensions of the assembled jumper (61in/155cm tall, 47in/120cm wide, 62in/158cm deep) and confirms the age range (6-24 months) and weight capacity (50lb/22kg).

Four-step visual guide for attaching the rubber ring, passing the screw, installing the nut, and finishing the assembly of the jumper's hanging mechanism.

Figure 4: Detailed Assembly Steps for Hanging Mechanism. This visual guide provides a step-by-step process for securing the hanging components of the jumper to the frame.

Instrucciones de funcionamiento

Placing Your Child in the Jumper:

  1. Ensure the jumper is on a stable, level surface.
  2. Carefully place your child into the jumper seat, ensuring their legs are positioned correctly through the leg openings.
  3. Fasten the wide and firm velcro seat belt securely around your child. Adjust the straps to ensure a snug but comfortable fit.
  4. Always supervise your child while they are in the jumper.

Ajuste de altura:

The jumper features a height-adjustable chain. To adjust the height, locate the adjustment mechanism on the chain. Ensure the child's feet can comfortably touch the ground or a firm surface, allowing for proper bouncing motion without overstretching or dangling. The chain can be adjusted by up to 10 inches (26 cm).

Uso en interiores y exteriores:

The FUNLIO Baby Jumper is designed for both indoor and outdoor use. When using outdoors, ensure the area is clear of hazards, and the ground is level. Avoid prolonged exposure to direct sunlight or rain to preserve the product's lifespan.

A baby happily bouncing in the FUNLIO Baby Jumper with an adult supervising in the background, demonstrating indoor use.

Figure 5: Child Enjoying the Jumper. This image shows a child actively using the jumper, highlighting its intended use for play and exercise.

Mantenimiento

Solución de problemas

ProblemaPosible causaSolución
Jumper does not bounce properly.Child's weight is too low for the spring tension, or height adjustment is incorrect.Ensure the child meets the minimum weight requirement. Adjust the chain height so the child's feet can push off the ground effectively.
Jumper feels unstable or wobbly.Not all connections are securely fastened; jumper is on an uneven surface; missing or damaged non-slip feet.Re-check all assembly points, ensuring screws and carabiners are tight. Move the jumper to a flat, level surface. Inspect and replace any damaged non-slip feet.
Parts appear loose or damaged after use.Normal wear and tear; improper assembly; excessive force during use.Immediately cease use. Inspect the specific part. If a screw or connection point is loose, tighten it. If any part (especially structural components like screws, springs, or frame joints) is bent, cracked, or broken, do not use the product. Contact customer support for replacement parts or assistance.

Presupuesto

Garantía y soporte

FUNLIO is committed to providing high-quality products and customer satisfaction.

Documentos relacionados - FL-032

Preview Manual de usuario y guía de montaje del caballito balancín unicornio FUNLIO
Manual de usuario completo para el caballito balancín Unicornio FUNLIO (modelo FL-010). Incluye instrucciones de montaje detalladas, lista de piezas, guía de accesorios e información sobre la garantía estándar de un año. Garantiza un montaje seguro y correcto del juguete de su hijo/a.
Preview Manual de usuario y guía de montaje del columpio de madera FUNLIO
Manual de usuario completo y guía de montaje para el columpio de madera FUNLIO. Aprenda a instalar, plegar y cuidar su columpio infantil. Incluye lista de piezas, pasos de instalación e información sobre la garantía.
Preview Certificado de producto infantil para columpios de madera FUNLIO
Este documento certifica que el columpio de madera FUNLIO, modelo FL-008, cumple con las normas de seguridad de productos de la CPSC, incluidas las normas ASTM F963-17 y 16 CFR Parte 1250, así como con las normas de la CPSIA relativas al plomo y los ftalatos. Detalla la identificación del producto, las normas de seguridad que cumple, la información del importador, los resultados de las pruebas y el laboratorio acreditado que las realizó.
Preview Manual de instalación y funcionamiento del caudalímetro OMEGA serie FL-800
Guía completa del medidor de caudal de la serie OMEGA FL-800, que cubre instalación, operación, mantenimiento, consejos de precisión, especificaciones, advertencias de seguridad, garantía e información de contacto.
Preview SAUTER FL Digital Force Gauge Operating Manual
Operating manual for the SAUTER FL digital force gauge, covering technical specifications, functions, operation, safety warnings, and calibration procedures for precise force measurement.