BTF-LIGHTING WS2805 IC RGBCCT Addressable Dual Data LED Strip User Manual

Introducción

This manual provides detailed instructions for the installation, operation, and maintenance of your BTF-LIGHTING WS2805 IC RGBCCT Addressable Dual Data LED Strip. Please read this manual thoroughly before use to ensure proper functionality and safety.

Características del producto

Dual-Signal Data Transmission: Features signal break-point continuous transmission, ensuring that if one pixel is damaged, subsequent LEDs continue to function.
RGBCCT 5-in-1 LED: Each 5050 SMD LED integrates Red, Green, Blue, Warm White (3000K), and Cool White (6500K) for a wide range of colors and tunable white light.
Addressable Control: Equipped with WS2805 IC chips, allowing individual control of groups of 3 LEDs for dynamic chasing, wave, jump, and static effects.
Diseño cortable: The strip can be cut every 3 LEDs at designated cut marks, offering flexibility for custom installations.
Wide Color Temperature Range: Tunable white light from 3000K (Warm White) to 6500K (Cool White).
Requisito de energía: Operates on DC12V. A power supply and controller are required and sold separately.

Qué incluye

El paquete contiene:

1x 16.4FT (5 meters) WS2805 IC RGBCCT 300LED Light Strip
1x 4-pin JST connector

Note: A DC12V power supply and a compatible controller are required for operation and must be purchased separately.

BTF-LIGHTING WS2805 LED Strip in packaging — Image: The BTF-LIGHTING WS2805 LED strip shown in its retail packaging, indicating the included components.

Configuración e instalación

Prepare la superficie de instalación: Ensure the surface is clean, dry, and smooth. For IP30 and IP65 strips, the self-adhesive backing requires a suitable surface for proper adhesion. IP67 strips do not have adhesive and require clips and screws for mounting.
Planifique su diseño: Determine the desired length and path for the LED strip. The strip can be cut every 3 LEDs at designated cut marks.
Conecte el controlador: Connect the 4-pin JST connector from the LED strip to a compatible DC12V RGBCCT controller (sold separately). Ensure correct polarity and pin alignment.

Diagram showing how to connect the LED strip to a controller and power supply — Image: A diagram illustrating the connection of the WS2805 SPI RGBCCT LED Strip to a DC12V power supply and an SP630E controller. This shows the wiring for +12V, DIN, BIN, and GND.

Conecte la fuente de alimentación: Connect a DC12V power supply (sold separately) to your controller. Do not use a DC24V power supply with this DC12V strip.
Secure the LED Strip:
- For IP30/IP65: Peel off the protective backing from the double-sided tape and firmly press the strip onto the prepared surface.
- For IP67: Use the provided screws and clips to secure the strip along your desired path.

Images demonstrating the WS2805 IC chip, adhesive backing, cut points, and connection wires — Image: Visual guide showing the WS2805 IC chip, the adhesive backing for IP30/IP65 versions, designated cut points on the strip, and the wiring for connection.

Conexión de la serie y volumentagSuplementación: For longer installations or to prevent voltage drop, consider series connections with voltage supplementation as shown in the diagram below.

Diagram illustrating series connection and voltage supplementation for LED strips — Image: A technical diagram demonstrating two methods for connecting multiple LED strips in series, including how to apply voltage supplementation to maintain consistent brightness over longer runs.

Instrucciones de funcionamiento

Once the LED strip is properly installed and connected to a compatible controller and power supply, you can operate it using the controller's interface (e.g., remote control or smartphone app).

Selección de colores: Choose from 16 million colors using the RGB color palette on your controller's app.
Luz blanca sintonizable: Adjust the white light temperature from 3000K (Warm White) to 6500K (Cool White) to suit your preference.
Efectos dinámicos: Select from various chasing, wave, jump, and static lighting effects.
Ajuste de brillo: Control the overall brightness of the LED strip.

Example of pure white light and chasing RGB color effects in a home setting — Image: Demonstrates the versatility of the LED strip, showcasing both pure white light (3000K to 6000K) for ambient lighting and dynamic chasing RGB color effects for decorative purposes in different home environments.

Image showing temperature and brightness adjustment sliders for LED strip control — Image: An illustration of how temperature (2700K-6500K) and brightness (1%-100%) can be adjusted, along with a color spectrum for 'Dream Color' effects, indicating comprehensive control options.

Video: Demonstrates the WS2805 IC RGBCCT Addressable Dual Data LED Strip in action, showcasing various chasing RGB effects, chasing pure white lighting effects, 16 million monochrome effects, and pure white color options. A controller and adapter are sold separately.

Video: Highlights the WS2805 RGBCCT 5-in-1 IC LED Strip, demonstrating its ability to produce a wide spectrum of colors and tunable white light, emphasizing its versatility for various lighting applications.

Mantenimiento

Limpieza: Gently wipe the LED strip with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials.
Protección del agua:
- IP30: Not waterproof. Suitable for indoor dry environments only.
- IP65: Silicone coating provides dust prevention and water splash protection. Suitable for indoor use where splashes may occur, but not for submersion.
- IP67: Sheathing waterproof design. Can work outdoors, but ensure 4-pin connectors are protected from water.

