Sharp Plasmacluster Humidifying Air Purifier

1. Introducción

Gracias por la compraasing the Sharp Plasmacluster Humidifying Air Purifier, Model KC-35T7. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before use and keep it for future reference.

This advanced air purifier is designed to improve your indoor air quality by reducing harmful gases such as formaldehyde and other Volatile Organic Compounds (VOCs). It features a powerful purification function, integrated humidification, and a convenient display for humidity and temperature.

2. Información de seguridad

Para garantizar un funcionamiento seguro y evitar daños al producto o lesiones a usted mismo o a otras personas, tenga en cuenta las siguientes precauciones de seguridad:

• Always use the appliance with the correct voltage como se especifica en la etiqueta de clasificación.
• No bloquee las rejillas de entrada o salida de aire.
• Do not insert fingers or objects into any openings.
• Unplug the appliance before cleaning, performing maintenance, or when not in use for extended periods.
• Do not operate the appliance near flammable gases or combustible materials.
• Mantenga el aparato alejado del agua y la humedad. No lo sumerja en agua.
• Ensure the water tank is properly installed before operating the humidification function. Use only clean tap water in the water tank.
• Este aparato no está diseñado para ser utilizado por personas (incluidos niños) con capacidades físicas, sensoriales o mentales reducidas, o con falta de experiencia y conocimientos, a menos que hayan recibido supervisión o instrucciones sobre el uso del aparato por parte de una persona responsable de su seguridad.

3. Identificación de piezas

Familiarize yourself with the main components of your Sharp Plasmacluster Humidifying Air Purifier:

Figura 3.1: Frente View del purificador de aire. This image displays the main body of the Sharp KC-35T7 air purifier, highlighting the control panel at the top, the air intake grille, and the Plasmacluster logo. The unit is white with black accents on the sides.

Figure 3.2: Air Purifier with Dimensions. Esta imagen proporciona una perspectiva view of the Sharp KC-35T7, illustrating its approximate dimensions: 38 cm (width), 19.7 cm (depth), and 57 cm (height). These measurements are crucial for proper placement and space planning.

Componentes clave:

• Panel de control: Located on the top, with buttons for power, mode selection, fan speed, and display.
• Toma de aire: Located on the front and sides, where air is drawn into the unit.
• Salida de aire: Situado en la parte superior, desde donde se libera el aire purificado y humidificado.
• Tanque de agua: Tanque extraíble para humidificación, generalmente ubicado en el costado o en la parte posterior.
• Filtros: Internal filters (e.g., HEPA, deodorizing) for air purification.

4. Configuración

Follow these steps for the initial setup of your air purifier:

1. Desembalaje: Carefully remove the air purifier from its packaging. Retain the packaging materials for future transport or storage.
2. Instalación de filtro: Open the rear panel of the unit. Remove all protective plastic bags from the filters (e.g., HEPA filter, deodorizing filter) and install them according to the markings inside the unit. Ensure they are securely in place. Close the rear panel.
3. Fill Water Tank (for Humidification): Remove the water tank from the unit. Open the water tank cap and fill it with clean tap water up to the maximum fill line. Close the cap securely and reinsert the water tank into the unit until it clicks into place.
4. Colocación: Place the air purifier on a flat, stable surface, ensuring there is adequate space (at least 20 cm) around the air intake and outlet for optimal airflow. Avoid placing it directly against a wall or near heat sources.
5. Conexión de energía: Conecte el cable de alimentación a una toma eléctrica adecuada.

5. Instrucciones de funcionamiento

Learn how to operate your Sharp Plasmacluster Humidifying Air Purifier:

Encendido/apagado:

• Presione el Fuerza Botón en el panel de control para encender o apagar la unidad.

Selección de modo:

La unidad normalmente ofrece varios modos de funcionamiento:

• Modo automático: The unit automatically adjusts fan speed and humidification based on detected air quality and humidity levels.
• Modo de purificación de aire: Operates solely as an air purifier.
• Modo de humidificación: Operates with humidification function active.
• Plasmacluster Spot Mode: Concentrates Plasmacluster ions for targeted deodorization or purification.

Presione el Modo button repeatedly to cycle through available modes.

Ajuste de velocidad del ventilador:

Ajuste la velocidad del ventilador según sus preferencias:

• Presione el Velocidad del ventilador button to select between Low, Medium, High, or Silent settings.

Humidity/Temperature Display:

The display shows current room humidity and temperature. This information helps you monitor your indoor environment and adjust settings as needed.

6. Mantenimiento

Regular maintenance ensures optimal performance and extends the lifespan of your air purifier. Always unplug the unit before cleaning.

Limpieza y reemplazo de filtros:

• Prefiltro: Clean the pre-filter (mesh filter) regularly, approximately once a month, or more often if used in a dusty environment. Use a vacuum cleaner to remove dust or wash it with water and mild detergent. Ensure it is completely dry before reinstallation.
• Filtro HEPA: The HEPA filter cannot be washed. Replace it approximately every 2-5 years, depending on usage and air quality. Refer to the indicator light on the control panel for replacement timing.
• Filtro desodorizante: The deodorizing filter also cannot be washed. Replace it at the same interval as the HEPA filter.

Water Tank and Humidifying Filter Cleaning:

• Tanque de agua: Clean the water tank weekly to prevent mold and bacteria growth. Rinse with clean water and use a soft brush or cloth to remove any residue.
• Humidifying Filter/Tray: Clean the humidifying filter and tray monthly. Remove any mineral deposits or slime using a soft brush and a mild descaling solution (e.g., citric acid solution) if necessary. Rinse thoroughly with clean water and ensure all parts are dry before reassembly.

Limpieza exterior:

• Wipe the exterior of the unit with a soft, dry cloth. For stubborn stains, use a damp cloth with a mild detergent, then wipe dry. Do not use abrasive cleaners or solvents.

7. Solución de problemas

Si tiene problemas con su purificador de aire, consulte los siguientes problemas y soluciones comunes:

Si el problema persiste después de intentar estas soluciones, comuníquese con el servicio de atención al cliente.

8. Especificaciones

Detailed technical specifications for the Sharp Plasmacluster Humidifying Air Purifier KC-35T7:

9. Garantía y soporte

Your Sharp Plasmacluster Humidifying Air Purifier is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.

For technical assistance, service, or to inquire about replacement parts and filters, please contact Sharp customer support. Contact information can typically be found on the manufacturer's official websitio o en su recibo de compra.

When contacting support, please have your product model number (KC-35T7) and serial number (if applicable) ready.