1. Producto terminadoview
The ATOMSTACK A6 Pro is a versatile 2-in-1 laser engraving and cutting machine designed for both beginners and enthusiasts. Featuring a unibody frame, it requires no assembly, allowing for immediate use right out of the box. It boasts a 6000mW output laser power with advanced beam compression technology for stable cuts and precise engraving on a variety of materials.
Figure 1: ATOMSTACK A6 Pro Laser Engraver with various engraved sampLes.
2. Información de seguridad
Operating a laser engraver requires strict adherence to safety guidelines to prevent injury. The ATOMSTACK A6 Pro is a Laser Class 4 device. Always wear the provided UV-filtering eye protection during operation. Ensure the machine is placed on a stable, level surface. The integrated tilt detector will trigger an alarm if the machine is moved or tilted excessively during operation. An emergency stop button is provided for immediate shutdown in critical situations.
- Utilice siempre protección ocular adecuada.
- Asegúrese de que haya una ventilación adecuada para disipar los humos y vapores.
- No deje la máquina desatendida durante el funcionamiento.
- Mantenga los materiales inflamables lejos del área de trabajo.
- Familiarícese con el procedimiento de parada de emergencia.
- Mantenga a los niños y a las mascotas alejados de la máquina en funcionamiento.
3. Contenido del paquete
The ATOMSTACK A6 Pro comes pre-assembled in a unibody frame, minimizing setup time. Upon unboxing, verify that all components are present and undamaged.
Figure 2: The ATOMSTACK A6 Pro is ready to use directly from its packaging.
Artículos incluidos:
- ATOMSTACK A6 Pro Laser Engraver (Unibody Frame)
- Laser Module (6000mW output)
- Adaptador de corriente
- Cable USB
- UV-Filtering Eye Protection Goggles
- Manual de usuario (este documento)
- Basic Material Samples for Testing
4. Configuración
The ATOMSTACK A6 Pro is designed for minimal setup. Its unibody frame means no complex assembly is required.
Pasos de configuración inicial:
- Deshacer: Carefully remove the engraver from its packaging.
- Colocación: Place the machine on a stable, flat, and heat-resistant surface in a well-ventilated area.
- Conecte la electricidad: Plug the power adapter into the machine and then into a suitable power outlet.
- Conectarse a la computadora (opcional): Connect the engraver to your computer using the provided USB cable if you plan to use PC software.
- Instalar software/aplicación: Download and install the recommended software (AtomStack Studio, LightBurn, or LaserGRBL for PC) or the ATOMSTACK mobile app (for Android/iOS) on your control device.
Video 1: Unboxing and quick setup of the ATOMSTACK A6 Pro, demonstrating its no-assembly design.
5. Instrucciones de funcionamiento
The ATOMSTACK A6 Pro offers multiple control methods for flexibility in your projects.
Figure 3: Diverse control methods for the ATOMSTACK A6 Pro.
Métodos de control:
- Software para PC: Use AtomStack Studio (exclusive, free), LightBurn, or LaserGRBL for detailed control and design.
- Aplicación para smartphone: Control the engraver via Wi-Fi using the ATOMSTACK mobile app (available on Android and Apple App Store).
Proceso de grabado y corte:
- Diseño: Create or import your design using your chosen software/app.
- Colocación de materiales: Place the material to be engraved or cut within the working area. The enlarged working area of 365x305mm (14.37x12 inches) allows for multitasking.
- Ajuste de enfoque: Utilize the fixed-focus design for rapid and precise focusing in approximately 10 seconds. The newly added cross laser positioning feature provides clear visibility of the laser's location for perfect alignment.
- Ajustes: Adjust laser power, speed, and passes according to the material type and desired effect. Refer to the material compatibility section for general guidelines.
- Iniciar operación: Initiate the engraving or cutting process from your control device.
- Recuperación de fallas de energía: The advanced automatic power failure recovery system memorizes the exact engraving position and resumes from the paused point, ensuring uninterrupted production and material saving.
Video 2: Demonstration of the ATOMSTACK A6 Pro's engraving and cutting capabilities on various materials.
6. Compatibilidad de materiales
The ATOMSTACK A6 Pro is capable of engraving and cutting a wide range of materials due to its 6000mW output laser power and ultra-fine laser focus area (0.05x0.05mm).
Figure 4: Diverse materials compatible with the ATOMSTACK A6 Pro.
Engraving Capabilities:
- Directly engrave stainless steel, ceramics, and glass.
- Achieves clear effects on wood, leather, paper, acrylic, and more.
