1. Producto terminadoview
This manual provides instructions for the safe and efficient operation, installation, and maintenance of your AERMEC 12000 BTU Inverter Heat Pump Air Conditioner, model MONO-12-E (SPG350). This split-system unit is designed for both cooling and heating residential environments.
Imagen 1.1: The AERMEC 12000 BTU Inverter Heat Pump Air Conditioner, showing both the indoor wall-mounted unit and the outdoor compressor unit.
Información de seguridad
Read all safety warnings and instructions carefully before installing or operating the appliance. Keep this manual for future reference. Only qualified personnel should perform installation and servicing. Ensure the power supply matches the unit's specifications (230 Volts).
2. Configuración e instalación
The AERMEC SPG350 is a split-system air conditioner consisting of an indoor unit and an outdoor unit. Professional installation is highly recommended to ensure proper function and safety.
Consideraciones clave de instalación:
- Ubicación: Select appropriate locations for both the indoor wall-mounted unit and the outdoor compressor unit, ensuring adequate airflow and clearance.
- Conexión eléctrica: The unit requires a 230 Volt power supply. All electrical work must comply with local codes and regulations.
- Refrigerante: This system uses R32 refrigerant. Handling of refrigerant should only be performed by certified technicians.
- Drenaje: Asegúrese de que el drenaje del condensado sea adecuado desde la unidad interior.
- Montaje: Securely mount the indoor unit to a wall and the outdoor unit on a stable surface, following manufacturer guidelines.
3. Instrucciones de funcionamiento
The AERMEC SPG350 offers multiple operating modes and features for optimal comfort.
Modos de funcionamiento:
- Enfriamiento: Reduce la temperatura ambiente.
- Calefacción: Aumenta la temperatura ambiente (función bomba de calor).
- Deshumidificación: Elimina el exceso de humedad del aire.
- Sólo ventilación: Hace circular el aire sin enfriar ni calentar.
- Automático: Automatically selects the appropriate mode based on the set temperature and ambient conditions.
Funciones especiales:
- Minutero: Programe la unidad para que se encienda o se apague en horarios específicos.
- Función turbo: Proporciona enfriamiento o calentamiento rápido para alcanzar rápidamente la temperatura deseada.
- Función del sueño: Adjusts temperature and fan speed for comfortable nighttime operation.
- Función X-Fan: Prolonged ventilation after shutdown to dry the indoor coil, helping to prevent mold formation.
- Función automática: Continuously varies fan speeds for optimal comfort.
- Smart APP Control (Optional): The indoor unit is pre-arranged for remote control via the Smart APP Ewpe, requiring a separate WiFi accessory (not included).
4. Mantenimiento
El mantenimiento regular garantiza la longevidad y la eficiencia de su aire acondicionado.
Tareas clave de mantenimiento:
- Limpieza del filtro de aire: The indoor unit features a regenerable and easily accessible air filter. Clean the filter regularly (e.g., every two weeks or as needed) to maintain airflow and efficiency. Refer to the specific instructions for filter removal and cleaning.
- Función X-Fan: Utilize the X-Fan function to prevent mold and mildew growth within the indoor unit.
- Limpieza exterior: Wipe the exterior surfaces of both units with a soft, damp paño. No utilice productos químicos agresivos ni limpiadores abrasivos.
- Servicio Profesional: Annual professional inspection and cleaning are recommended to check refrigerant levels, electrical connections, and overall system performance.
5. Solución de problemas
Before contacting service personnel, review Los siguientes problemas comunes y soluciones.
| Problema | Posible causa | Solución |
|---|---|---|
| La unidad no se enciende. | No hay energía, se disparó el disyuntor, las baterías del control remoto están bajas. | Verifique la fuente de alimentación, reinicie el disyuntor, reemplace las baterías del control remoto. |
| Refrigeración/calefacción insuficiente. | Dirty air filter, blocked outdoor unit, incorrect mode setting, room too large. | Clean air filter, clear obstructions from outdoor unit, select correct mode, ensure unit capacity matches room size. |
| Ruido inusual. | Piezas sueltas, objetos extraños, ruidos de funcionamiento normales (por ejemplo, flujo de refrigerante). | Inspect for loose parts or objects. If noise persists or is unusual, contact service. |
| Fuga de agua de la unidad interior. | Tubería de drenaje bloqueada, instalación incorrecta. | Check and clear drain pipe. If issue persists, professional inspection is required. |
If problems persist after attempting these solutions, contact qualified service personnel for assistance. Do not attempt to repair the unit yourself.
6. Especificaciones
Technical details for the AERMEC MONO-12-E (SPG350) air conditioner.
Indoor Unit (SPG350W):
- Fuerza: 12000 BTU
- Instalación: Montado en la pared
- Dimensiones (alto x ancho x profundidad): 275 x 790 x 200 mm
- Peso: 9 kilogramos
- Wi-Fi: Pre-arranged (accessory not included)
- Características: Regenerable air filter, Timer, Turbo function, Sleep function, X-Fan function, LED display.
Outdoor Unit (SPG350):
- Poder de enfriamiento: 3.2 kW
- Poder de calefacción: 3.5 kW
- Gas refrigerante: R32
- Nivel de ruido: 52 dBA
- Dimensiones (alto x ancho x profundidad): 596 x 848 x 320 mm
- Peso: 31 kilogramos
- Connectable Indoor Units: 1
Especificaciones generales:
- Marca: AERMEC
- Modelo: MONO-12-E
- Volumentage: 230 voltios
- Quétage: 7500 vatios
- Capacidad: 1 Tonne (equivalent to 12000 BTU)
- Dimensiones totales del paquete: 90 x 90 x 60 cm
- Peso total del paquete: 51 kilogramos
7. Garantía y soporte
For warranty information, please refer to your purchase documentation or contact your retailer. This product is eligible for returns within 14 days of delivery, as per standard policy.
For specialized customer assistance, please contact your point of purchase or the AERMEC support channels provided with your product.