Comparison of IP65 silicone coating waterproof and IP67 sheathing waterproof LED strips — Image: Illustrates the difference between IP65 silicone coating, which offers dust and water splash protection for indoor use, and IP67 sheathing waterproof, suitable for outdoor use with protected connectors.

Integridad de la conexión: Revise periódicamente todas las conexiones para asegurarse de que estén seguras y libres de corrosión.

Solución de problemas

Problema	Posible causa	Solución
La tira de LED no se enciende.	No power, incorrect connection, faulty power supply/controller.	Verify power supply is connected and functional. Check all wiring connections for correct polarity and secure fit. Ensure the controller is powered on and set to an active mode.
Partial section of the strip is not lighting up.	Damaged LED segment, signal interruption.	Due to dual-signal design, if one pixel is damaged, subsequent LEDs should still work. If a section is out, inspect the specific segment for physical damage or a loose connection at the cut point.
Los colores son incorrectos o inconsistentes.	Controller settings, data line issue.	Check your controller settings to ensure the correct LED type (WS2805 RGBCCT) is selected. Verify data line connection.
Strip flickers or shows unstable lighting.	Insufficient power, loose connections, voltage gota.	Ensure your power supply provides adequate current for the entire strip length. Check all connections for looseness. Consider voltage supplementation for longer runs.

Diagram of WS2805 IC RGBCCT LED strip showing 5 colors in 1 5050SMD LED and dual data lines — Imagen: Detallada view of the WS2805 IC RGBCCT LED strip, highlighting the 5-in-1 5050SMD LED structure (Cold White, Warm White, RGB) and the WS2805 IC chip with its dual data (DIN, BIN) and ground (GND) connections, which enable signal break-point continuous transmission.

Image of a coiled LED strip with a defective section and a fully lit strip without voltage gota — Image: Illustrates the "Break-Point Transmission" feature of the WS2805 LED strip, where a defective section does not prevent the rest of the strip from functioning. Also shows a fully lit strip demonstrating "No Voltage Drop" for up to 16.4 feet at maximum white brightness.

Presupuesto

Característica	Detalle
Número de modelo	HD-12V-WS2805-60L-B-IP30
Tipo de LED	5050 SMD RGBCCT (5 Colors in 1 LED)
Chip IC	WS2805 (Dual Data)
Densidad de LED	60 LED/metro
Densidad de píxeles	20 Pixels/meter (1 IC controls 3 LEDs)
Longitud de la tira	16.4 pies (5 metros)
Volumentage	12 V CC
Quétage	30 vatios
Temperatura de color	3000K-6500K (blanco sintonizable)
Clasificación de impermeabilidad	IP30 (no resistente al agua)
Características especiales	Chasing Color, Dual Signal, Groups of 3 LEDs Addressable, Dimmable
Vida media	50,000 horas
Método de control	App Control, Remote Control (Controller sold separately)
Peso del artículo	4.2 onzas

Garantía y soporte

Para obtener información sobre la garantía y soporte técnico, consulte el sitio web oficial de BTF-LIGHTING. webSitio web o contacte directamente con el servicio de atención al cliente. Conserve el recibo de compra para reclamaciones de garantía.

You can visit the BTF-LIGHTING Store on Amazon for additional products and support: BTF-LIGHTING Amazon Store.

	Manual del usuario de la tira LED BTF-LIGHTING WS2805 IC RGBCCT Manual de usuario completo para la tira LED direccionable BTF-LIGHTING WS2805 IC RGBCCT, que cubre especificaciones, instalación, precauciones y compatibilidad del controlador.
	Manual del usuario de la tira LED RGBCCT SMD 5050 de BTF-LIGHTING Manual de usuario completo para la tira LED SMD 5050 RGBCCT de BTF-LIGHTING, que detalla las especificaciones del producto, las instrucciones de instalación y la solución de problemas para esta versátil tira LED de 5 colores en 1.
	Manual de usuario de la tira LED RGBW SMD 5050 de BTF-LIGHTING Manual de usuario de la tira LED SMD RGBW 5050 BTF-LIGHTING, que detalla los parámetros del producto, la instalación, las precauciones y la solución de problemas para obtener soluciones de iluminación óptimas.
	Manual de usuario de la tira LED RGBW 5050SMD de BTF-LIGHTING Manual de usuario para la tira LED BTF-LIGHTING 5050SMD RGBW de 4 colores en 1, que incluye especificaciones del producto, guías de instalación, precauciones y solución de problemas. Aprenda a configurar y usar su iluminación LED.
	Manual del usuario de la tira LED BTF-LIGHTING FCOB SPI RGBCCT Manual de usuario de la tira LED FCOB SPI RGBCCT de BTF-LIGHTING, que detalla las especificaciones del producto, la instalación, las precauciones y los accesorios recomendados.
	Manual del usuario de la tira LED FCOB PWM RGBCCT de BTF-LIGHTING Manual de usuario para la tira LED FCOB PWM RGBCCT BTF-LIGHTING, que detalla los parámetros del producto, las instrucciones de instalación, las precauciones y la compatibilidad del controlador.

BTF-LIGHTING HD-12V-WS2805-60L-B-IP30