Capacidades de corte:
- Cuts 3mm paulownia wood, 3mm black acrylic, and 3mm plywood in a single pass.
- Cuts 6mm thick plywood and 6mm black acrylic in multiple passes.
- Suitable for basswood, pine wood, bamboo, and leather.
Figure 5: The ATOMSTACK A6 Pro provides stable laser cuts on various materials.
7. Funciones y tecnología avanzadas
- Alta precisión: Mechanical precision can reach 0.02mm, benefiting from the unibody frame and modular assembly.
- Amazing Work Speed: Maximum engraving speed up to 600mm/s, significantly faster than traditional frame machines.
- 32-Bit Smart Motherboard: Features the ATOMSTACK self-developed ESP-32 built-in motherboard for intelligent and simple operation.
- 4-Way Limit Switches: Located on X and Y axes to prevent equipment collision with edges.
- Danger Alert System: Includes flame detector and gyroscope (tilt detector) to trigger emergency stops for safety.
- Tank Chain Design: New wiring harness design for aesthetics and extended machine lifespan.
- Cerradura de seguridad: Prevents unauthorized use, especially by children, and deters theft.
- Dual-Axis Guideway: High-precision wear-resistant slide rails and 4-way hard limiters reduce wear and tear.
- Detachable Eye Protection: Laser shield with magnetic absorption protects eyes and prevents laser lenses from smoke and dust accumulation.
Figure 6: The ATOMSTACK A6 Pro offers significantly faster engraving speeds.
Figure 7: The ATOMSTACK A6 Pro provides higher precision engraving.
8. Mantenimiento
El mantenimiento regular garantiza la longevidad y el rendimiento óptimo de su ATOMSTACK A6 Pro.
- Limpieza: Regularly clean the laser lens and the working area to prevent dust and debris buildup, which can affect engraving quality. Use a soft, lint-free cloth.
- Lubricación: Periodically check and lubricate the guide rails to ensure smooth movement of the laser module.
- Actualizaciones de firmware: Consulta la información oficial de ATOMSTACK website or app for any available firmware updates to ensure your machine has the latest features and improvements.
- Almacenamiento: Cuando no esté en uso, guarde el grabador en un entorno limpio y seco, alejado de la luz solar directa y de temperaturas extremas.
9. Solución de problemas
Esta sección ofrece orientación general para problemas comunes. Para obtener información detallada sobre la solución de problemas, consulte los recursos de soporte oficiales de ATOMSTACK.
| Problema | Posible causa | Solución |
|---|---|---|
| El láser no dispara o la salida es débil | Incorrect focus; dirty lens; low power setting; material incompatibility. | Adjust focus; clean lens; increase power setting; verify material compatibility. |
| Engraving/Cutting not precise | Loose belts/components; unstable surface; incorrect speed setting. | Check and tighten components; ensure stable surface; adjust speed. |
| La máquina no se conecta a la PC/aplicación | USB cable issue; Wi-Fi connectivity problem; driver issue; software conflict. | Try different USB port/cable; check Wi-Fi connection; reinstall drivers/software. |
| Parada de emergencia activada inesperadamente | Machine tilted; flame/smoke detected; limit switch activated. | Check machine stability; ensure proper ventilation; verify limit switch clearance. |
10. Especificaciones
| Característica | Detalle |
|---|---|
| Modelo | A6 Pro |
| Potencia de salida del láser | 6000 mW (6 W) |
| Tamaño del punto láser | 0.05 x 0.05mm (Ultra-fine compressed spot) |
| Precisión del grabado | 0.02 mm |
| Velocidad de grabado (máx.) | 600 mm/s |
| Área de trabajo | 365 x 305 mm (14.37 x 12 pulgadas) |
| Material del marco | Aluminum Alloy (Unibody) |
| Métodos de control | PC Software (AtomStack Studio, LightBurn, LaserGRBL), Smartphone App (Wi-Fi) |
| Características de seguridad | 4-Way Limit Switches, UV-Filtering Eye Protection, Tilt Detector, Emergency Stop Button, Safety Lock |
| Fuente de poder | AC/DC |
| Volumentage | 24 voltios |
| Peso del artículo | 17.91 libras |
| Dimensiones del producto | 23.22 x 23.22 x 7.08 pulgadas |
11. Garantía y soporte
The ATOMSTACK A6 Pro comes with a Garantía del fabricante de 1 años. For technical support, troubleshooting assistance, or warranty claims, please contact ATOMSTACK customer service through their official websitio o la información de contacto proporcionada en el embalaje de su producto.
Visit the official ATOMSTACK Store for additional accessories and product information: Tienda oficial de ATOMSTACK
